panelized design

scripts/gcode/outline.ngc

@@ -0,0 +1,118 @@
+( pcb2gcode 2.5.0 )
+( Software-independent Gcode )
+
+G94 ( Millimeters per minute feed rate. )
+G21 ( Units == Millimeters. )
+
+G90 ( Absolute coordinates. )
+G00 S24000 ( RPM spindle speed. )
+G01 F400.00000 ( Feedrate. )
+
+
+G00 Z35.00000 (Retract to tool change height)
+T1
+M5      (Spindle stop.)
+G04 P1.00000 (Wait for spindle to stop)
+(MSG, Change tool bit to cutter diameter 2.10000mm)
+M0      (Temporary machine stop.)
+M3 ( Spindle on clockwise. )
+G04 P1.00000 (Wait for spindle to get up to speed)
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z2.00000 ( retract )
+
+G00 X-52.36997 Y-69.99999 ( rapid move to begin. )
+G01 Z-4.00000 F50.00000 ( plunge. )
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G01 F400.00000
+G01 X-52.36999 Y-46.29489
+G00 Z0.00000
+G01 X-52.37000 Y-43.69489
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-52.37002 Y-19.98980
+G01 X-52.38104 Y-19.84779
+G01 X-52.41119 Y-19.70860
+G01 X-52.43329 Y-19.64085
+G01 X-52.46408 Y-19.56547
+G01 X-52.53169 Y-19.44012
+G01 X-52.61561 Y-19.32506
+G01 X-52.71437 Y-19.22239
+G01 X-52.77673 Y-19.17007
+G01 X-52.83451 Y-19.12833
+G01 X-52.95785 Y-19.05714
+G01 X-53.06085 Y-19.01330
+G01 X-53.17782 Y-18.97827
+G01 X-53.29806 Y-18.95706
+G01 X-53.41998 Y-18.94997
+G01 X-102.11998 Y-18.94997
+G00 Z0.00000
+G01 X-104.71998 Y-18.94997
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-153.41998 Y-18.94997
+G01 X-153.50134 Y-18.95312
+G01 X-153.57216 Y-18.96105
+G01 X-153.71135 Y-18.99120
+G01 X-153.77909 Y-19.01330
+G01 X-153.85448 Y-19.04408
+G01 X-153.97983 Y-19.11170
+G01 X-154.09489 Y-19.19562
+G01 X-154.19755 Y-19.29437
+G01 X-154.24988 Y-19.35673
+G01 X-154.29161 Y-19.41452
+G01 X-154.36281 Y-19.53786
+G01 X-154.40665 Y-19.64085
+G01 X-154.44167 Y-19.75782
+G01 X-154.46288 Y-19.87807
+G01 X-154.46997 Y-19.99999
+G01 X-154.46995 Y-43.70507
+G00 Z0.00000
+G01 X-154.46994 Y-46.30507
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-154.46992 Y-70.01015
+G01 X-154.45889 Y-70.15216
+G01 X-154.42874 Y-70.29135
+G01 X-154.40665 Y-70.35909
+G01 X-154.37586 Y-70.43448
+G01 X-154.30825 Y-70.55983
+G01 X-154.22433 Y-70.67489
+G01 X-154.12557 Y-70.77756
+G01 X-154.06321 Y-70.82988
+G01 X-154.00543 Y-70.87161
+G01 X-153.88209 Y-70.94281
+G01 X-153.77909 Y-70.98665
+G01 X-153.66212 Y-71.02168
+G01 X-153.54188 Y-71.04289
+G01 X-153.41998 Y-71.04997
+G01 X-104.71489 Y-71.04995
+G00 Z0.00000
+G01 X-102.11489 Y-71.04995
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-53.40980 Y-71.04992
+G01 X-53.30820 Y-71.04400
+G01 X-53.20764 Y-71.02828
+G01 X-53.10908 Y-71.00291
+G01 X-53.01345 Y-70.96808
+G01 X-52.92163 Y-70.92419
+G01 X-52.83451 Y-70.87161
+G01 X-52.75288 Y-70.81083
+G01 X-52.67751 Y-70.74243
+G01 X-52.60911 Y-70.66707
+G01 X-52.54833 Y-70.58543
+G01 X-52.49575 Y-70.49831
+G01 X-52.44795 Y-70.39709
+G01 X-52.41409 Y-70.30113
+G01 X-52.38966 Y-70.20232
+G01 X-52.37490 Y-70.10164
+G01 X-52.36997 Y-69.99999
+
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z35.000000 ( retract )
+
+M5 ( Spindle off. )
+G04 P1.000000
+M9 ( Coolant off. )
+M2 ( Program end. )
+