( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S24000 ( RPM spindle speed. )
G01 F600.00000 ( Feedrate. )


G00 Z35.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to mill diameter 0.05000mm)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X49.62553 Y-43.12397 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X49.62553 Y-43.12397
G01 X49.62553 Y-42.87599
G01 X49.58671 Y-42.63106
G01 X49.51008 Y-42.39519
G01 X49.39751 Y-42.17421
G01 X49.25177 Y-41.97363
G01 X49.07638 Y-41.79824
G01 X48.87577 Y-41.65247
G01 X48.65481 Y-41.53992
G01 X48.41898 Y-41.46329
G01 X48.17402 Y-41.42448
G01 X47.92606 Y-41.42448
G01 X47.68111 Y-41.46329
G01 X47.44527 Y-41.53992
G01 X47.29261 Y-41.61765
G01 X47.22431 Y-41.65247
G01 X47.02370 Y-41.79824
G01 X46.84829 Y-41.97360
G01 X46.70252 Y-42.17421
G01 X46.58997 Y-42.39519
G01 X46.51334 Y-42.63106
G01 X46.47453 Y-42.87599
G01 X46.47453 Y-43.12397
G01 X46.51334 Y-43.36890
G01 X46.58997 Y-43.60476
G01 X46.70252 Y-43.82572
G01 X46.84829 Y-44.02633
G01 X47.02365 Y-44.20171
G01 X47.22431 Y-44.34746
G01 X47.44527 Y-44.46003
G01 X47.68111 Y-44.53666
G01 X47.92606 Y-44.57548
G01 X48.17402 Y-44.57548
G01 X48.41898 Y-44.53666
G01 X48.65481 Y-44.46003
G01 X48.74831 Y-44.41243
G01 X48.87577 Y-44.34746
G01 X49.07638 Y-44.20171
G01 X49.25177 Y-44.02633
G01 X49.39751 Y-43.82572
G01 X49.43236 Y-43.75739
G01 X49.51008 Y-43.60476
G01 X49.58671 Y-43.36890
G01 X49.62553 Y-43.12397
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X44.55271 Y-45.28152 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X44.55271 Y-45.28152
G01 X44.55271 Y-45.07682
G01 X44.52069 Y-44.87464
G01 X44.45744 Y-44.67995
G01 X44.36453 Y-44.49755
G01 X44.24421 Y-44.33197
G01 X44.09943 Y-44.18721
G01 X43.93384 Y-44.06687
G01 X43.75145 Y-43.97395
G01 X43.55676 Y-43.91071
G01 X43.35457 Y-43.87868
G01 X43.14987 Y-43.87868
G01 X42.94769 Y-43.91071
G01 X42.75300 Y-43.97395
G01 X42.57060 Y-44.06687
G01 X42.40502 Y-44.18721
G01 X42.26026 Y-44.33197
G01 X42.14083 Y-44.49633
G01 X42.04698 Y-44.67997
G01 X41.98376 Y-44.87464
G01 X41.95173 Y-45.07682
G01 X41.95173 Y-45.28152
G01 X41.96306 Y-45.35307
G01 X41.98376 Y-45.48370
G01 X42.04700 Y-45.67839
G01 X42.13992 Y-45.86079
G01 X42.26026 Y-46.02637
G01 X42.40502 Y-46.17115
G01 X42.57060 Y-46.29147
G01 X42.75300 Y-46.38439
G01 X42.94769 Y-46.44763
G01 X43.14987 Y-46.47966
G01 X43.35457 Y-46.47966
G01 X43.55676 Y-46.44763
G01 X43.75145 Y-46.38439
G01 X43.93384 Y-46.29147
G01 X44.09943 Y-46.17115
G01 X44.24421 Y-46.02637
G01 X44.36453 Y-45.86079
G01 X44.45744 Y-45.67839
G01 X44.52069 Y-45.48370
G01 X44.55271 Y-45.28152
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X33.77501 Y-49.18748 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X33.77501 Y-49.18748
G01 X33.77501 Y-48.81227
G01 X33.76023 Y-48.69985
G01 X33.70229 Y-48.56000
G01 X33.61014 Y-48.43986
G01 X33.49000 Y-48.34771
G01 X33.35012 Y-48.28977
G01 X33.32503 Y-48.28647
G01 X33.32503 Y-49.18748
G01 X33.77501 Y-49.18748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X32.87501 Y-49.18748 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X32.87501 Y-49.18748
G01 X32.87501 Y-48.28647
G01 X32.84921 Y-48.28987
G01 X32.79437 Y-48.30641
G01 X32.72490 Y-48.29894
G01 X32.70013 Y-48.28977
G01 X32.67504 Y-48.28647
G01 X32.67504 Y-49.18748
G01 X32.87501 Y-49.18748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X32.22503 Y-48.28647 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X32.22503 Y-48.28647
G01 X32.22500 Y-49.18748
G01 X32.02503 Y-49.18748
G01 X32.02503 Y-48.28647
G01 X32.05012 Y-48.28977
G01 X32.07489 Y-48.29894
G01 X32.14436 Y-48.30641
G01 X32.19920 Y-48.28987
G01 X32.22503 Y-48.28647
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X31.57502 Y-49.18748 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X31.57502 Y-49.18748
G01 X31.57502 Y-48.28647
G01 X31.54995 Y-48.28977
G01 X31.41004 Y-48.34771
G01 X31.28993 Y-48.43986
G01 X31.19775 Y-48.56000
G01 X31.13981 Y-48.69985
G01 X31.12503 Y-48.81230
G01 X31.12503 Y-49.18748
G01 X31.57502 Y-49.18748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X29.87502 Y-48.49868 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X29.87502 Y-48.49868
G01 X29.87502 Y-48.31248
G01 X29.42498 Y-48.31248
G01 X29.42480 Y-48.46020
G01 X29.40977 Y-48.54006
G01 X29.39168 Y-48.58108
G01 X29.36717 Y-48.61860
G01 X29.33649 Y-48.65195
G01 X29.29605 Y-48.68288
G01 X29.22989 Y-48.71296
G01 X29.16534 Y-48.72452
G01 X28.77502 Y-48.72495
G01 X28.77502 Y-49.17496
G01 X29.19872 Y-49.17496
G01 X29.29745 Y-49.16487
G01 X29.45851 Y-49.11151
G01 X29.60276 Y-49.02253
G01 X29.72259 Y-48.90272
G01 X29.81157 Y-48.75847
G01 X29.86494 Y-48.59741
G01 X29.87502 Y-48.49868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X29.87502 Y-47.76246 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X29.87502 Y-47.76246
G01 X29.87502 Y-47.57628
G01 X29.86494 Y-47.47755
G01 X29.81157 Y-47.31649
G01 X29.72259 Y-47.17224
G01 X29.60276 Y-47.05241
G01 X29.45851 Y-46.96343
G01 X29.29745 Y-46.91007
G01 X29.19872 Y-46.89998
G01 X28.77502 Y-46.89998
G01 X28.77502 Y-47.35002
G01 X29.16534 Y-47.35045
G01 X29.22989 Y-47.36201
G01 X29.29605 Y-47.39211
G01 X29.33649 Y-47.42302
G01 X29.36717 Y-47.45637
G01 X29.39168 Y-47.49391
G01 X29.40977 Y-47.53491
G01 X29.42480 Y-47.61476
G01 X29.42498 Y-47.76246
G01 X29.87502 Y-47.76246
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X28.22501 Y-47.35002 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X28.22501 Y-47.35002
G01 X27.83469 Y-47.35045
G01 X27.77015 Y-47.36201
G01 X27.70439 Y-47.39180
G01 X27.66845 Y-47.41855
G01 X27.63731 Y-47.45081
G01 X27.61163 Y-47.48814
G01 X27.59047 Y-47.53445
G01 X27.57523 Y-47.61476
G01 X27.57505 Y-47.76246
G01 X27.12504 Y-47.76246
G01 X27.12504 Y-47.57628
G01 X27.13512 Y-47.47755
G01 X27.18849 Y-47.31649
G01 X27.27746 Y-47.17224
G01 X27.39730 Y-47.05241
G01 X27.54155 Y-46.96343
G01 X27.70261 Y-46.91007
G01 X27.80131 Y-46.89998
G01 X28.22501 Y-46.89998
G01 X28.22501 Y-47.35002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X28.22501 Y-49.17496 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X28.22501 Y-49.17496
G01 X27.80134 Y-49.17496
G01 X27.70261 Y-49.16487
G01 X27.54155 Y-49.11151
G01 X27.39730 Y-49.02253
G01 X27.27746 Y-48.90272
G01 X27.18849 Y-48.75847
G01 X27.13512 Y-48.59741
G01 X27.12504 Y-48.49868
G01 X27.12504 Y-48.31248
G01 X27.57505 Y-48.31248
G01 X27.57523 Y-48.46020
G01 X27.59047 Y-48.54054
G01 X27.61163 Y-48.58685
G01 X27.63731 Y-48.62419
G01 X27.66845 Y-48.65642
G01 X27.70439 Y-48.68319
G01 X27.77015 Y-48.71296
G01 X27.83469 Y-48.72452
G01 X28.22501 Y-48.72495
G01 X28.22501 Y-49.17496
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X29.92501 Y-55.89996 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X29.92501 Y-55.89996
G01 X29.92501 Y-55.71378
G01 X29.91492 Y-55.61505
G01 X29.86156 Y-55.45399
G01 X29.77258 Y-55.30974
G01 X29.65277 Y-55.18991
G01 X29.50852 Y-55.10093
G01 X29.34746 Y-55.04757
G01 X29.24873 Y-55.03748
G01 X28.82503 Y-55.03748
G01 X28.82503 Y-55.48752
G01 X29.21533 Y-55.48795
G01 X29.28571 Y-55.50136
G01 X29.34563 Y-55.52930
G01 X29.38157 Y-55.55605
G01 X29.41299 Y-55.58871
G01 X29.44139 Y-55.63098
G01 X29.45975 Y-55.67241
G01 X29.47482 Y-55.75226
G01 X29.47500 Y-55.89996
G01 X29.92501 Y-55.89996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X29.92501 Y-56.63618 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X29.92501 Y-56.63618
G01 X29.92501 Y-56.44998
G01 X29.47500 Y-56.44998
G01 X29.47482 Y-56.59770
G01 X29.45955 Y-56.67804
G01 X29.43839 Y-56.72435
G01 X29.41271 Y-56.76168
G01 X29.38157 Y-56.79392
G01 X29.34563 Y-56.82069
G01 X29.27990 Y-56.85046
G01 X29.21533 Y-56.86201
G01 X28.82503 Y-56.86245
G01 X28.82503 Y-57.31246
G01 X29.24873 Y-57.31246
G01 X29.34746 Y-57.30237
G01 X29.50852 Y-57.24901
G01 X29.65277 Y-57.16003
G01 X29.77258 Y-57.04022
G01 X29.86156 Y-56.89597
G01 X29.91492 Y-56.73491
G01 X29.92501 Y-56.63618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X45.00903 Y-74.79650 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X45.00903 Y-74.79650
G01 X45.00311 Y-74.85154
G01 X44.95523 Y-74.97996
G01 X44.87334 Y-75.08928
G01 X44.76402 Y-75.17117
G01 X44.63559 Y-75.21905
G01 X44.58053 Y-75.22497
G01 X43.95904 Y-75.22497
G01 X43.95904 Y-74.77498
G01 X44.53402 Y-74.77498
G01 X44.54791 Y-74.77077
G01 X44.55480 Y-74.76388
G01 X44.55901 Y-74.74999
G01 X44.55901 Y-74.17499
G01 X45.00903 Y-74.17499
G01 X45.00903 Y-74.79650
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X43.40903 Y-75.22497 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X43.40903 Y-75.22497
G01 X42.78754 Y-75.22497
G01 X42.73245 Y-75.21905
G01 X42.60405 Y-75.17117
G01 X42.49470 Y-75.08928
G01 X42.41284 Y-74.97996
G01 X42.36496 Y-74.85154
G01 X42.35904 Y-74.79650
G01 X42.35904 Y-74.17499
G01 X42.80900 Y-74.17499
G01 X42.80900 Y-74.74999
G01 X42.81322 Y-74.76388
G01 X42.82013 Y-74.77077
G01 X42.83402 Y-74.77498
G01 X43.40903 Y-74.77498
G01 X43.40903 Y-75.22497
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X49.62553 Y-87.12396 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X49.62553 Y-87.12396
G01 X49.62553 Y-86.87598
G01 X49.58671 Y-86.63104
G01 X49.51008 Y-86.39518
G01 X49.39751 Y-86.17422
G01 X49.25177 Y-85.97362
G01 X49.07638 Y-85.79825
G01 X48.87577 Y-85.65248
G01 X48.65481 Y-85.53991
G01 X48.41898 Y-85.46328
G01 X48.17402 Y-85.42449
G01 X47.92606 Y-85.42449
G01 X47.68111 Y-85.46328
G01 X47.44527 Y-85.53991
G01 X47.22431 Y-85.65248
G01 X47.02370 Y-85.79823
G01 X46.84829 Y-85.97362
G01 X46.70252 Y-86.17422
G01 X46.58997 Y-86.39518
G01 X46.51334 Y-86.63104
G01 X46.47453 Y-86.87598
G01 X46.47453 Y-87.12396
G01 X46.51334 Y-87.36891
G01 X46.58997 Y-87.60478
G01 X46.70252 Y-87.82573
G01 X46.84829 Y-88.02634
G01 X47.02365 Y-88.20170
G01 X47.22431 Y-88.34747
G01 X47.44527 Y-88.46005
G01 X47.68111 Y-88.53668
G01 X47.92606 Y-88.57546
G01 X48.17402 Y-88.57546
G01 X48.41898 Y-88.53668
G01 X48.65481 Y-88.46005
G01 X48.87577 Y-88.34747
G01 X49.07638 Y-88.20170
G01 X49.25177 Y-88.02634
G01 X49.39751 Y-87.82573
G01 X49.51008 Y-87.60478
G01 X49.58671 Y-87.36891
G01 X49.62553 Y-87.12396
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X53.05001 Y-90.95097 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X53.05001 Y-90.95097
G01 X53.05001 Y-90.44239
G01 X53.04487 Y-90.33861
G01 X53.02948 Y-90.23589
G01 X53.00403 Y-90.13518
G01 X52.96872 Y-90.03746
G01 X52.92394 Y-89.94374
G01 X52.87010 Y-89.85491
G01 X52.80774 Y-89.77183
G01 X52.73746 Y-89.69532
G01 X52.65996 Y-89.62616
G01 X52.57599 Y-89.56500
G01 X52.48640 Y-89.51242
G01 X52.39204 Y-89.46899
G01 X52.29385 Y-89.43508
G01 X52.19278 Y-89.41105
G01 X52.08986 Y-89.39713
G01 X51.98602 Y-89.39347
G01 X51.88237 Y-89.40010
G01 X51.77985 Y-89.41694
G01 X51.67952 Y-89.44384
G01 X51.58234 Y-89.48054
G01 X51.48928 Y-89.52667
G01 X51.40121 Y-89.58176
G01 X51.31902 Y-89.64531
G01 X51.24353 Y-89.71666
G01 X51.17548 Y-89.79515
G01 X51.11552 Y-89.87996
G01 X51.04975 Y-89.99969
G01 X50.92999 Y-90.06548
G01 X50.84518 Y-90.12545
G01 X50.76670 Y-90.19352
G01 X50.69532 Y-90.26901
G01 X50.63180 Y-90.35118
G01 X50.57668 Y-90.43924
G01 X50.53055 Y-90.53231
G01 X50.49388 Y-90.62951
G01 X50.46698 Y-90.72984
G01 X50.45014 Y-90.83233
G01 X50.44351 Y-90.93601
G01 X50.44717 Y-91.03982
G01 X50.46108 Y-91.14277
G01 X50.48509 Y-91.24384
G01 X50.51900 Y-91.34201
G01 X50.56246 Y-91.43637
G01 X50.61501 Y-91.52598
G01 X50.67620 Y-91.60993
G01 X50.74536 Y-91.68742
G01 X50.82187 Y-91.75770
G01 X50.90495 Y-91.82006
G01 X50.99377 Y-91.87391
G01 X51.08750 Y-91.91869
G01 X51.18519 Y-91.95399
G01 X51.28590 Y-91.97947
G01 X51.38864 Y-91.99484
G01 X51.49240 Y-91.99999
G01 X52.00101 Y-91.99999
G01 X52.10383 Y-91.99494
G01 X52.20566 Y-91.97983
G01 X52.30553 Y-91.95481
G01 X52.40246 Y-91.92014
G01 X52.49550 Y-91.87612
G01 X52.58381 Y-91.82321
G01 X52.66649 Y-91.76187
G01 X52.74277 Y-91.69273
G01 X52.81191 Y-91.61645
G01 X52.87322 Y-91.53378
G01 X52.92615 Y-91.44549
G01 X52.97017 Y-91.35242
G01 X53.00484 Y-91.25549
G01 X53.02986 Y-91.15565
G01 X53.04495 Y-91.05382
G01 X53.05001 Y-90.95097
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X44.47651 Y-84.94974 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X44.47651 Y-84.94974
G01 X44.44448 Y-85.15190
G01 X44.38124 Y-85.34662
G01 X44.28833 Y-85.52899
G01 X44.16801 Y-85.69460
G01 X44.02323 Y-85.83935
G01 X43.85764 Y-85.95967
G01 X43.67525 Y-86.05258
G01 X43.57075 Y-86.08654
G01 X43.48055 Y-86.11583
G01 X43.27837 Y-86.14786
G01 X43.07367 Y-86.14786
G01 X42.87149 Y-86.11583
G01 X42.67680 Y-86.05258
G01 X42.49440 Y-85.95967
G01 X42.32882 Y-85.83935
G01 X42.18406 Y-85.69460
G01 X42.06372 Y-85.52899
G01 X41.97080 Y-85.34659
G01 X41.90756 Y-85.15190
G01 X41.87553 Y-84.94974
G01 X41.87553 Y-84.74502
G01 X41.90756 Y-84.54283
G01 X41.97080 Y-84.34814
G01 X42.06374 Y-84.16574
G01 X42.18406 Y-84.00016
G01 X42.32882 Y-83.85541
G01 X42.49440 Y-83.73509
G01 X42.67680 Y-83.64217
G01 X42.87149 Y-83.57890
G01 X43.07367 Y-83.54687
G01 X43.27837 Y-83.54687
G01 X43.48055 Y-83.57890
G01 X43.67525 Y-83.64217
G01 X43.85764 Y-83.73509
G01 X44.02323 Y-83.85541
G01 X44.16801 Y-84.00016
G01 X44.28833 Y-84.16574
G01 X44.38124 Y-84.34814
G01 X44.44448 Y-84.54283
G01 X44.47651 Y-84.74502
G01 X44.47651 Y-84.94974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X38.57490 Y-85.01964 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X38.57490 Y-85.01964
G01 X38.29410 Y-85.07580
G01 X38.29410 Y-85.06742
G01 X38.31559 Y-85.02444
G01 X38.35857 Y-85.00295
G01 X38.54150 Y-85.00295
G01 X38.57490 Y-85.01964
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X37.08336 Y-84.03567 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X37.08336 Y-84.03567
G01 X37.00505 Y-84.00433
G01 X36.94483 Y-83.98515
G01 X36.85789 Y-83.96536
G01 X36.75649 Y-83.95449
G01 X36.70470 Y-83.95360
G01 X36.61720 Y-83.95965
G01 X36.56538 Y-83.96768
G01 X36.47031 Y-83.99102
G01 X36.41852 Y-84.00842
G01 X36.30523 Y-84.05805
G01 X36.25344 Y-84.08604
G01 X36.07727 Y-84.20638
G01 X35.95702 Y-84.19117
G01 X35.86091 Y-84.18634
G01 X35.60160 Y-84.18739
G01 X35.47338 Y-84.19866
G01 X35.31613 Y-84.22955
G01 X35.25621 Y-84.21560
G01 X35.13559 Y-84.19579
G01 X34.99083 Y-84.18634
G01 X34.82695 Y-84.18685
G01 X34.71684 Y-84.19341
G01 X34.56262 Y-84.18688
G01 X34.41369 Y-84.19813
G01 X34.28301 Y-84.10765
G01 X34.23122 Y-84.07738
G01 X34.11273 Y-84.02051
G01 X34.06094 Y-84.00110
G01 X33.96317 Y-83.97349
G01 X33.91136 Y-83.96364
G01 X33.82314 Y-83.95449
G01 X33.77135 Y-83.95360
G01 X33.68385 Y-83.95965
G01 X33.63204 Y-83.96768
G01 X33.54689 Y-83.98777
G01 X33.41850 Y-84.03539
G01 X33.27240 Y-84.11431
G01 X33.14209 Y-84.20616
G01 X32.96465 Y-84.18736
G01 X32.69363 Y-84.18685
G01 X32.61471 Y-84.19028
G01 X32.47926 Y-84.18703
G01 X32.34753 Y-84.19767
G01 X32.22612 Y-84.21977
G01 X32.09325 Y-84.25632
G01 X31.88360 Y-84.20804
G01 X31.72866 Y-84.18888
G01 X31.42699 Y-84.18685
G01 X31.24101 Y-84.20423
G01 X31.16465 Y-84.16064
G01 X31.04040 Y-84.10009
G01 X30.87951 Y-84.03636
G01 X30.75589 Y-84.00336
G01 X30.49392 Y-83.96074
G01 X30.40776 Y-83.95343
G01 X30.21640 Y-83.95426
G01 X30.13910 Y-83.96079
G01 X29.89864 Y-83.99932
G01 X29.81655 Y-84.01746
G01 X29.68609 Y-84.06155
G01 X29.49750 Y-84.13966
G01 X29.40019 Y-84.18525
G01 X29.29725 Y-84.24261
G01 X29.11627 Y-84.35538
G01 X29.02102 Y-84.41952
G01 X29.02605 Y-84.47372
G01 X29.03182 Y-84.68817
G01 X29.01058 Y-84.96211
G01 X28.98241 Y-85.18088
G01 X28.97009 Y-85.34410
G01 X28.96496 Y-85.67087
G01 X28.96832 Y-85.80361
G01 X28.87581 Y-85.93933
G01 X28.71320 Y-86.22068
G01 X28.19148 Y-86.47140
G01 X28.06796 Y-86.45449
G01 X27.71554 Y-86.39195
G01 X27.67124 Y-86.40011
G01 X27.51053 Y-86.41705
G01 X27.33113 Y-86.42347
G01 X26.98673 Y-86.11347
G01 X26.79082 Y-86.13463
G01 X26.70040 Y-86.15106
G01 X26.61351 Y-86.17262
G01 X26.39123 Y-86.23590
G01 X26.29159 Y-86.27547
G01 X26.21617 Y-86.31293
G01 X25.99883 Y-86.18593
G01 X25.93695 Y-86.15495
G01 X25.86093 Y-86.12350
G01 X25.83375 Y-85.89533
G01 X25.79327 Y-85.72978
G01 X25.75237 Y-85.63064
G01 X25.65003 Y-85.45304
G01 X25.65044 Y-85.07148
G01 X25.65450 Y-85.01743
G01 X25.66863 Y-84.93313
G01 X25.70901 Y-84.76445
G01 X25.73246 Y-84.69114
G01 X25.78194 Y-84.56755
G01 X25.82303 Y-84.47931
G01 X25.90591 Y-84.33760
G01 X25.97079 Y-84.21672
G01 X25.90591 Y-84.33760
G01 X25.82303 Y-84.47931
G01 X25.78194 Y-84.56755
G01 X25.73246 Y-84.69114
G01 X25.70901 Y-84.76445
G01 X25.66863 Y-84.93313
G01 X25.65450 Y-85.01743
G01 X25.65044 Y-85.07148
G01 X25.65003 Y-85.45304
G01 X25.75237 Y-85.63064
G01 X25.79327 Y-85.72978
G01 X25.83375 Y-85.89533
G01 X25.86093 Y-86.12350
G01 X25.26578 Y-86.28611
G01 X25.17505 Y-86.31408
G01 X25.05189 Y-86.35802
G01 X24.78943 Y-86.46251
G01 X24.68039 Y-86.66569
G01 X24.52822 Y-86.90889
G01 X24.52822 Y-87.60303
G01 X24.93797 Y-88.01278
G01 X25.03373 Y-88.10234
G01 X25.15697 Y-88.20142
G01 X25.19847 Y-88.23074
G01 X25.35067 Y-88.32002
G01 X25.46169 Y-88.36734
G01 X25.57320 Y-88.39909
G01 X25.63695 Y-88.41069
G01 X25.72928 Y-88.41811
G01 X25.86311 Y-88.41069
G01 X25.96837 Y-88.38898
G01 X26.03837 Y-88.36734
G01 X26.14940 Y-88.32002
G01 X26.21704 Y-88.28438
G01 X26.31051 Y-88.33261
G01 X26.43548 Y-88.38047
G01 X26.55120 Y-88.40760
G01 X26.66263 Y-88.41811
G01 X26.77404 Y-88.41331
G01 X26.88978 Y-88.39210
G01 X26.93129 Y-88.38047
G01 X27.05242 Y-88.33429
G01 X27.13103 Y-88.35807
G01 X27.29100 Y-88.39604
G01 X27.34907 Y-88.40747
G01 X27.43121 Y-88.41689
G01 X27.97076 Y-88.41811
G01 X28.03192 Y-88.41443
G01 X28.14871 Y-88.39424
G01 X28.28335 Y-88.35037
G01 X28.38020 Y-88.38387
G01 X28.45623 Y-88.40249
G01 X28.55940 Y-88.41654
G01 X28.64279 Y-88.41816
G01 X28.77718 Y-88.40249
G01 X28.89471 Y-88.37071
G01 X29.00136 Y-88.32738
G01 X29.10360 Y-88.27191
G01 X29.20250 Y-88.31641
G01 X29.34322 Y-88.36114
G01 X29.55523 Y-88.40828
G01 X29.66102 Y-88.41814
G01 X29.87398 Y-88.41654
G01 X29.95787 Y-88.40627
G01 X30.05043 Y-88.38499
G01 X30.18386 Y-88.41202
G01 X30.26265 Y-88.41811
G01 X30.36526 Y-88.41443
G01 X30.48205 Y-88.39424
G01 X30.61678 Y-88.35032
G01 X30.73171 Y-88.38898
G01 X30.86816 Y-88.41443
G01 X30.97078 Y-88.41811
G01 X31.06313 Y-88.41069
G01 X31.14873 Y-88.39424
G01 X31.25005 Y-88.36330
G01 X31.31355 Y-88.38387
G01 X31.43107 Y-88.40965
G01 X31.49275 Y-88.41654
G01 X31.57613 Y-88.41816
G01 X31.66902 Y-88.40965
G01 X31.78655 Y-88.38387
G01 X31.91492 Y-88.33627
G01 X31.95642 Y-88.31651
G01 X32.10255 Y-88.23010
G01 X32.23628 Y-88.12792
G01 X32.35002 Y-88.02474
G01 X32.35711 Y-87.87054
G01 X32.39295 Y-87.64481
G01 X32.40547 Y-87.59373
G01 X32.48995 Y-87.34389
G01 X32.34507 Y-86.89294
G01 X32.30781 Y-86.76168
G01 X32.28500 Y-86.66424
G01 X32.08436 Y-86.51497
G01 X31.77405 Y-86.47646
G01 X31.53300 Y-86.43206
G01 X31.26717 Y-86.40646
G01 X31.14817 Y-86.38515
G01 X31.04847 Y-86.36478
G01 X31.00209 Y-86.35101
G01 X30.94987 Y-86.30006
G01 X30.62701 Y-86.22510
G01 X30.42965 Y-86.19653
G01 X30.26781 Y-86.18525
G01 X30.08393 Y-86.19292
G01 X30.01787 Y-86.19919
G01 X29.88396 Y-86.22469
G01 X29.63801 Y-86.07367
G01 X29.52879 Y-86.01672
G01 X29.23819 Y-85.89635
G01 X29.06250 Y-85.83285
G01 X28.96832 Y-85.80361
G01 X28.96496 Y-85.67087
G01 X28.97009 Y-85.34410
G01 X28.98241 Y-85.18088
G01 X29.01058 Y-84.96211
G01 X29.03182 Y-84.68817
G01 X29.02605 Y-84.47372
G01 X29.02102 Y-84.41952
G01 X28.82930 Y-84.31807
G01 X28.65107 Y-84.24941
G01 X28.51190 Y-84.21329
G01 X28.37794 Y-84.19287
G01 X28.24729 Y-84.18647
G01 X28.11528 Y-84.19358
G01 X27.98079 Y-84.21484
G01 X27.83916 Y-84.25254
G01 X27.71602 Y-84.29780
G01 X27.57734 Y-84.24720
G01 X27.43832 Y-84.21190
G01 X27.24665 Y-84.18827
G01 X27.09931 Y-84.18924
G01 X26.98059 Y-84.20280
G01 X26.81907 Y-84.23834
G01 X26.73121 Y-84.21761
G01 X26.59720 Y-84.19516
G01 X26.46088 Y-84.18634
G01 X26.17139 Y-84.18888
G01 X26.07338 Y-84.19866
G01 X25.97079 Y-84.21672
G01 X25.84478 Y-84.12495
G01 X25.70421 Y-84.04563
G01 X25.63622 Y-84.01599
G01 X25.54483 Y-83.98515
G01 X25.42669 Y-83.96054
G01 X25.30470 Y-83.95360
G01 X25.21719 Y-83.95965
G01 X25.16538 Y-83.96768
G01 X25.05004 Y-83.99783
G01 X24.93469 Y-83.96768
G01 X24.80462 Y-83.95355
G01 X24.11722 Y-83.95284
G01 X24.02156 Y-83.95912
G01 X23.93988 Y-83.97255
G01 X23.82837 Y-84.00433
G01 X23.78164 Y-84.02206
G01 X23.74641 Y-84.12292
G01 X23.72951 Y-84.18949
G01 X23.71626 Y-84.27390
G01 X23.71171 Y-84.34845
G01 X23.71171 Y-85.76927
G01 X23.72159 Y-85.88182
G01 X23.73564 Y-85.95533
G01 X23.76292 Y-86.04656
G01 X23.81961 Y-86.17666
G01 X23.88331 Y-86.28583
G01 X23.97391 Y-86.41029
G01 X24.07488 Y-86.52558
G01 X24.10498 Y-86.55675
G01 X24.33457 Y-86.76178
G01 X24.52822 Y-86.90889
G01 X24.68039 Y-86.66569
G01 X24.78943 Y-86.46251
G01 X24.76172 Y-85.96597
G01 X24.72535 Y-85.69851
G01 X24.71796 Y-85.61128
G01 X24.81976 Y-85.46231
G01 X24.87173 Y-85.36473
G01 X24.88974 Y-85.32320
G01 X24.92690 Y-85.21017
G01 X24.94724 Y-85.08759
G01 X24.94973 Y-85.01385
G01 X24.94706 Y-84.96206
G01 X24.93652 Y-84.88627
G01 X24.90114 Y-84.75805
G01 X24.95948 Y-84.66887
G01 X24.99286 Y-84.60496
G01 X25.01430 Y-84.55320
G01 X25.04145 Y-84.45292
G01 X25.05004 Y-84.34855
G01 X25.05004 Y-83.99783
G01 X25.16538 Y-83.96768
G01 X25.21719 Y-83.95965
G01 X25.30470 Y-83.95360
G01 X25.42669 Y-83.96054
G01 X25.51364 Y-83.97697
G01 X25.63622 Y-84.01599
G01 X25.73538 Y-84.06112
G01 X25.84478 Y-84.12495
G01 X25.97079 Y-84.21672
G01 X26.07338 Y-84.19866
G01 X26.17139 Y-84.18888
G01 X26.46088 Y-84.18634
G01 X26.59720 Y-84.19516
G01 X26.73121 Y-84.21761
G01 X26.81907 Y-84.23834
G01 X26.83527 Y-84.43178
G01 X26.85709 Y-84.63237
G01 X26.86735 Y-84.69310
G01 X26.90408 Y-84.84436
G01 X26.95808 Y-84.99175
G01 X26.97932 Y-85.07179
G01 X27.04013 Y-85.50189
G01 X27.04475 Y-85.59541
G01 X27.04302 Y-85.64408
G01 X27.02626 Y-85.82459
G01 X27.00017 Y-85.99373
G01 X26.98673 Y-86.11347
G01 X27.33113 Y-86.42347
G01 X27.14447 Y-86.73338
G01 X27.09903 Y-86.81593
G01 X27.07195 Y-86.87539
G01 X27.04366 Y-86.95807
G01 X27.02052 Y-87.07679
G01 X27.01691 Y-87.14544
G01 X27.02036 Y-87.21382
G01 X27.03106 Y-87.28329
G01 X27.04731 Y-87.34562
G01 X26.99380 Y-87.57128
G01 X26.98671 Y-87.61956
G01 X26.98338 Y-87.67948
G01 X26.98526 Y-87.85781
G01 X26.99278 Y-87.91781
G01 X27.01396 Y-88.01280
G01 X27.02791 Y-88.09843
G01 X27.05242 Y-88.33429
G01 X27.13103 Y-88.35807
G01 X27.31881 Y-88.40191
G01 X27.43121 Y-88.41689
G01 X27.97076 Y-88.41811
G01 X28.03192 Y-88.41443
G01 X28.11754 Y-88.40127
G01 X28.20715 Y-88.37783
G01 X28.28335 Y-88.35037
G01 X28.28318 Y-87.26929
G01 X28.27490 Y-87.17702
G01 X28.24751 Y-87.04204
G01 X28.23728 Y-86.96978
G01 X28.19148 Y-86.47140
G01 X28.71320 Y-86.22068
G01 X28.87581 Y-85.93933
G01 X28.96832 Y-85.80361
G01 X29.06250 Y-85.83285
G01 X29.23819 Y-85.89635
G01 X29.52879 Y-86.01672
G01 X29.63801 Y-86.07367
G01 X29.88396 Y-86.22469
G01 X29.87901 Y-86.33249
G01 X29.85079 Y-86.63876
G01 X29.85056 Y-86.71298
G01 X30.04919 Y-86.91522
G01 X30.11510 Y-86.91207
G01 X30.45991 Y-86.91308
G01 X30.53895 Y-86.91817
G01 X30.61726 Y-86.92888
G01 X30.53895 Y-86.91817
G01 X30.45991 Y-86.91308
G01 X30.11510 Y-86.91207
G01 X30.04919 Y-86.91522
G01 X30.04931 Y-87.09739
G01 X30.03941 Y-87.17732
G01 X30.03146 Y-87.20981
G01 X30.01408 Y-87.26162
G01 X29.97624 Y-87.34151
G01 X29.93123 Y-87.41250
G01 X29.88366 Y-87.47331
G01 X29.88376 Y-87.61819
G01 X29.94827 Y-87.70442
G01 X29.97913 Y-87.75568
G01 X30.02099 Y-87.84783
G01 X30.04309 Y-87.93094
G01 X30.05033 Y-88.01080
G01 X30.05043 Y-88.38499
G01 X30.18386 Y-88.41202
G01 X30.26265 Y-88.41811
G01 X30.36526 Y-88.41443
G01 X30.48205 Y-88.39424
G01 X30.61678 Y-88.35032
G01 X30.61726 Y-86.92888
G01 X31.00209 Y-86.35101
G01 X30.94987 Y-86.30006
G01 X30.94936 Y-85.73864
G01 X30.93915 Y-85.65436
G01 X30.89501 Y-85.47184
G01 X30.85190 Y-85.36249
G01 X30.79699 Y-85.26851
G01 X30.72749 Y-85.17656
G01 X30.61627 Y-85.05939
G01 X30.83486 Y-84.86308
G01 X30.90367 Y-84.78672
G01 X30.98198 Y-84.68497
G01 X31.03285 Y-84.61172
G01 X31.13186 Y-84.44352
G01 X31.17936 Y-84.34601
G01 X31.24101 Y-84.20423
G01 X31.42699 Y-84.18685
G01 X31.64710 Y-84.18619
G01 X31.72866 Y-84.18888
G01 X31.84337 Y-84.20130
G01 X31.96013 Y-84.22378
G01 X32.09325 Y-84.25632
G01 X32.13318 Y-84.63636
G01 X32.17032 Y-84.82561
G01 X32.20224 Y-84.96076
G01 X32.21456 Y-85.04768
G01 X32.21616 Y-85.51266
G01 X32.20527 Y-85.60712
G01 X32.16704 Y-85.76932
G01 X32.13610 Y-85.92563
G01 X32.12335 Y-86.01105
G01 X32.09904 Y-86.28014
G01 X32.08436 Y-86.51497
G01 X32.28500 Y-86.66424
G01 X32.30781 Y-86.76168
G01 X32.34507 Y-86.89294
G01 X32.48995 Y-87.34389
G01 X32.40547 Y-87.59373
G01 X32.39295 Y-87.64481
G01 X32.35711 Y-87.87054
G01 X32.35002 Y-88.02474
G01 X32.50704 Y-88.16289
G01 X32.65901 Y-88.26929
G01 X32.80412 Y-88.34483
G01 X32.89582 Y-88.37874
G01 X33.01357 Y-88.40709
G01 X33.13968 Y-88.41864
G01 X34.07400 Y-88.41654
G01 X34.17720 Y-88.40249
G01 X34.25322 Y-88.38387
G01 X34.29472 Y-88.37071
G01 X34.41357 Y-88.32106
G01 X34.54257 Y-88.36099
G01 X34.69162 Y-88.39619
G01 X34.76808 Y-88.41019
G01 X34.84857 Y-88.41730
G01 X35.01202 Y-88.41880
G01 X35.10917 Y-88.41288
G01 X35.18791 Y-88.40033
G01 X35.37663 Y-88.35581
G01 X35.44755 Y-88.33488
G01 X35.50150 Y-88.35733
G01 X35.59325 Y-88.38778
G01 X35.68024 Y-88.40709
G01 X35.76358 Y-88.41684
G01 X36.70945 Y-88.41816
G01 X36.84384 Y-88.40249
G01 X36.96137 Y-88.37071
G01 X37.05230 Y-88.33434
G01 X37.13284 Y-88.35852
G01 X37.30180 Y-88.39840
G01 X37.39548 Y-88.41364
G01 X37.46205 Y-88.41814
G01 X37.74884 Y-88.41882
G01 X37.80569 Y-88.41666
G01 X37.90559 Y-88.40348
G01 X38.11247 Y-88.35520
G01 X38.20891 Y-88.32431
G01 X38.33246 Y-88.27478
G01 X38.40853 Y-88.24008
G01 X38.53535 Y-88.17097
G01 X38.69453 Y-88.07237
G01 X38.86093 Y-87.95426
G01 X39.07399 Y-87.76625
G01 X39.30452 Y-87.53572
G01 X39.30452 Y-87.39264
G01 X39.28107 Y-87.06607
G01 X39.00284 Y-86.83363
G01 X38.98376 Y-86.80089
G01 X38.95415 Y-86.77595
G01 X38.58338 Y-86.47303
G01 X38.48074 Y-86.39602
G01 X38.33236 Y-86.30488
G01 X38.25103 Y-86.26234
G01 X38.04341 Y-86.15985
G01 X37.96680 Y-86.13084
G01 X37.80404 Y-86.17186
G01 X37.71554 Y-86.18344
G01 X37.62799 Y-86.18588
G01 X37.39822 Y-86.17735
G01 X37.26698 Y-86.17760
G01 X37.01610 Y-86.32911
G01 X36.75875 Y-86.22901
G01 X36.56599 Y-86.13943
G01 X36.38336 Y-86.06607
G01 X36.23503 Y-86.11791
G01 X35.71067 Y-86.25025
G01 X35.55004 Y-86.30135
G01 X35.07166 Y-86.04819
G01 X34.91105 Y-86.12314
G01 X34.67717 Y-86.20557
G01 X34.57379 Y-86.23468
G01 X34.35042 Y-86.27750
G01 X34.31702 Y-86.29901
G01 X33.63237 Y-86.12746
G01 X33.51598 Y-86.09244
G01 X33.40839 Y-86.13620
G01 X33.14900 Y-86.22459
G01 X33.08268 Y-86.24047
G01 X32.81583 Y-86.28758
G01 X32.28500 Y-86.66424
G01 X32.81583 Y-86.28758
G01 X33.08268 Y-86.24047
G01 X33.14900 Y-86.22459
G01 X33.40839 Y-86.13620
G01 X33.51598 Y-86.09244
G01 X33.49180 Y-85.83130
G01 X33.46328 Y-85.69015
G01 X33.45185 Y-85.60725
G01 X33.44946 Y-85.13140
G01 X33.42061 Y-85.08312
G01 X33.39101 Y-85.02246
G01 X33.33966 Y-84.90100
G01 X33.32127 Y-84.84629
G01 X33.30615 Y-84.77400
G01 X33.26142 Y-84.41477
G01 X33.14209 Y-84.20616
G01 X33.27240 Y-84.11431
G01 X33.41850 Y-84.03539
G01 X33.54689 Y-83.98777
G01 X33.63204 Y-83.96768
G01 X33.68385 Y-83.95965
G01 X33.77135 Y-83.95360
G01 X33.82314 Y-83.95449
G01 X33.91136 Y-83.96364
G01 X33.96317 Y-83.97349
G01 X34.06094 Y-84.00110
G01 X34.11273 Y-84.02051
G01 X34.23122 Y-84.07738
G01 X34.28301 Y-84.10765
G01 X34.41369 Y-84.19813
G01 X34.35004 Y-84.30534
G01 X34.35103 Y-84.78446
G01 X34.34740 Y-84.87156
G01 X34.33943 Y-84.92338
G01 X34.31408 Y-85.00770
G01 X34.27626 Y-85.08759
G01 X34.23122 Y-85.15855
G01 X34.18365 Y-85.21939
G01 X34.18375 Y-85.36422
G01 X34.25101 Y-85.45464
G01 X34.29477 Y-85.53089
G01 X34.33302 Y-85.63158
G01 X34.34661 Y-85.69919
G01 X34.35050 Y-85.75053
G01 X34.35042 Y-86.27750
G01 X34.31702 Y-86.29901
G01 X34.31585 Y-86.83445
G01 X34.29091 Y-87.04420
G01 X34.27186 Y-87.12749
G01 X34.23328 Y-87.35629
G01 X34.20874 Y-87.43599
G01 X34.16378 Y-87.55723
G01 X34.14880 Y-87.61153
G01 X34.20991 Y-87.68512
G01 X34.25896 Y-87.75857
G01 X34.29241 Y-87.82337
G01 X34.33389 Y-87.91941
G01 X34.35781 Y-87.99205
G01 X34.39706 Y-88.17640
G01 X34.41357 Y-88.32106
G01 X34.54257 Y-88.36099
G01 X34.69162 Y-88.39619
G01 X34.76808 Y-88.41019
G01 X34.84857 Y-88.41730
G01 X35.01202 Y-88.41880
G01 X35.10917 Y-88.41288
G01 X35.18791 Y-88.40033
G01 X35.37663 Y-88.35581
G01 X35.44755 Y-88.33488
G01 X35.45560 Y-88.25271
G01 X35.47298 Y-88.14280
G01 X35.50005 Y-88.02108
G01 X35.52299 Y-87.94384
G01 X35.57973 Y-87.82022
G01 X35.71989 Y-87.57194
G01 X35.75106 Y-87.51006
G01 X35.85789 Y-87.25332
G01 X35.78184 Y-87.16630
G01 X35.66358 Y-87.00419
G01 X35.63025 Y-86.94367
G01 X35.59490 Y-86.85436
G01 X35.57183 Y-86.76165
G01 X35.55454 Y-86.66178
G01 X35.54948 Y-86.53638
G01 X35.55004 Y-86.30135
G01 X35.07166 Y-86.04819
G01 X35.03325 Y-85.79970
G01 X34.99500 Y-85.62718
G01 X34.98398 Y-85.51702
G01 X34.98377 Y-85.22566
G01 X35.05469 Y-85.14705
G01 X35.10145 Y-85.08256
G01 X35.18311 Y-84.95739
G01 X35.22352 Y-84.86803
G01 X35.26226 Y-84.73234
G01 X35.27514 Y-84.65660
G01 X35.30325 Y-84.42924
G01 X35.31613 Y-84.22955
G01 X35.47338 Y-84.19866
G01 X35.60160 Y-84.18739
G01 X35.86091 Y-84.18634
G01 X35.95702 Y-84.19117
G01 X36.07727 Y-84.20638
G01 X36.15359 Y-84.34880
G01 X36.22174 Y-84.45891
G01 X36.27270 Y-84.55693
G01 X36.33294 Y-84.69996
G01 X36.35608 Y-84.76940
G01 X36.40556 Y-84.97715
G01 X36.41651 Y-85.07171
G01 X36.41717 Y-85.50194
G01 X36.40203 Y-85.66508
G01 X36.39995 Y-85.81144
G01 X36.38336 Y-86.06607
G01 X36.56599 Y-86.13943
G01 X36.75875 Y-86.22901
G01 X37.01610 Y-86.32911
G01 X37.26698 Y-86.17760
G01 X37.39822 Y-86.17735
G01 X37.62799 Y-86.18588
G01 X37.71554 Y-86.18344
G01 X37.80404 Y-86.17186
G01 X37.96680 Y-86.13084
G01 X37.92672 Y-85.80618
G01 X37.91133 Y-85.73432
G01 X37.84922 Y-85.57816
G01 X37.81806 Y-85.51271
G01 X37.78344 Y-85.45299
G01 X37.78372 Y-85.00496
G01 X37.78692 Y-84.95693
G01 X37.79926 Y-84.87854
G01 X37.83657 Y-84.71931
G01 X37.86693 Y-84.62155
G01 X37.90592 Y-84.53029
G01 X37.92865 Y-84.48680
G01 X38.01844 Y-84.33763
G01 X38.09131 Y-84.20666
G01 X38.26827 Y-84.18739
G01 X38.64787 Y-84.18833
G01 X38.80363 Y-84.20544
G01 X38.99006 Y-84.24667
G01 X39.03764 Y-84.73222
G01 X39.07940 Y-84.96087
G01 X39.08275 Y-85.00549
G01 X39.08272 Y-85.17981
G01 X39.07414 Y-85.26252
G01 X39.06322 Y-85.31238
G01 X39.04757 Y-85.36445
G01 X39.00853 Y-85.45728
G01 X39.02400 Y-85.50694
G01 X39.04152 Y-85.58609
G01 X39.04998 Y-85.69282
G01 X39.04142 Y-85.81555
G01 X38.99349 Y-86.31596
G01 X38.98341 Y-86.55875
G01 X38.98376 Y-86.80089
G01 X39.00284 Y-86.83363
G01 X39.28107 Y-87.06607
G01 X39.36723 Y-86.98324
G01 X39.60281 Y-86.72441
G01 X39.73695 Y-86.53849
G01 X39.84655 Y-86.34425
G01 X39.90909 Y-86.19635
G01 X39.95079 Y-86.05738
G01 X39.96250 Y-86.00559
G01 X39.98640 Y-85.82071
G01 X39.98851 Y-85.39442
G01 X40.05559 Y-85.28784
G01 X40.08356 Y-85.23605
G01 X40.13715 Y-85.11322
G01 X40.15625 Y-85.05317
G01 X40.17602 Y-84.96643
G01 X40.18785 Y-84.85137
G01 X40.18224 Y-84.73056
G01 X40.17101 Y-84.65843
G01 X40.13715 Y-84.53785
G01 X40.09727 Y-84.44169
G01 X40.05882 Y-84.36773
G01 X39.94320 Y-84.19727
G01 X39.79085 Y-84.18634
G01 X39.62694 Y-84.18685
G01 X39.51686 Y-84.19338
G01 X39.36263 Y-84.18688
G01 X39.21422 Y-84.19767
G01 X39.09281 Y-84.21977
G01 X38.99006 Y-84.24667
G01 X38.80363 Y-84.20544
G01 X38.64787 Y-84.18833
G01 X38.26827 Y-84.18739
G01 X38.09131 Y-84.20666
G01 X37.97810 Y-84.12495
G01 X37.83754 Y-84.04563
G01 X37.73838 Y-84.00433
G01 X37.67815 Y-83.98515
G01 X37.59121 Y-83.96536
G01 X37.48981 Y-83.95449
G01 X37.43802 Y-83.95360
G01 X37.35052 Y-83.95965
G01 X37.29870 Y-83.96768
G01 X37.20363 Y-83.99102
G01 X37.08336 Y-84.03567
G01 X37.08392 Y-85.43216
G01 X37.13076 Y-85.52124
G01 X37.19753 Y-85.69747
G01 X37.21585 Y-85.75987
G01 X37.23685 Y-85.89650
G01 X37.26698 Y-86.17760
G01 X37.01610 Y-86.32911
G01 X37.01559 Y-86.52228
G01 X37.00404 Y-86.71743
G01 X36.96634 Y-87.04433
G01 X36.92593 Y-87.20371
G01 X36.89568 Y-87.37143
G01 X36.87305 Y-87.44217
G01 X36.80223 Y-87.61494
G01 X36.83873 Y-87.66787
G01 X36.88796 Y-87.75433
G01 X36.95918 Y-87.89886
G01 X36.98202 Y-87.95601
G01 X37.03149 Y-88.16109
G01 X37.05230 Y-88.33434
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X37.83929 Y-87.70424 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X37.83929 Y-87.70424
G01 X37.83929 Y-87.45469
G01 X37.80421 Y-87.38453
G01 X37.77828 Y-87.35858
G01 X37.70815 Y-87.32352
G01 X37.52525 Y-87.32352
G01 X37.45512 Y-87.35858
G01 X37.42916 Y-87.38453
G01 X37.39411 Y-87.45466
G01 X37.39411 Y-87.70424
G01 X37.42916 Y-87.77437
G01 X37.45509 Y-87.80031
G01 X37.52525 Y-87.83538
G01 X37.70815 Y-87.83538
G01 X37.77828 Y-87.80031
G01 X37.80421 Y-87.77437
G01 X37.83929 Y-87.70424
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X35.93930 Y-85.45032 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X35.93930 Y-85.45032
G01 X35.90424 Y-85.52045
G01 X35.87828 Y-85.54639
G01 X35.80813 Y-85.58146
G01 X35.69192 Y-85.58146
G01 X35.62177 Y-85.54639
G01 X35.59581 Y-85.52045
G01 X35.56076 Y-85.45032
G01 X35.56076 Y-85.13409
G01 X35.59581 Y-85.06396
G01 X35.62177 Y-85.03801
G01 X35.69190 Y-85.00295
G01 X35.80815 Y-85.00295
G01 X35.87828 Y-85.03801
G01 X35.90424 Y-85.06396
G01 X35.93930 Y-85.13409
G01 X35.93930 Y-85.45032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X35.17262 Y-87.45764 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X35.17262 Y-87.45764
G01 X35.11598 Y-87.68420
G01 X35.07089 Y-87.77437
G01 X35.04496 Y-87.80031
G01 X34.97481 Y-87.83538
G01 X34.92525 Y-87.83538
G01 X34.85510 Y-87.80031
G01 X34.82916 Y-87.77437
G01 X34.78408 Y-87.68420
G01 X34.72744 Y-87.45764
G01 X34.72744 Y-87.16795
G01 X34.78408 Y-86.94138
G01 X34.82916 Y-86.85121
G01 X34.85510 Y-86.82528
G01 X34.92525 Y-86.79020
G01 X34.97481 Y-86.79020
G01 X35.04496 Y-86.82528
G01 X35.07089 Y-86.85121
G01 X35.11598 Y-86.94138
G01 X35.17262 Y-87.16795
G01 X35.17262 Y-87.45764
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X31.73928 Y-85.45032 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X31.73928 Y-85.45032
G01 X31.70423 Y-85.52045
G01 X31.67829 Y-85.54639
G01 X31.60814 Y-85.58146
G01 X31.49191 Y-85.58146
G01 X31.42178 Y-85.54639
G01 X31.39584 Y-85.52045
G01 X31.36077 Y-85.45032
G01 X31.36077 Y-85.13409
G01 X31.39584 Y-85.06394
G01 X31.42178 Y-85.03801
G01 X31.49191 Y-85.00295
G01 X31.60816 Y-85.00295
G01 X31.67829 Y-85.03801
G01 X31.70423 Y-85.06394
G01 X31.73928 Y-85.13407
G01 X31.73928 Y-85.45032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X27.77261 Y-87.83538 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X27.77261 Y-87.83538
G01 X27.52524 Y-87.83538
G01 X27.48226 Y-87.81390
G01 X27.46077 Y-87.77092
G01 X27.46077 Y-87.72134
G01 X27.48226 Y-87.67836
G01 X27.52524 Y-87.65687
G01 X27.77261 Y-87.65687
G01 X27.77261 Y-87.83538
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X26.53929 Y-85.45032 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X26.53929 Y-85.45032
G01 X26.50421 Y-85.52045
G01 X26.47828 Y-85.54639
G01 X26.40815 Y-85.58146
G01 X26.29192 Y-85.58146
G01 X26.22176 Y-85.54639
G01 X26.19580 Y-85.52045
G01 X26.16075 Y-85.45032
G01 X26.16075 Y-85.13409
G01 X26.19580 Y-85.06396
G01 X26.22176 Y-85.03801
G01 X26.29189 Y-85.00295
G01 X26.40815 Y-85.00295
G01 X26.47828 Y-85.03801
G01 X26.50421 Y-85.06394
G01 X26.53929 Y-85.13409
G01 X26.53929 Y-85.45032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X21.61651 Y-84.92434 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X21.61651 Y-84.92434
G01 X21.58448 Y-85.12650
G01 X21.52124 Y-85.32122
G01 X21.42833 Y-85.50359
G01 X21.30801 Y-85.66920
G01 X21.16323 Y-85.81395
G01 X20.99764 Y-85.93427
G01 X20.81525 Y-86.02718
G01 X20.73894 Y-86.05197
G01 X20.62055 Y-86.09043
G01 X20.41837 Y-86.12246
G01 X20.21367 Y-86.12246
G01 X20.01149 Y-86.09043
G01 X19.81680 Y-86.02718
G01 X19.63440 Y-85.93427
G01 X19.46882 Y-85.81395
G01 X19.32406 Y-85.66920
G01 X19.20372 Y-85.50359
G01 X19.11080 Y-85.32119
G01 X19.04756 Y-85.12650
G01 X19.01553 Y-84.92434
G01 X19.01553 Y-84.71962
G01 X19.04756 Y-84.51743
G01 X19.11080 Y-84.32274
G01 X19.20372 Y-84.14034
G01 X19.32406 Y-83.97476
G01 X19.46882 Y-83.83001
G01 X19.63440 Y-83.70969
G01 X19.81680 Y-83.61677
G01 X20.01149 Y-83.55350
G01 X20.21367 Y-83.52147
G01 X20.41837 Y-83.52147
G01 X20.62055 Y-83.55350
G01 X20.81525 Y-83.61677
G01 X20.99764 Y-83.70969
G01 X21.16323 Y-83.83001
G01 X21.30801 Y-83.97476
G01 X21.42833 Y-84.14034
G01 X21.52124 Y-84.32274
G01 X21.58448 Y-84.51743
G01 X21.61651 Y-84.71962
G01 X21.61651 Y-84.92434
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X22.22528 Y-73.65004 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X22.22528 Y-73.65004
G01 X22.21707 Y-73.55027
G01 X22.17963 Y-73.43800
G01 X22.14803 Y-73.38411
G01 X22.10666 Y-73.32622
G01 X22.03625 Y-73.25639
G01 X21.93711 Y-73.19518
G01 X21.82474 Y-73.15797
G01 X21.76226 Y-73.15091
G01 X20.47501 Y-73.14974
G01 X20.37539 Y-73.15843
G01 X20.26318 Y-73.19564
G01 X20.16386 Y-73.25644
G01 X20.08162 Y-73.33889
G01 X19.94550 Y-73.56239
G01 X19.85121 Y-73.58449
G01 X19.78136 Y-73.59454
G01 X19.70941 Y-73.59973
G01 X17.97093 Y-73.59973
G01 X17.83108 Y-73.58492
G01 X17.71670 Y-73.55611
G01 X17.61142 Y-73.35591
G01 X17.56808 Y-73.28919
G01 X17.53915 Y-73.25749
G01 X17.48589 Y-73.20684
G01 X17.39691 Y-73.15076
G01 X17.34980 Y-73.13140
G01 X17.27466 Y-73.10826
G01 X17.17477 Y-73.09973
G01 X15.89930 Y-73.10039
G01 X15.82539 Y-73.10829
G01 X15.71289 Y-73.14507
G01 X15.62895 Y-73.19602
G01 X15.59720 Y-73.22155
G01 X15.53131 Y-73.28865
G01 X15.51531 Y-73.31255
G01 X15.47040 Y-73.38797
G01 X15.44508 Y-73.45906
G01 X15.43314 Y-73.50028
G01 X15.42519 Y-73.57966
G01 X15.42488 Y-74.33346
G01 X15.41437 Y-74.47366
G01 X15.36240 Y-74.54351
G01 X15.31516 Y-74.59807
G01 X14.68389 Y-75.22632
G01 X14.60683 Y-75.28352
G01 X14.53047 Y-75.29454
G01 X14.45852 Y-75.29972
G01 X13.67589 Y-75.29972
G01 X13.57401 Y-75.29187
G01 X13.44135 Y-75.26101
G01 X13.37147 Y-75.23569
G01 X13.16505 Y-75.12248
G01 X13.14079 Y-75.10470
G01 X13.03538 Y-75.11570
G01 X12.95001 Y-75.11872
G01 X11.65004 Y-75.11872
G01 X11.46208 Y-75.10574
G01 X11.29855 Y-75.20374
G01 X11.22868 Y-75.23564
G01 X11.06596 Y-75.28448
G01 X10.99611 Y-75.29454
G01 X10.92416 Y-75.29972
G01 X9.94153 Y-75.29972
G01 X9.88834 Y-75.29759
G01 X9.79322 Y-75.28352
G01 X9.73140 Y-75.23729
G01 X9.67691 Y-75.19010
G01 X7.98624 Y-73.50122
G01 X7.91258 Y-73.45233
G01 X7.82922 Y-73.41862
G01 X7.59594 Y-73.37234
G01 X7.54240 Y-73.30824
G01 X7.39686 Y-73.11733
G01 X7.29025 Y-73.01250
G01 X7.15045 Y-72.91098
G01 X7.09076 Y-72.87819
G01 X6.97385 Y-72.82386
G01 X6.83222 Y-72.77867
G01 X6.70788 Y-72.75769
G01 X6.66145 Y-72.75177
G01 X6.59823 Y-72.74997
G01 X6.26463 Y-72.75071
G01 X6.16765 Y-72.76117
G01 X6.06790 Y-72.77903
G01 X5.90331 Y-72.83196
G01 X5.74964 Y-72.91103
G01 X5.64817 Y-72.98243
G01 X5.56130 Y-73.05815
G01 X5.48779 Y-73.13493
G01 X5.46095 Y-73.16856
G01 X5.38602 Y-73.27456
G01 X5.30707 Y-73.42833
G01 X5.25361 Y-73.59274
G01 X5.22727 Y-73.76356
G01 X5.22503 Y-73.87763
G01 X5.22671 Y-73.93640
G01 X5.24296 Y-74.04961
G01 X5.25399 Y-74.10712
G01 X5.27321 Y-74.17272
G01 X5.30707 Y-74.27163
G01 X5.35198 Y-74.36343
G01 X5.40395 Y-74.45281
G01 X5.48744 Y-74.56533
G01 X5.58274 Y-74.66277
G01 X5.66125 Y-74.72787
G01 X5.83090 Y-74.84768
G01 X5.87306 Y-74.88362
G01 X5.99998 Y-75.00343
G01 X6.08220 Y-75.09998
G01 X6.81809 Y-75.10033
G01 X6.90875 Y-74.99574
G01 X6.96465 Y-74.93800
G01 X7.02597 Y-74.88469
G01 X7.08172 Y-74.83945
G01 X7.25901 Y-74.71219
G01 X7.45337 Y-74.54552
G01 X7.57478 Y-74.46861
G01 X7.60100 Y-74.47839
G01 X7.75081 Y-74.55898
G01 X7.86178 Y-74.64849
G01 X9.29571 Y-76.08186
G01 X9.31921 Y-76.10269
G01 X9.38748 Y-76.14763
G01 X9.46904 Y-76.18179
G01 X9.55581 Y-76.19896
G01 X9.58954 Y-76.20008
G01 X14.80002 Y-76.20023
G01 X14.84421 Y-76.19860
G01 X14.93083 Y-76.18125
G01 X15.01274 Y-76.14793
G01 X15.08587 Y-76.09830
G01 X16.17693 Y-75.00983
G01 X16.21617 Y-74.97361
G01 X16.29323 Y-74.91641
G01 X16.36961 Y-74.90539
G01 X16.44154 Y-74.90023
G01 X17.18015 Y-74.90021
G01 X17.21223 Y-74.89919
G01 X17.29125 Y-74.88682
G01 X17.38693 Y-74.85441
G01 X17.48586 Y-74.79309
G01 X17.56847 Y-74.71103
G01 X17.69064 Y-74.53231
G01 X17.76801 Y-74.51545
G01 X17.90982 Y-74.50023
G01 X19.70941 Y-74.50023
G01 X19.76549 Y-74.50338
G01 X19.82046 Y-74.50953
G01 X19.94497 Y-74.53861
G01 X20.08172 Y-74.76096
G01 X20.12904 Y-74.81047
G01 X20.18340 Y-74.85639
G01 X20.26330 Y-74.90404
G01 X20.37550 Y-74.94115
G01 X20.46013 Y-74.94999
G01 X21.76223 Y-74.94895
G01 X21.82467 Y-74.94168
G01 X21.89500 Y-74.92032
G01 X21.93711 Y-74.90478
G01 X22.03635 Y-74.84369
G01 X22.11847 Y-74.76106
G01 X22.17984 Y-74.66208
G01 X22.21707 Y-74.54969
G01 X22.22517 Y-74.46023
G01 X22.22528 Y-73.65004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X12.02502 Y-63.56749 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X12.02502 Y-63.56749
G01 X11.34991 Y-63.56754
G01 X11.30683 Y-63.57183
G01 X11.26350 Y-63.58324
G01 X11.20429 Y-63.61267
G01 X11.16045 Y-63.64831
G01 X11.11951 Y-63.70084
G01 X11.09548 Y-63.75194
G01 X11.08021 Y-63.83228
G01 X11.08004 Y-64.07498
G01 X10.63002 Y-64.07498
G01 X10.63002 Y-63.79378
G01 X10.64011 Y-63.69505
G01 X10.69350 Y-63.53399
G01 X10.78245 Y-63.38974
G01 X10.90229 Y-63.26990
G01 X11.04653 Y-63.18093
G01 X11.20759 Y-63.12756
G01 X11.30632 Y-63.11748
G01 X12.02502 Y-63.11748
G01 X12.02502 Y-63.56749
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X12.02502 Y-65.58247 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X12.02502 Y-65.58247
G01 X11.30632 Y-65.58247
G01 X11.20759 Y-65.57239
G01 X11.04653 Y-65.51902
G01 X10.90229 Y-65.43004
G01 X10.78245 Y-65.31021
G01 X10.69350 Y-65.16596
G01 X10.64011 Y-65.00490
G01 X10.63002 Y-64.90617
G01 X10.63002 Y-64.62499
G01 X11.08004 Y-64.62499
G01 X11.08021 Y-64.86771
G01 X11.09548 Y-64.94803
G01 X11.11951 Y-64.99913
G01 X11.16086 Y-65.05199
G01 X11.20858 Y-65.09007
G01 X11.26350 Y-65.11674
G01 X11.30683 Y-65.12817
G01 X11.34991 Y-65.13243
G01 X12.02502 Y-65.13248
G01 X12.02502 Y-65.58247
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X13.97002 Y-64.07498 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X13.97002 Y-64.07498
G01 X13.51999 Y-64.07498
G01 X13.51981 Y-63.83228
G01 X13.50454 Y-63.75194
G01 X13.48051 Y-63.70084
G01 X13.43957 Y-63.64831
G01 X13.39573 Y-63.61267
G01 X13.33655 Y-63.58324
G01 X13.29319 Y-63.57183
G01 X13.25011 Y-63.56754
G01 X12.57503 Y-63.56749
G01 X12.57503 Y-63.11748
G01 X13.29372 Y-63.11748
G01 X13.39245 Y-63.12756
G01 X13.55351 Y-63.18095
G01 X13.69776 Y-63.26990
G01 X13.81760 Y-63.38974
G01 X13.90657 Y-63.53399
G01 X13.95994 Y-63.69505
G01 X13.97002 Y-63.79378
G01 X13.97002 Y-64.07498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X13.97002 Y-64.90617 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X13.97002 Y-64.90617
G01 X13.95994 Y-65.00490
G01 X13.90657 Y-65.16596
G01 X13.81760 Y-65.31021
G01 X13.69776 Y-65.43004
G01 X13.55351 Y-65.51902
G01 X13.39245 Y-65.57239
G01 X13.29372 Y-65.58247
G01 X12.57503 Y-65.58247
G01 X12.57503 Y-65.13248
G01 X13.25011 Y-65.13243
G01 X13.29319 Y-65.12817
G01 X13.33655 Y-65.11674
G01 X13.38671 Y-65.09304
G01 X13.44345 Y-65.04765
G01 X13.48341 Y-64.99433
G01 X13.50640 Y-64.94221
G01 X13.51981 Y-64.86771
G01 X13.51999 Y-64.62499
G01 X13.97002 Y-64.62499
G01 X13.97002 Y-64.90617
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X16.27502 Y-63.73752 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X16.27502 Y-63.73752
G01 X15.88470 Y-63.73795
G01 X15.81432 Y-63.75136
G01 X15.75399 Y-63.77960
G01 X15.71355 Y-63.81051
G01 X15.68287 Y-63.84389
G01 X15.65836 Y-63.88141
G01 X15.64028 Y-63.92240
G01 X15.62521 Y-64.00226
G01 X15.62504 Y-64.14996
G01 X15.17502 Y-64.14996
G01 X15.17502 Y-63.96378
G01 X15.18513 Y-63.86505
G01 X15.23850 Y-63.70399
G01 X15.32745 Y-63.55974
G01 X15.44729 Y-63.43990
G01 X15.59153 Y-63.35093
G01 X15.75259 Y-63.29756
G01 X15.85132 Y-63.28748
G01 X16.27502 Y-63.28748
G01 X16.27502 Y-63.73752
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X16.27502 Y-65.56248 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X16.27502 Y-65.56248
G01 X15.85132 Y-65.56248
G01 X15.75259 Y-65.55237
G01 X15.59153 Y-65.49901
G01 X15.44729 Y-65.41003
G01 X15.32745 Y-65.29022
G01 X15.23850 Y-65.14597
G01 X15.18513 Y-64.98491
G01 X15.17502 Y-64.88618
G01 X15.17502 Y-64.69997
G01 X15.62504 Y-64.69997
G01 X15.62521 Y-64.84772
G01 X15.64028 Y-64.92756
G01 X15.65836 Y-64.96858
G01 X15.68287 Y-65.00609
G01 X15.71355 Y-65.03944
G01 X15.75399 Y-65.07038
G01 X15.81432 Y-65.09863
G01 X15.88470 Y-65.11201
G01 X16.27502 Y-65.11247
G01 X16.27502 Y-65.56248
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X17.92501 Y-64.88618 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X17.92501 Y-64.88618
G01 X17.91492 Y-64.98491
G01 X17.86156 Y-65.14597
G01 X17.77261 Y-65.29022
G01 X17.65277 Y-65.41003
G01 X17.50852 Y-65.49901
G01 X17.34746 Y-65.55237
G01 X17.24873 Y-65.56248
G01 X16.82503 Y-65.56248
G01 X16.82503 Y-65.11247
G01 X17.21533 Y-65.11201
G01 X17.28571 Y-65.09863
G01 X17.34563 Y-65.07069
G01 X17.38157 Y-65.04391
G01 X17.41271 Y-65.01168
G01 X17.43839 Y-64.97434
G01 X17.45955 Y-64.92804
G01 X17.47482 Y-64.84772
G01 X17.47499 Y-64.69997
G01 X17.92501 Y-64.69997
G01 X17.92501 Y-64.88618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X17.92503 Y-64.14996 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X17.92503 Y-64.14996
G01 X17.47499 Y-64.14996
G01 X17.47482 Y-64.00226
G01 X17.45955 Y-63.92194
G01 X17.43839 Y-63.87564
G01 X17.41271 Y-63.83830
G01 X17.38157 Y-63.80604
G01 X17.34563 Y-63.77930
G01 X17.28571 Y-63.75136
G01 X17.21533 Y-63.73795
G01 X16.82503 Y-63.73752
G01 X16.82503 Y-63.28748
G01 X17.24873 Y-63.28748
G01 X17.34746 Y-63.29756
G01 X17.50852 Y-63.35093
G01 X17.65277 Y-63.43990
G01 X17.77261 Y-63.55974
G01 X17.86156 Y-63.70399
G01 X17.91492 Y-63.86505
G01 X17.92503 Y-63.96378
G01 X17.92503 Y-64.14996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X22.02510 Y-63.88941 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X22.02510 Y-63.88941
G01 X22.02286 Y-63.93693
G01 X21.99406 Y-64.03886
G01 X21.91987 Y-64.15712
G01 X21.76086 Y-64.36523
G01 X20.03915 Y-64.36523
G01 X19.84695 Y-64.10963
G01 X19.80638 Y-64.03919
G01 X19.78238 Y-63.95984
G01 X19.77684 Y-63.93701
G01 X19.77547 Y-63.90150
G01 X19.77697 Y-63.52418
G01 X19.81720 Y-63.33287
G01 X19.76082 Y-63.24382
G01 X19.68164 Y-63.14836
G01 X18.44314 Y-61.90983
G01 X18.38858 Y-61.86259
G01 X18.32683 Y-61.81641
G01 X18.23171 Y-61.80237
G01 X18.17850 Y-61.80023
G01 X10.29157 Y-61.80023
G01 X10.21961 Y-61.80541
G01 X10.14323 Y-61.81641
G01 X10.06619 Y-61.87361
G01 X10.02693 Y-61.90983
G01 X8.55990 Y-63.37686
G01 X8.51265 Y-63.43139
G01 X8.46648 Y-63.49317
G01 X8.45243 Y-63.58806
G01 X8.45027 Y-63.64150
G01 X8.45027 Y-69.45846
G01 X8.45545 Y-69.53039
G01 X8.46648 Y-69.60677
G01 X8.52378 Y-69.68396
G01 X9.17692 Y-70.34009
G01 X9.23140 Y-70.38729
G01 X9.29322 Y-70.43351
G01 X9.41486 Y-70.44898
G01 X10.87666 Y-70.44972
G01 X11.01849 Y-70.43448
G01 X11.11730 Y-70.41091
G01 X11.22421 Y-70.22584
G01 X11.25669 Y-70.17649
G01 X11.33945 Y-70.09468
G01 X11.43840 Y-70.03362
G01 X11.54856 Y-69.99635
G01 X11.61280 Y-69.98828
G01 X12.95001 Y-69.98724
G01 X13.04968 Y-69.99577
G01 X13.16174 Y-70.03341
G01 X13.23324 Y-70.07515
G01 X13.27404 Y-70.10565
G01 X13.34516 Y-70.17873
G01 X13.48379 Y-70.40989
G01 X13.61231 Y-70.44040
G01 X13.72336 Y-70.44972
G01 X15.15938 Y-70.44972
G01 X15.23136 Y-70.44454
G01 X15.30121 Y-70.43448
G01 X15.39578 Y-70.41231
G01 X15.53172 Y-70.18899
G01 X15.57904 Y-70.13948
G01 X15.63339 Y-70.09356
G01 X15.71330 Y-70.04591
G01 X15.82549 Y-70.00880
G01 X15.91013 Y-69.99996
G01 X17.21223 Y-70.00100
G01 X17.27466 Y-70.00827
G01 X17.38711 Y-70.04517
G01 X17.48581 Y-70.10692
G01 X17.53225 Y-70.15005
G01 X17.56872 Y-70.18868
G01 X17.62678 Y-70.28243
G01 X17.66692 Y-70.40029
G01 X17.67527 Y-70.49999
G01 X17.67527 Y-71.29998
G01 X17.67197 Y-71.36110
G01 X17.66184 Y-71.41634
G01 X17.62993 Y-71.51210
G01 X17.59572 Y-71.57037
G01 X17.56849 Y-71.61108
G01 X17.48559 Y-71.69272
G01 X17.40151 Y-71.74677
G01 X17.36430 Y-71.76343
G01 X17.27474 Y-71.79198
G01 X17.21226 Y-71.79904
G01 X15.92503 Y-71.80024
G01 X15.82539 Y-71.79153
G01 X15.71317 Y-71.75431
G01 X15.61386 Y-71.69351
G01 X15.53161 Y-71.61106
G01 X15.39466 Y-71.38850
G01 X15.27045 Y-71.35952
G01 X15.15938 Y-71.35023
G01 X13.72336 Y-71.35023
G01 X13.58153 Y-71.36544
G01 X13.48288 Y-71.38899
G01 X13.34521 Y-71.62114
G01 X13.27394 Y-71.69437
G01 X13.23317 Y-71.72485
G01 X13.16174 Y-71.76656
G01 X13.04968 Y-71.80420
G01 X12.94993 Y-71.81271
G01 X11.63464 Y-71.81248
G01 X11.55049 Y-71.80364
G01 X11.43830 Y-71.76656
G01 X11.35839 Y-71.71888
G01 X11.30404 Y-71.67296
G01 X11.25669 Y-71.62345
G01 X11.11641 Y-71.39010
G01 X10.98773 Y-71.35952
G01 X10.87666 Y-71.35023
G01 X9.07364 Y-71.34954
G01 X9.03208 Y-71.34499
G01 X8.96917 Y-71.33138
G01 X8.89304 Y-71.30039
G01 X8.81921 Y-71.25269
G01 X8.78164 Y-71.21832
G01 X7.68164 Y-70.11833
G01 X7.65134 Y-70.08612
G01 X7.62117 Y-70.04279
G01 X7.60237 Y-70.01251
G01 X7.57887 Y-69.95871
G01 X7.56861 Y-69.93085
G01 X7.55502 Y-69.86791
G01 X7.54977 Y-69.79996
G01 X7.54977 Y-63.29995
G01 X7.55170 Y-63.25580
G01 X7.56816 Y-63.16896
G01 X7.60303 Y-63.08778
G01 X7.66026 Y-63.00473
G01 X9.63150 Y-61.03175
G01 X9.66414 Y-61.00168
G01 X9.69739 Y-60.97786
G01 X9.73732 Y-60.95202
G01 X9.76010 Y-60.94227
G01 X9.81920 Y-60.91870
G01 X9.90584 Y-60.90135
G01 X9.95004 Y-60.89973
G01 X18.53052 Y-60.89985
G01 X18.56425 Y-60.90100
G01 X18.65101 Y-60.91817
G01 X18.73260 Y-60.95230
G01 X18.80085 Y-60.99724
G01 X18.82434 Y-61.01806
G01 X20.87692 Y-63.07010
G01 X20.93145 Y-63.11735
G01 X20.99330 Y-63.16358
G01 X21.08809 Y-63.17762
G01 X21.14156 Y-63.17978
G01 X21.68083 Y-63.18197
G01 X21.78461 Y-63.21120
G01 X21.87130 Y-63.26248
G01 X21.94252 Y-63.33371
G01 X21.96772 Y-63.37364
G01 X21.99355 Y-63.42050
G01 X22.02319 Y-63.52296
G01 X22.02510 Y-63.88941
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X27.15821 Y-58.86181 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X27.15821 Y-58.86181
G01 X27.35857 Y-58.70357
G01 X27.58841 Y-58.49414
G01 X27.69644 Y-58.42988
G01 X27.80030 Y-58.39546
G01 X27.86281 Y-58.38840
G01 X29.23725 Y-58.38850
G01 X29.29168 Y-58.39445
G01 X29.41210 Y-58.43267
G01 X29.51124 Y-58.49386
G01 X29.59346 Y-58.57639
G01 X29.65485 Y-58.67540
G01 X29.69183 Y-58.78779
G01 X29.70017 Y-58.87728
G01 X29.69943 Y-59.74969
G01 X29.69087 Y-59.81195
G01 X29.66323 Y-59.90166
G01 X29.63644 Y-59.95652
G01 X29.59326 Y-60.02340
G01 X29.51099 Y-60.10575
G01 X29.45732 Y-60.14113
G01 X29.41231 Y-60.16696
G01 X29.36501 Y-60.18431
G01 X29.15427 Y-60.24141
G01 X29.06095 Y-60.27339
G01 X29.01838 Y-60.41845
G01 X29.00248 Y-60.52048
G01 X29.00029 Y-64.10000
G01 X28.98206 Y-64.44595
G01 X29.08960 Y-64.49344
G01 X29.24350 Y-64.53675
G01 X29.30809 Y-64.54531
G01 X29.37449 Y-64.54973
G01 X29.65848 Y-64.54973
G01 X29.73044 Y-64.54455
G01 X29.80685 Y-64.53353
G01 X29.88401 Y-64.47622
G01 X29.92313 Y-64.44010
G01 X31.86516 Y-62.49810
G01 X31.91240 Y-62.44351
G01 X31.95858 Y-62.38176
G01 X31.97263 Y-62.28690
G01 X31.97476 Y-62.23348
G01 X31.97476 Y-60.53013
G01 X31.96961 Y-60.45815
G01 X31.95955 Y-60.38830
G01 X31.91492 Y-60.23501
G01 X31.79488 Y-60.19185
G01 X31.65904 Y-60.15482
G01 X31.58840 Y-60.13000
G01 X31.48871 Y-60.06871
G01 X31.46481 Y-60.04611
G01 X31.40631 Y-59.98629
G01 X31.34520 Y-59.88705
G01 X31.31578 Y-59.80130
G01 X31.30501 Y-59.75121
G01 X31.29978 Y-59.67443
G01 X31.30072 Y-58.84388
G01 X31.30725 Y-58.78330
G01 X31.34413 Y-58.66663
G01 X31.37413 Y-58.61345
G01 X31.40661 Y-58.56389
G01 X31.48871 Y-58.48124
G01 X31.51268 Y-58.46552
G01 X31.58789 Y-58.42008
G01 X31.61566 Y-58.40984
G01 X31.70034 Y-58.38299
G01 X31.76282 Y-58.37603
G01 X33.08723 Y-58.37608
G01 X33.14964 Y-58.38342
G01 X33.26188 Y-58.42064
G01 X33.32028 Y-58.45452
G01 X33.37011 Y-58.48977
G01 X33.41420 Y-58.53252
G01 X33.45375 Y-58.57905
G01 X33.58708 Y-58.80905
G01 X33.72053 Y-58.84139
G01 X33.83170 Y-58.85073
G01 X34.99739 Y-58.85073
G01 X35.13922 Y-58.83549
G01 X35.23312 Y-58.81352
G01 X35.35929 Y-58.60504
G01 X35.39883 Y-58.55853
G01 X35.44290 Y-58.51578
G01 X35.49276 Y-58.48053
G01 X35.55113 Y-58.44654
G01 X35.66337 Y-58.40926
G01 X35.76302 Y-58.40072
G01 X37.04623 Y-58.40181
G01 X37.11262 Y-58.40943
G01 X37.22466 Y-58.44713
G01 X37.32359 Y-58.50819
G01 X37.40635 Y-58.58995
G01 X37.43886 Y-58.63935
G01 X37.54988 Y-58.83341
G01 X37.68229 Y-58.86539
G01 X37.79344 Y-58.87471
G01 X39.83350 Y-58.87471
G01 X39.90548 Y-58.86953
G01 X39.98186 Y-58.85851
G01 X40.05887 Y-58.80133
G01 X40.09814 Y-58.76511
G01 X40.55404 Y-58.31152
G01 X40.62753 Y-58.26237
G01 X40.69722 Y-58.23255
G01 X40.72737 Y-58.22384
G01 X40.79580 Y-58.21134
G01 X40.84005 Y-58.20971
G01 X42.46047 Y-58.20971
G01 X42.53245 Y-58.20453
G01 X42.66450 Y-58.18182
G01 X42.73913 Y-58.08955
G01 X42.84667 Y-57.94482
G01 X42.94147 Y-57.84769
G01 X43.03646 Y-57.77123
G01 X43.21893 Y-57.64642
G01 X43.29803 Y-57.58421
G01 X43.48807 Y-57.38983
G01 X43.87992 Y-57.38993
G01 X44.02589 Y-57.23786
G01 X44.11403 Y-57.15963
G01 X44.37636 Y-56.97568
G01 X44.44629 Y-56.91342
G01 X44.53384 Y-56.82023
G01 X44.62317 Y-56.69549
G01 X44.65015 Y-56.64672
G01 X44.70171 Y-56.54152
G01 X44.74956 Y-56.39765
G01 X44.76818 Y-56.30728
G01 X44.78243 Y-56.20644
G01 X44.78213 Y-56.03354
G01 X44.75553 Y-55.86273
G01 X44.72137 Y-55.75303
G01 X44.69208 Y-55.67710
G01 X44.62325 Y-55.54439
G01 X44.57479 Y-55.47431
G01 X44.52195 Y-55.40436
G01 X44.43580 Y-55.31635
G01 X44.37461 Y-55.26270
G01 X44.25975 Y-55.18048
G01 X44.16542 Y-55.13065
G01 X44.09142 Y-55.09679
G01 X43.94116 Y-55.04899
G01 X43.85241 Y-55.03278
G01 X43.77052 Y-55.02151
G01 X43.59760 Y-55.02178
G01 X43.42686 Y-55.04878
G01 X43.26234 Y-55.10195
G01 X43.17664 Y-55.14376
G01 X43.10827 Y-55.18041
G01 X42.96862 Y-55.28231
G01 X42.84637 Y-55.40456
G01 X42.73595 Y-55.55371
G01 X42.66334 Y-55.64213
G01 X42.53245 Y-55.66453
G01 X42.46047 Y-55.66971
G01 X37.72870 Y-55.66971
G01 X37.67251 Y-55.66656
G01 X37.61755 Y-55.66039
G01 X37.51811 Y-55.63956
G01 X37.40637 Y-55.49001
G01 X37.36647 Y-55.44741
G01 X37.32423 Y-55.40736
G01 X37.22514 Y-55.34607
G01 X37.11272 Y-55.30898
G01 X37.01293 Y-55.30073
G01 X35.71191 Y-55.30296
G01 X35.66332 Y-55.30901
G01 X35.55103 Y-55.34630
G01 X35.45187 Y-55.40743
G01 X35.36937 Y-55.48968
G01 X35.32131 Y-55.56552
G01 X35.30320 Y-55.60205
G01 X35.27097 Y-55.70126
G01 X35.26404 Y-55.76377
G01 X35.26289 Y-56.61124
G01 X35.27097 Y-56.70070
G01 X35.30821 Y-56.81307
G01 X35.36960 Y-56.91205
G01 X35.45172 Y-56.99470
G01 X35.55098 Y-57.05579
G01 X35.59297 Y-57.07131
G01 X35.66337 Y-57.09270
G01 X35.72586 Y-57.09996
G01 X37.01763 Y-57.10121
G01 X37.11252 Y-57.09196
G01 X37.19261 Y-57.06768
G01 X37.24826 Y-57.04251
G01 X37.32359 Y-56.99379
G01 X37.40635 Y-56.91195
G01 X37.46937 Y-56.81038
G01 X37.55872 Y-56.61650
G01 X37.67861 Y-56.58543
G01 X37.82047 Y-56.57022
G01 X42.46047 Y-56.57022
G01 X42.55290 Y-56.57667
G01 X42.66260 Y-56.59869
G01 X42.75358 Y-56.70969
G01 X42.84639 Y-56.83542
G01 X42.93974 Y-56.93085
G01 X43.02744 Y-57.00240
G01 X43.20133 Y-57.12082
G01 X43.26938 Y-57.17177
G01 X43.41634 Y-57.31114
G01 X43.48807 Y-57.38983
G01 X43.87992 Y-57.38993
G01 X43.98927 Y-57.50557
G01 X44.09178 Y-57.60237
G01 X44.15840 Y-57.65345
G01 X44.31393 Y-57.75841
G01 X44.38805 Y-57.81322
G01 X44.46389 Y-57.88401
G01 X44.52810 Y-57.95226
G01 X44.62320 Y-58.08444
G01 X44.70176 Y-58.23839
G01 X44.75553 Y-58.40273
G01 X44.77545 Y-58.52028
G01 X44.78197 Y-58.57357
G01 X44.78205 Y-58.74639
G01 X44.75553 Y-58.91723
G01 X44.70153 Y-59.08144
G01 X44.62333 Y-59.23559
G01 X44.54367 Y-59.34733
G01 X44.52175 Y-59.37545
G01 X44.46331 Y-59.43648
G01 X44.39996 Y-59.49688
G01 X44.27949 Y-59.58535
G01 X44.14949 Y-59.67382
G01 X44.07273 Y-59.73346
G01 X44.01434 Y-59.78876
G01 X43.87954 Y-59.92980
G01 X42.24553 Y-59.92945
G01 X42.07794 Y-60.00963
G01 X41.88399 Y-60.11321
G01 X41.75269 Y-60.19013
G01 X41.53199 Y-60.33115
G01 X41.25770 Y-60.77839
G01 X40.95226 Y-61.25741
G01 X40.48661 Y-61.93881
G01 X40.10807 Y-62.46937
G01 X39.73383 Y-62.74788
G01 X39.44663 Y-62.97958
G01 X38.78089 Y-63.15837
G01 X38.09136 Y-63.57168
G01 X37.70889 Y-63.61389
G01 X37.37097 Y-63.63729
G01 X37.17681 Y-63.94282
G01 X36.85578 Y-64.41775
G01 X36.52261 Y-64.86690
G01 X36.22662 Y-65.22888
G01 X36.14526 Y-65.32227
G01 X35.88085 Y-65.60759
G01 X35.72301 Y-65.76466
G01 X35.49607 Y-65.97302
G01 X35.40457 Y-66.05130
G01 X35.19703 Y-66.21658
G01 X35.01242 Y-66.34912
G01 X34.83884 Y-66.46136
G01 X34.67600 Y-66.55575
G01 X34.43749 Y-66.67497
G01 X34.21578 Y-66.76553
G01 X34.06688 Y-66.81531
G01 X33.93300 Y-66.85262
G01 X33.80547 Y-66.88150
G01 X33.68070 Y-66.90347
G01 X33.51779 Y-66.92288
G01 X33.39467 Y-66.93047
G01 X33.25683 Y-66.93184
G01 X33.15515 Y-66.92803
G01 X33.01664 Y-66.91630
G01 X32.93305 Y-66.90497
G01 X24.39695 Y-66.90599
G01 X24.28443 Y-67.07436
G01 X24.09578 Y-67.39120
G01 X24.00061 Y-67.53990
G01 X23.88654 Y-67.70169
G01 X23.73785 Y-67.90085
G01 X23.88654 Y-67.70169
G01 X24.00061 Y-67.53990
G01 X24.09578 Y-67.39120
G01 X24.28443 Y-67.07436
G01 X24.39695 Y-66.90599
G01 X24.44859 Y-66.65971
G01 X24.46436 Y-66.60340
G01 X24.52362 Y-66.43096
G01 X24.65197 Y-66.12057
G01 X24.70211 Y-66.01374
G01 X24.82654 Y-65.79085
G01 X24.91895 Y-65.63454
G01 X24.87234 Y-65.50000
G01 X24.84772 Y-65.41643
G01 X24.82283 Y-65.29319
G01 X24.81349 Y-65.18727
G01 X24.81252 Y-64.84998
G01 X24.81506 Y-64.78199
G01 X24.82489 Y-64.69410
G01 X24.86291 Y-64.53144
G01 X24.92756 Y-64.36492
G01 X24.86688 Y-64.21102
G01 X24.85166 Y-64.16004
G01 X24.82405 Y-64.02824
G01 X24.81793 Y-63.97727
G01 X24.81272 Y-63.88908
G01 X24.81323 Y-63.55839
G01 X24.82570 Y-63.41885
G01 X24.85209 Y-63.29632
G01 X24.89055 Y-63.18093
G01 X24.94678 Y-63.05608
G01 X25.02024 Y-62.92868
G01 X25.04706 Y-62.88781
G01 X25.18453 Y-62.70790
G01 X25.35727 Y-62.52276
G01 X25.35735 Y-60.80689
G01 X25.48582 Y-60.61860
G01 X25.51638 Y-60.56770
G01 X25.61732 Y-60.37265
G01 X25.67330 Y-60.23399
G01 X25.69398 Y-60.17293
G01 X25.73068 Y-60.03834
G01 X25.76139 Y-59.85208
G01 X25.76967 Y-59.70981
G01 X25.76936 Y-58.88208
G01 X25.53807 Y-58.69358
G01 X25.32949 Y-58.50204
G01 X25.27333 Y-58.46628
G01 X25.20934 Y-58.43516
G01 X25.12453 Y-58.40900
G01 X25.02989 Y-58.39976
G01 X23.74933 Y-58.40039
G01 X23.67539 Y-58.40829
G01 X23.56289 Y-58.44507
G01 X23.46396 Y-58.50656
G01 X23.41788 Y-58.54997
G01 X23.38131 Y-58.58866
G01 X23.32327 Y-58.68243
G01 X23.28314 Y-58.80029
G01 X23.27478 Y-58.90003
G01 X23.27488 Y-59.71024
G01 X23.28321 Y-59.79965
G01 X23.29675 Y-59.84573
G01 X23.32012 Y-59.91210
G01 X23.38136 Y-60.01126
G01 X23.46370 Y-60.09368
G01 X23.56668 Y-60.15667
G01 X23.75413 Y-60.24540
G01 X23.78456 Y-60.36361
G01 X23.79459 Y-60.43348
G01 X23.79977 Y-60.50544
G01 X23.79977 Y-65.15844
G01 X23.79764 Y-65.21166
G01 X23.78359 Y-65.30678
G01 X23.73734 Y-65.36860
G01 X23.69014 Y-65.42308
G01 X23.36401 Y-65.74622
G01 X23.28684 Y-65.80353
G01 X23.21044 Y-65.81455
G01 X23.13813 Y-65.81971
G01 X22.32751 Y-65.81910
G01 X22.21951 Y-65.80741
G01 X22.14966 Y-65.79232
G01 X21.97554 Y-65.72616
G01 X21.93094 Y-65.70188
G01 X21.86998 Y-65.64043
G01 X21.85098 Y-65.63614
G01 X20.03917 Y-65.63472
G01 X19.99953 Y-65.69123
G01 X19.88042 Y-65.84297
G01 X19.84443 Y-65.89494
G01 X19.80600 Y-65.96106
G01 X19.77702 Y-66.06418
G01 X19.77547 Y-66.44119
G01 X19.77705 Y-66.47873
G01 X19.87608 Y-66.85874
G01 X19.95327 Y-66.87909
G01 X20.08835 Y-66.90060
G01 X20.17501 Y-66.90497
G01 X21.95207 Y-66.90507
G01 X22.02517 Y-66.93040
G01 X22.19929 Y-67.00977
G01 X22.35880 Y-67.10741
G01 X22.39967 Y-67.13626
G01 X22.57493 Y-67.27723
G01 X22.69607 Y-67.39103
G01 X22.85004 Y-67.54518
G01 X23.48001 Y-67.80611
G01 X23.73785 Y-67.90085
G01 X23.83391 Y-68.07944
G01 X24.05895 Y-68.41937
G01 X24.25217 Y-68.64637
G01 X24.50945 Y-68.88655
G01 X24.54920 Y-68.91889
G01 X24.87859 Y-69.14838
G01 X25.14442 Y-69.29168
G01 X25.32540 Y-69.37301
G01 X25.51120 Y-69.44995
G01 X26.78564 Y-69.44977
G01 X27.17182 Y-69.42658
G01 X27.36687 Y-69.39996
G01 X30.69056 Y-69.39991
G01 X30.92937 Y-69.62948
G01 X31.01070 Y-69.70250
G01 X31.21680 Y-69.87560
G01 X31.32612 Y-69.96049
G01 X31.50943 Y-70.09188
G01 X31.69546 Y-70.21157
G01 X31.78698 Y-70.26532
G01 X31.94675 Y-70.35114
G01 X32.09455 Y-70.42132
G01 X32.23559 Y-70.48007
G01 X32.37148 Y-70.52912
G01 X32.50285 Y-70.56948
G01 X32.63054 Y-70.60202
G01 X32.75535 Y-70.62749
G01 X32.89036 Y-70.64797
G01 X33.01342 Y-70.66029
G01 X33.13295 Y-70.66638
G01 X33.25177 Y-70.66676
G01 X33.40846 Y-70.65843
G01 X33.56084 Y-70.64101
G01 X33.72574 Y-70.61152
G01 X33.94377 Y-70.55584
G01 X34.11441 Y-70.49882
G01 X34.22624 Y-70.45510
G01 X34.41984 Y-70.36755
G01 X34.61143 Y-70.26615
G01 X34.70955 Y-70.20844
G01 X34.81120 Y-70.14456
G01 X34.96419 Y-70.03997
G01 X42.26763 Y-70.03994
G01 X42.38246 Y-70.09046
G01 X43.87997 Y-70.08945
G01 X44.01449 Y-69.94878
G01 X44.06999 Y-69.89597
G01 X44.13646 Y-69.84309
G01 X44.31266 Y-69.72242
G01 X44.40029 Y-69.65726
G01 X44.52160 Y-69.53532
G01 X44.62358 Y-69.39575
G01 X44.68065 Y-69.28660
G01 X44.72104 Y-69.18775
G01 X44.75543 Y-69.07720
G01 X44.78223 Y-68.90642
G01 X44.78299 Y-68.74871
G01 X44.77004 Y-68.64421
G01 X44.75543 Y-68.56275
G01 X44.70166 Y-68.39844
G01 X44.62358 Y-68.24421
G01 X44.55124 Y-68.14248
G01 X44.48243 Y-68.06283
G01 X44.40014 Y-67.98285
G01 X44.32343 Y-67.92521
G01 X44.14596 Y-67.80484
G01 X44.07166 Y-67.74457
G01 X43.94004 Y-67.61678
G01 X43.87992 Y-67.54998
G01 X42.27190 Y-67.54980
G01 X42.24883 Y-67.55996
G01 X41.49684 Y-67.55996
G01 X40.25455 Y-68.07441
G01 X40.12991 Y-68.11863
G01 X40.04012 Y-68.14337
G01 X39.90058 Y-68.16839
G01 X39.83804 Y-68.17497
G01 X39.74554 Y-68.17982
G01 X33.53656 Y-68.17990
G01 X33.38718 Y-68.16293
G01 X33.29856 Y-68.15795
G01 X33.17981 Y-68.15757
G01 X33.01136 Y-68.16456
G01 X32.90128 Y-68.17520
G01 X32.77694 Y-68.19290
G01 X32.65038 Y-68.21719
G01 X32.52089 Y-68.24858
G01 X32.39109 Y-68.28663
G01 X32.26793 Y-68.32900
G01 X32.04474 Y-68.42092
G01 X31.89653 Y-68.49283
G01 X31.75640 Y-68.56870
G01 X31.50735 Y-68.72290
G01 X31.24202 Y-68.91404
G01 X31.04380 Y-69.07494
G01 X30.91045 Y-69.19191
G01 X30.69056 Y-69.39991
G01 X27.36687 Y-69.39996
G01 X27.17182 Y-69.42658
G01 X26.78564 Y-69.44977
G01 X25.51120 Y-69.44995
G01 X25.32540 Y-69.37301
G01 X25.14442 Y-69.29168
G01 X24.87859 Y-69.14838
G01 X24.54920 Y-68.91889
G01 X24.50945 Y-68.88655
G01 X24.25217 Y-68.64637
G01 X24.05895 Y-68.41937
G01 X23.83391 Y-68.07944
G01 X23.73785 Y-67.90085
G01 X23.48001 Y-67.80611
G01 X22.85004 Y-67.54518
G01 X22.60559 Y-67.30492
G01 X22.39967 Y-67.13626
G01 X22.35880 Y-67.10741
G01 X22.19929 Y-67.00977
G01 X22.02517 Y-66.93040
G01 X21.98431 Y-66.91587
G01 X21.95207 Y-66.90507
G01 X21.88360 Y-66.90426
G01 X20.17501 Y-66.90497
G01 X20.08835 Y-66.90060
G01 X19.99411 Y-66.88760
G01 X19.87608 Y-66.85874
G01 X19.72828 Y-66.93167
G01 X19.61568 Y-66.97594
G01 X19.50019 Y-66.99453
G01 X19.42820 Y-66.99971
G01 X17.91167 Y-66.99971
G01 X17.85546 Y-66.99656
G01 X17.80052 Y-66.99039
G01 X17.70146 Y-66.96969
G01 X17.59348 Y-66.82646
G01 X17.54982 Y-66.78051
G01 X17.51119 Y-66.74394
G01 X17.41210 Y-66.68267
G01 X17.29963 Y-66.64594
G01 X17.20514 Y-66.63726
G01 X15.90004 Y-66.63723
G01 X15.80032 Y-66.64549
G01 X15.68790 Y-66.68257
G01 X15.58871 Y-66.74373
G01 X15.50634 Y-66.82618
G01 X15.38003 Y-67.02072
G01 X15.29626 Y-67.03949
G01 X15.15445 Y-67.05473
G01 X14.01531 Y-67.05473
G01 X13.90413 Y-67.04538
G01 X13.77721 Y-67.01544
G01 X13.63835 Y-66.78648
G01 X13.59469 Y-66.74035
G01 X13.54937 Y-66.69946
G01 X13.45684 Y-66.64330
G01 X13.34447 Y-66.60667
G01 X13.26019 Y-66.59745
G01 X11.32946 Y-66.59789
G01 X11.24356 Y-66.60883
G01 X11.14290 Y-66.64256
G01 X11.04397 Y-66.70406
G01 X10.99779 Y-66.74754
G01 X10.96132 Y-66.78615
G01 X10.90328 Y-66.87995
G01 X10.86315 Y-66.99778
G01 X10.85476 Y-67.09745
G01 X10.85588 Y-68.14970
G01 X10.86315 Y-68.21218
G01 X10.87508 Y-68.25338
G01 X10.90041 Y-68.32445
G01 X10.92365 Y-68.36550
G01 X10.97328 Y-68.43654
G01 X11.04232 Y-68.50469
G01 X11.07605 Y-68.52768
G01 X11.14303 Y-68.56715
G01 X11.18496 Y-68.58279
G01 X11.25532 Y-68.60446
G01 X11.31778 Y-68.61200
G01 X13.24495 Y-68.61272
G01 X13.34475 Y-68.60446
G01 X13.42938 Y-68.57761
G01 X13.45715 Y-68.56738
G01 X13.55633 Y-68.50621
G01 X13.63873 Y-68.42376
G01 X13.77653 Y-68.19341
G01 X13.87348 Y-68.17042
G01 X14.01528 Y-68.15521
G01 X15.23029 Y-68.15519
G01 X15.28376 Y-68.15734
G01 X15.38508 Y-68.17299
G01 X15.42084 Y-68.18211
G01 X15.57609 Y-68.34436
G01 X15.66029 Y-68.40157
G01 X15.70599 Y-68.42402
G01 X15.78836 Y-68.45104
G01 X15.86286 Y-68.46156
G01 X17.20001 Y-68.46273
G01 X17.29973 Y-68.45445
G01 X17.41210 Y-68.41726
G01 X17.51119 Y-68.35602
G01 X17.54982 Y-68.31945
G01 X17.59354 Y-68.27345
G01 X17.70118 Y-68.12984
G01 X17.83971 Y-68.10540
G01 X17.91167 Y-68.10022
G01 X19.70003 Y-68.10022
G01 X19.84133 Y-68.09021
G01 X20.51710 Y-68.09021
G01 X20.57052 Y-68.09237
G01 X20.66541 Y-68.10642
G01 X20.72716 Y-68.15259
G01 X20.78172 Y-68.19984
G01 X21.99274 Y-69.41086
G01 X22.04549 Y-69.47291
G01 X22.09188 Y-69.53725
G01 X22.17590 Y-69.70453
G01 X22.20056 Y-69.77865
G01 X22.24687 Y-70.01525
G01 X21.99470 Y-70.03981
G01 X21.75324 Y-70.04987
G01 X20.42157 Y-70.05213
G01 X20.37537 Y-70.05825
G01 X20.26343 Y-70.09620
G01 X20.16645 Y-70.15510
G01 X20.11464 Y-70.20387
G01 X20.08136 Y-70.23870
G01 X20.02020 Y-70.33788
G01 X19.98314 Y-70.45028
G01 X19.97806 Y-70.48886
G01 X19.97479 Y-70.55005
G01 X19.97489 Y-71.36023
G01 X19.98299 Y-71.44969
G01 X20.02020 Y-71.56206
G01 X20.04364 Y-71.60301
G01 X20.08159 Y-71.66107
G01 X20.16371 Y-71.74372
G01 X20.26295 Y-71.80476
G01 X20.37537 Y-71.84169
G01 X20.43785 Y-71.84895
G01 X21.72454 Y-71.85022
G01 X21.82472 Y-71.84194
G01 X21.93716 Y-71.80489
G01 X22.03495 Y-71.74451
G01 X22.11298 Y-71.66592
G01 X22.22253 Y-71.52876
G01 X22.35700 Y-71.50539
G01 X22.42896 Y-71.50021
G01 X23.92710 Y-71.50021
G01 X23.98052 Y-71.50237
G01 X24.07541 Y-71.51642
G01 X24.13716 Y-71.56260
G01 X24.19172 Y-71.60984
G01 X24.37026 Y-71.78617
G01 X24.46004 Y-71.84639
G01 X24.55999 Y-71.88751
G01 X24.66601 Y-71.90842
G01 X24.70978 Y-71.91012
G01 X42.56407 Y-71.91118
G01 X42.64187 Y-71.91819
G01 X42.71835 Y-71.93377
G01 X42.77451 Y-71.99130
G01 X42.84505 Y-72.07344
G01 X42.97817 Y-72.20930
G01 X43.04017 Y-72.27804
G01 X43.15340 Y-72.43641
G01 X43.24207 Y-72.59069
G01 X43.37423 Y-72.61101
G01 X43.47967 Y-72.62162
G01 X43.65002 Y-72.62939
G01 X43.78916 Y-72.62769
G01 X43.95457 Y-72.61548
G01 X44.12516 Y-72.59096
G01 X44.21972 Y-72.43056
G01 X44.27862 Y-72.34116
G01 X44.36597 Y-72.23503
G01 X44.50616 Y-72.09246
G01 X44.58462 Y-72.00014
G01 X44.64944 Y-71.93331
G01 X44.76795 Y-71.91469
G01 X44.83493 Y-71.91022
G01 X46.16904 Y-71.90837
G01 X46.27504 Y-71.88746
G01 X46.37481 Y-71.84598
G01 X46.46429 Y-71.78556
G01 X46.50415 Y-71.74903
G01 X47.69632 Y-70.55673
G01 X47.72604 Y-70.52457
G01 X47.78601 Y-70.43473
G01 X47.82746 Y-70.33496
G01 X47.84885 Y-70.22902
G01 X47.84996 Y-70.19547
G01 X47.84844 Y-53.89598
G01 X47.82754 Y-53.78996
G01 X47.80899 Y-53.74180
G01 X47.78365 Y-53.68592
G01 X47.75355 Y-53.63919
G01 X47.70965 Y-53.58270
G01 X46.29962 Y-52.17396
G01 X46.20976 Y-52.11397
G01 X46.14943 Y-52.08730
G01 X46.11004 Y-52.07254
G01 X46.05939 Y-52.06093
G01 X46.00410 Y-52.05118
G01 X45.97054 Y-52.05009
G01 X33.92452 Y-52.04981
G01 X33.87059 Y-52.04691
G01 X33.75647 Y-52.03515
G01 X33.62850 Y-52.01148
G01 X33.61418 Y-51.98016
G01 X33.56526 Y-51.81737
G01 X33.54999 Y-51.67544
G01 X33.54961 Y-50.60203
G01 X33.53917 Y-50.53294
G01 X33.52899 Y-50.50391
G01 X33.49724 Y-50.43267
G01 X33.42960 Y-50.30059
G01 X32.77512 Y-50.30104
G01 X32.57070 Y-50.44059
G01 X32.45060 Y-50.53297
G01 X32.45002 Y-51.74993
G01 X32.44687 Y-51.82522
G01 X32.45002 Y-51.74993
G01 X32.45060 Y-50.53297
G01 X32.35289 Y-50.45817
G01 X32.12513 Y-50.30031
G01 X31.46305 Y-50.30028
G01 X31.30382 Y-50.60297
G01 X31.18266 Y-50.63449
G01 X31.04083 Y-50.64971
G01 X29.88482 Y-50.64971
G01 X29.77365 Y-50.64039
G01 X29.66608 Y-50.61699
G01 X29.54370 Y-50.43866
G01 X29.46136 Y-50.35624
G01 X29.36212 Y-50.29517
G01 X29.24965 Y-50.25845
G01 X29.14977 Y-50.24973
G01 X27.81279 Y-50.25052
G01 X27.75049 Y-50.25878
G01 X27.70931 Y-50.27026
G01 X27.63822 Y-50.29578
G01 X27.59720 Y-50.31880
G01 X27.53916 Y-50.35682
G01 X27.48958 Y-50.40394
G01 X27.35773 Y-50.54491
G01 X27.27602 Y-50.62474
G01 X27.23454 Y-50.62649
G01 X27.18569 Y-50.60826
G01 X27.03609 Y-50.52774
G01 X26.92504 Y-50.43823
G01 X26.05989 Y-49.57308
G01 X26.02377 Y-49.53394
G01 X25.96647 Y-49.45677
G01 X25.95547 Y-49.38039
G01 X25.95029 Y-49.30844
G01 X25.95029 Y-45.34997
G01 X25.94836 Y-45.30580
G01 X25.93190 Y-45.21896
G01 X25.89801 Y-45.13727
G01 X25.84836 Y-45.06412
G01 X25.81841 Y-45.03161
G01 X23.56840 Y-42.78160
G01 X23.53592 Y-42.75165
G01 X23.46274 Y-42.70200
G01 X23.38103 Y-42.66816
G01 X23.29418 Y-42.65153
G01 X23.25004 Y-42.64972
G01 X10.25586 Y-42.65163
G01 X10.16901 Y-42.66809
G01 X10.09794 Y-42.69730
G01 X10.04730 Y-42.72791
G01 X10.00551 Y-42.75925
G01 X8.71718 Y-44.04685
G01 X8.67730 Y-44.09862
G01 X8.64562 Y-44.15259
G01 X8.54842 Y-44.39745
G01 X8.41311 Y-44.43451
G01 X8.34324 Y-44.44454
G01 X8.15096 Y-44.45292
G01 X8.07948 Y-44.47921
G01 X8.02216 Y-44.52211
G01 X7.97925 Y-44.57941
G01 X7.95299 Y-44.65084
G01 X7.94977 Y-44.69999
G01 X7.94977 Y-46.21705
G01 X7.94763 Y-46.27047
G01 X7.93359 Y-46.36534
G01 X7.88743 Y-46.42709
G01 X7.84016 Y-46.48167
G01 X6.36221 Y-47.95858
G01 X6.26541 Y-48.03351
G01 X6.18906 Y-48.04453
G01 X6.11710 Y-48.04971
G01 X4.52424 Y-48.05037
G01 X4.46323 Y-48.05677
G01 X4.39013 Y-48.07288
G01 X4.29034 Y-48.11415
G01 X4.21520 Y-48.16287
G01 X4.16095 Y-48.21088
G01 X2.86095 Y-49.51087
G01 X2.82445 Y-49.55068
G01 X2.76387 Y-49.64011
G01 X2.72227 Y-49.73988
G01 X2.71569 Y-49.76800
G01 X2.70134 Y-49.84593
G01 X2.69979 Y-49.89995
G01 X2.70134 Y-56.75401
G01 X2.72224 Y-56.86011
G01 X2.74609 Y-56.92066
G01 X2.76387 Y-56.95980
G01 X2.82392 Y-57.04967
G01 X3.40725 Y-57.63532
G01 X3.44320 Y-57.67535
G01 X3.47647 Y-57.71662
G01 X3.54952 Y-57.83588
G01 X3.57878 Y-57.89996
G01 X3.49674 Y-58.05363
G01 X3.40723 Y-58.16463
G01 X2.82402 Y-58.75035
G01 X2.76408 Y-58.84022
G01 X2.73738 Y-58.90057
G01 X2.72026 Y-58.94878
G01 X2.70126 Y-59.04591
G01 X2.69979 Y-77.04996
G01 X2.70190 Y-77.10396
G01 X2.72272 Y-77.20995
G01 X2.76425 Y-77.30960
G01 X2.82402 Y-77.39957
G01 X4.70024 Y-79.27617
G01 X4.79006 Y-79.33634
G01 X4.89000 Y-79.37749
G01 X5.10146 Y-79.42115
G01 X5.17959 Y-79.44457
G01 X5.27093 Y-79.66169
G01 X5.33209 Y-79.76067
G01 X5.41385 Y-79.84350
G01 X5.47215 Y-79.88112
G01 X5.51294 Y-79.90477
G01 X5.62531 Y-79.94195
G01 X5.72500 Y-79.95023
G01 X7.17501 Y-79.95023
G01 X7.27461 Y-79.94152
G01 X7.38688 Y-79.90431
G01 X7.44527 Y-79.87043
G01 X7.49511 Y-79.83517
G01 X7.53915 Y-79.79247
G01 X7.57872 Y-79.74597
G01 X7.70786 Y-79.52649
G01 X7.80656 Y-79.50294
G01 X7.94839 Y-79.48773
G01 X10.88834 Y-79.48773
G01 X10.94445 Y-79.49087
G01 X10.99942 Y-79.49702
G01 X11.09858 Y-79.51775
G01 X11.20648 Y-79.66093
G01 X11.28885 Y-79.74350
G01 X11.38796 Y-79.80477
G01 X11.50030 Y-79.84195
G01 X11.59540 Y-79.85018
G01 X12.93723 Y-79.84894
G01 X12.99967 Y-79.84162
G01 X13.11216 Y-79.80487
G01 X13.21110 Y-79.74338
G01 X13.29276 Y-79.66050
G01 X13.34178 Y-79.58534
G01 X13.35989 Y-79.54884
G01 X13.39207 Y-79.44968
G01 X13.40027 Y-79.34998
G01 X13.40027 Y-78.52499
G01 X13.39207 Y-78.42527
G01 X13.35458 Y-78.31300
G01 X13.29370 Y-78.21369
G01 X13.27147 Y-78.18971
G01 X13.21120 Y-78.13144
G01 X13.13965 Y-78.08618
G01 X13.11216 Y-78.07007
G01 X13.01150 Y-78.03634
G01 X12.92573 Y-78.02540
G01 X11.60028 Y-78.02474
G01 X11.50030 Y-78.03299
G01 X11.38796 Y-78.07018
G01 X11.28870 Y-78.13124
G01 X11.20625 Y-78.21381
G01 X11.09782 Y-78.35786
G01 X10.96033 Y-78.38204
G01 X10.88829 Y-78.38719
G01 X8.00427 Y-78.38684
G01 X7.90430 Y-78.37686
G01 X7.83442 Y-78.36291
G01 X7.73051 Y-78.33195
G01 X7.62962 Y-78.03799
G01 X7.56711 Y-77.93751
G01 X7.47951 Y-77.85202
G01 X7.42782 Y-77.81861
G01 X7.17501 Y-77.68090
G01 X7.00504 Y-77.56299
G01 X6.87232 Y-77.58219
G01 X6.75657 Y-77.59306
G01 X6.60227 Y-77.59977
G01 X6.32564 Y-77.60000
G01 X6.11195 Y-77.59080
G01 X5.89303 Y-77.56248
G01 X5.71992 Y-77.68504
G01 X5.47672 Y-77.81628
G01 X5.41639 Y-77.85514
G01 X5.25340 Y-78.00205
G01 X5.16841 Y-78.06853
G01 X5.11891 Y-78.05006
G01 X4.96925 Y-77.96949
G01 X4.85825 Y-77.88001
G01 X3.89143 Y-76.91217
G01 X3.81647 Y-76.81534
G01 X3.80545 Y-76.73901
G01 X3.80027 Y-76.66706
G01 X3.80027 Y-59.48291
G01 X3.80243 Y-59.42950
G01 X3.81647 Y-59.33460
G01 X3.86265 Y-59.27283
G01 X3.90989 Y-59.21830
G01 X4.46834 Y-58.65985
G01 X4.50758 Y-58.62363
G01 X4.58467 Y-58.56641
G01 X4.66100 Y-58.55541
G01 X4.73369 Y-58.55023
G01 X4.97545 Y-58.55058
G01 X5.04644 Y-58.55523
G01 X5.12051 Y-58.56801
G01 X5.22762 Y-58.59760
G01 X5.32018 Y-58.81202
G01 X5.38134 Y-58.91126
G01 X5.41098 Y-58.94258
G01 X5.46382 Y-58.99358
G01 X5.56303 Y-59.05462
G01 X5.67553 Y-59.09102
G01 X5.73781 Y-59.09942
G01 X7.26224 Y-59.09894
G01 X7.32467 Y-59.09168
G01 X7.43691 Y-59.05439
G01 X7.48675 Y-59.02604
G01 X7.53635 Y-58.99371
G01 X7.61873 Y-58.91124
G01 X7.66925 Y-58.83077
G01 X7.69015 Y-58.78434
G01 X7.71690 Y-58.69965
G01 X7.72528 Y-58.59981
G01 X7.72457 Y-57.36278
G01 X7.71591 Y-57.30049
G01 X7.68096 Y-57.19171
G01 X7.61845 Y-57.08889
G01 X7.53595 Y-57.00624
G01 X7.47804 Y-56.96875
G01 X7.23013 Y-56.83359
G01 X7.05500 Y-56.71299
G01 X6.92234 Y-56.73220
G01 X6.80659 Y-56.74309
G01 X6.65223 Y-56.74980
G01 X6.37563 Y-56.74998
G01 X6.16402 Y-56.74098
G01 X5.94311 Y-56.71233
G01 X5.77504 Y-56.83225
G01 X5.52208 Y-56.96887
G01 X5.46387 Y-57.00644
G01 X5.42521 Y-57.04302
G01 X5.38162 Y-57.08889
G01 X5.31967 Y-57.18975
G01 X5.22716 Y-57.40187
G01 X5.10311 Y-57.43448
G01 X5.03326 Y-57.44454
G01 X4.94154 Y-57.44931
G01 X4.87807 Y-57.44680
G01 X4.78429 Y-57.43440
G01 X4.66834 Y-57.34009
G01 X3.90989 Y-56.58168
G01 X3.87367 Y-56.54241
G01 X3.81647 Y-56.46534
G01 X3.80545 Y-56.38902
G01 X3.80027 Y-56.31703
G01 X3.80027 Y-50.28291
G01 X3.80243 Y-50.22949
G01 X3.81647 Y-50.13460
G01 X3.86265 Y-50.07282
G01 X3.90989 Y-50.01829
G01 X4.66834 Y-49.25985
G01 X4.70758 Y-49.22363
G01 X4.78467 Y-49.16640
G01 X4.86100 Y-49.15538
G01 X4.93296 Y-49.15022
G01 X6.54883 Y-49.14864
G01 X6.66013 Y-49.12771
G01 X6.76000 Y-49.08634
G01 X6.84667 Y-49.02855
G01 X6.88911 Y-48.98903
G01 X9.15746 Y-46.72373
G01 X9.23467 Y-46.66640
G01 X9.31103 Y-46.65541
G01 X9.38299 Y-46.65022
G01 X9.90003 Y-46.65022
G01 X9.94913 Y-46.64702
G01 X10.02058 Y-46.62073
G01 X10.07788 Y-46.57781
G01 X10.12078 Y-46.52051
G01 X10.14666 Y-46.45050
G01 X10.16807 Y-46.28246
G01 X10.18590 Y-46.21261
G01 X10.21448 Y-46.12724
G01 X10.33604 Y-45.83374
G01 X10.32649 Y-45.72754
G01 X10.32040 Y-45.57519
G01 X10.32345 Y-45.42310
G01 X10.33604 Y-45.26618
G01 X10.19246 Y-44.91317
G01 X10.16548 Y-44.80451
G01 X10.14651 Y-44.64888
G01 X10.12124 Y-44.58040
G01 X9.99520 Y-44.44662
G01 X9.85410 Y-44.33910
G01 X9.89203 Y-44.23532
G01 X9.97254 Y-44.08571
G01 X10.01484 Y-44.02922
G01 X10.06208 Y-43.97466
G01 X10.37691 Y-43.65983
G01 X10.41616 Y-43.62364
G01 X10.49324 Y-43.56641
G01 X10.56957 Y-43.55541
G01 X10.64156 Y-43.55023
G01 X19.61210 Y-43.55104
G01 X19.74423 Y-43.56925
G01 X19.81410 Y-43.58762
G01 X19.99706 Y-43.66682
G01 X20.06694 Y-43.70895
G01 X20.21296 Y-43.81477
G01 X20.36490 Y-43.96260
G01 X20.47092 Y-43.86199
G01 X20.54080 Y-43.80149
G01 X20.77544 Y-43.64624
G01 X20.84532 Y-43.61434
G01 X21.00811 Y-43.56544
G01 X21.14994 Y-43.55023
G01 X22.90849 Y-43.55023
G01 X22.96170 Y-43.55236
G01 X23.05682 Y-43.56641
G01 X23.11865 Y-43.61266
G01 X23.17313 Y-43.65983
G01 X24.94016 Y-45.42686
G01 X24.97638 Y-45.46610
G01 X25.03360 Y-45.54319
G01 X25.04460 Y-45.61952
G01 X25.04978 Y-45.69150
G01 X25.04978 Y-49.64999
G01 X25.05161 Y-49.69413
G01 X25.06822 Y-49.78095
G01 X25.10208 Y-49.86269
G01 X25.15171 Y-49.93582
G01 X25.18166 Y-49.96835
G01 X26.72311 Y-51.50759
G01 X26.79979 Y-51.56045
G01 X26.88153 Y-51.59433
G01 X26.96829 Y-51.61161
G01 X27.07670 Y-51.61224
G01 X27.18783 Y-51.62166
G01 X27.31607 Y-51.65220
G01 X27.45630 Y-51.88628
G01 X27.53868 Y-51.96870
G01 X27.63794 Y-52.02977
G01 X27.75033 Y-52.06695
G01 X27.82189 Y-52.07442
G01 X29.15000 Y-52.07521
G01 X29.24965 Y-52.06652
G01 X29.31513 Y-52.04656
G01 X29.38071 Y-52.01890
G01 X29.46059 Y-51.96774
G01 X29.54337 Y-51.88595
G01 X29.60680 Y-51.78354
G01 X29.69519 Y-51.59596
G01 X29.81373 Y-51.56538
G01 X29.95546 Y-51.55019
G01 X30.99224 Y-51.55019
G01 X31.06641 Y-51.55435
G01 X31.18048 Y-51.57574
G01 X31.25035 Y-51.59672
G01 X31.28995 Y-51.61003
G01 X31.33036 Y-51.72842
G01 X31.35429 Y-51.81948
G01 X31.38063 Y-51.89225
G01 X31.39610 Y-51.92639
G01 X31.44728 Y-51.99291
G01 X31.52411 Y-52.05456
G01 X31.60900 Y-52.08971
G01 X31.67715 Y-52.09979
G01 X31.92292 Y-52.09985
G01 X31.99551 Y-52.08781
G01 X32.11507 Y-52.03309
G01 X32.30621 Y-51.91666
G01 X32.44687 Y-51.82522
G01 X32.55381 Y-52.00063
G01 X32.58568 Y-52.07046
G01 X32.63455 Y-52.23322
G01 X32.64977 Y-52.37508
G01 X32.64977 Y-52.86703
G01 X32.64763 Y-52.92021
G01 X32.63359 Y-53.01536
G01 X32.58741 Y-53.07714
G01 X32.54017 Y-53.13164
G01 X32.00539 Y-53.66822
G01 X31.93902 Y-53.76522
G01 X31.89722 Y-53.86487
G01 X31.87631 Y-53.97101
G01 X31.87441 Y-54.96657
G01 X31.86442 Y-55.06641
G01 X31.85048 Y-55.13629
G01 X31.82513 Y-55.22552
G01 X31.58802 Y-55.32031
G01 X31.48871 Y-55.38125
G01 X31.40659 Y-55.46392
G01 X31.37161 Y-55.51790
G01 X31.33877 Y-55.58102
G01 X31.31733 Y-55.64393
G01 X31.30453 Y-55.70360
G01 X31.30019 Y-55.75491
G01 X31.30075 Y-56.61221
G01 X31.30865 Y-56.67454
G01 X31.34563 Y-56.78686
G01 X31.40489 Y-56.88371
G01 X31.43935 Y-56.92122
G01 X31.48916 Y-56.96811
G01 X31.58274 Y-57.02656
G01 X31.69856 Y-57.06608
G01 X31.79490 Y-57.07520
G01 X33.05515 Y-57.07520
G01 X33.14971 Y-57.06697
G01 X33.26211 Y-57.02978
G01 X33.36135 Y-56.96869
G01 X33.44369 Y-56.88627
G01 X33.47069 Y-56.84540
G01 X33.50458 Y-56.78693
G01 X33.52368 Y-56.73529
G01 X33.54207 Y-56.67469
G01 X33.54943 Y-56.61218
G01 X33.55017 Y-55.76479
G01 X33.54207 Y-55.67525
G01 X33.50486 Y-55.56288
G01 X33.46503 Y-55.49616
G01 X33.44375 Y-55.46369
G01 X33.36119 Y-55.38145
G01 X33.26076 Y-55.32008
G01 X33.02538 Y-55.22468
G01 X32.99051 Y-55.09478
G01 X32.97527 Y-54.95298
G01 X32.97527 Y-54.40792
G01 X32.97743 Y-54.35448
G01 X32.99147 Y-54.25961
G01 X33.03762 Y-54.19786
G01 X33.08489 Y-54.14328
G01 X33.96833 Y-53.25984
G01 X34.00760 Y-53.22362
G01 X34.08466 Y-53.16642
G01 X34.16099 Y-53.15537
G01 X34.23295 Y-53.15021
G01 X45.56706 Y-53.15021
G01 X45.62050 Y-53.15237
G01 X45.71540 Y-53.16642
G01 X45.77717 Y-53.21259
G01 X45.83171 Y-53.25984
G01 X46.67628 Y-54.10741
G01 X46.73358 Y-54.18458
G01 X46.74461 Y-54.26098
G01 X46.74976 Y-54.33294
G01 X46.74976 Y-69.79204
G01 X46.74763 Y-69.84545
G01 X46.73358 Y-69.94035
G01 X46.68741 Y-70.00210
G01 X46.64016 Y-70.05665
G01 X45.97732 Y-70.71850
G01 X45.88042 Y-70.79351
G01 X45.80402 Y-70.80453
G01 X45.73206 Y-70.80971
G01 X44.83493 Y-70.80971
G01 X44.74250 Y-70.80326
G01 X44.64969 Y-70.78617
G01 X44.50611 Y-70.62744
G01 X44.39976 Y-70.52330
G01 X44.30443 Y-70.45170
G01 X44.15307 Y-70.34997
G01 X44.05432 Y-70.26844
G01 X43.94385 Y-70.16062
G01 X43.87997 Y-70.08945
G01 X44.01449 Y-69.94878
G01 X44.06999 Y-69.89597
G01 X44.13646 Y-69.84309
G01 X44.31266 Y-69.72242
G01 X44.40029 Y-69.65726
G01 X44.49904 Y-69.55988
G01 X44.55124 Y-69.49747
G01 X44.62358 Y-69.39575
G01 X44.70166 Y-69.24149
G01 X44.75543 Y-69.07720
G01 X44.78223 Y-68.90642
G01 X44.78223 Y-68.73354
G01 X44.75543 Y-68.56275
G01 X44.70166 Y-68.39844
G01 X44.62358 Y-68.24421
G01 X44.52160 Y-68.10464
G01 X44.40710 Y-67.98909
G01 X44.32343 Y-67.92521
G01 X44.14596 Y-67.80484
G01 X44.07166 Y-67.74457
G01 X43.94004 Y-67.61678
G01 X43.87992 Y-67.54998
G01 X43.95754 Y-67.46667
G01 X44.08058 Y-67.34675
G01 X44.14944 Y-67.29377
G01 X44.37451 Y-67.13708
G01 X44.43580 Y-67.08361
G01 X44.50969 Y-67.00865
G01 X44.58157 Y-66.91620
G01 X44.62317 Y-66.85549
G01 X44.70184 Y-66.70157
G01 X44.75513 Y-66.53713
G01 X44.77590 Y-66.41678
G01 X44.78393 Y-66.31165
G01 X44.78258 Y-66.19352
G01 X44.75495 Y-66.02285
G01 X44.73768 Y-65.96311
G01 X44.70191 Y-65.85834
G01 X44.62338 Y-65.70434
G01 X44.52152 Y-65.56472
G01 X44.40029 Y-65.44267
G01 X44.30189 Y-65.36997
G01 X44.11398 Y-65.24074
G01 X43.98949 Y-65.12631
G01 X43.87979 Y-65.01013
G01 X42.21823 Y-65.00962
G01 X41.99600 Y-64.90076
G01 X41.79732 Y-64.79012
G01 X41.58617 Y-64.65900
G01 X41.36280 Y-64.50521
G01 X41.20494 Y-64.38715
G01 X40.20373 Y-63.57183
G01 X39.44663 Y-62.97958
G01 X39.73383 Y-62.74788
G01 X40.10807 Y-62.46937
G01 X43.87979 Y-62.47013
G01 X43.98949 Y-62.58631
G01 X44.11398 Y-62.70074
G01 X44.30189 Y-62.82997
G01 X44.40029 Y-62.90267
G01 X44.52152 Y-63.02472
G01 X44.60519 Y-63.13731
G01 X44.65800 Y-63.22832
G01 X44.70191 Y-63.31834
G01 X44.74471 Y-63.44600
G01 X44.76343 Y-63.52517
G01 X44.77946 Y-63.62936
G01 X44.78411 Y-63.74625
G01 X44.78213 Y-63.82642
G01 X44.77590 Y-63.87678
G01 X44.75518 Y-63.99715
G01 X44.73697 Y-64.05910
G01 X44.70181 Y-64.16152
G01 X44.68741 Y-64.19263
G01 X44.62317 Y-64.31549
G01 X44.58246 Y-64.37500
G01 X44.52193 Y-64.45560
G01 X44.39996 Y-64.57688
G01 X44.09173 Y-64.79738
G01 X43.95736 Y-64.92662
G01 X43.87979 Y-65.01013
G01 X43.95736 Y-64.92662
G01 X44.09173 Y-64.79738
G01 X44.39996 Y-64.57688
G01 X44.52193 Y-64.45560
G01 X44.59638 Y-64.35537
G01 X44.65086 Y-64.26530
G01 X44.70181 Y-64.16152
G01 X44.75518 Y-63.99715
G01 X44.77918 Y-63.85288
G01 X44.78393 Y-63.77165
G01 X44.78246 Y-63.65352
G01 X44.76752 Y-63.54887
G01 X44.74471 Y-63.44600
G01 X44.70382 Y-63.32327
G01 X44.62338 Y-63.16434
G01 X44.52152 Y-63.02472
G01 X44.40029 Y-62.90267
G01 X44.30189 Y-62.82997
G01 X44.11398 Y-62.70074
G01 X43.98949 Y-62.58631
G01 X43.87979 Y-62.47013
G01 X43.95736 Y-62.38662
G01 X44.09173 Y-62.25738
G01 X44.39996 Y-62.03688
G01 X44.52193 Y-61.91560
G01 X44.58246 Y-61.83500
G01 X44.62317 Y-61.77549
G01 X44.68741 Y-61.65263
G01 X44.70181 Y-61.62154
G01 X44.73697 Y-61.51910
G01 X44.75518 Y-61.45715
G01 X44.77590 Y-61.33678
G01 X44.78213 Y-61.28642
G01 X44.78411 Y-61.20625
G01 X44.77946 Y-61.08936
G01 X44.76343 Y-60.98517
G01 X44.74471 Y-60.90600
G01 X44.70191 Y-60.77834
G01 X44.65800 Y-60.68832
G01 X44.60519 Y-60.59731
G01 X44.52152 Y-60.48472
G01 X44.40029 Y-60.36267
G01 X44.30189 Y-60.28997
G01 X44.11398 Y-60.16074
G01 X43.98949 Y-60.04631
G01 X43.87954 Y-59.92980
G01 X42.24553 Y-59.92945
G01 X42.07794 Y-60.00963
G01 X41.96534 Y-60.06833
G01 X41.75269 Y-60.19013
G01 X41.66118 Y-60.24687
G01 X41.53199 Y-60.33115
G01 X41.25770 Y-60.77839
G01 X40.95226 Y-61.25741
G01 X40.48661 Y-61.93881
G01 X40.10807 Y-62.46937
G01 X39.73383 Y-62.74788
G01 X39.44663 Y-62.97958
G01 X38.78089 Y-63.15837
G01 X38.09136 Y-63.57168
G01 X37.70889 Y-63.61389
G01 X37.37097 Y-63.63729
G01 X37.01542 Y-63.43810
G01 X36.69017 Y-63.26238
G01 X36.30297 Y-63.07417
G01 X35.93104 Y-62.91486
G01 X35.40526 Y-62.71339
G01 X34.64532 Y-63.07681
G01 X34.26787 Y-63.24869
G01 X33.85642 Y-63.42741
G01 X33.26231 Y-63.66378
G01 X33.06767 Y-63.75248
G01 X32.85281 Y-63.86518
G01 X32.64687 Y-63.98994
G01 X32.46915 Y-64.11331
G01 X32.29937 Y-64.24717
G01 X32.13318 Y-64.39578
G01 X31.98744 Y-64.54348
G01 X31.84997 Y-64.70063
G01 X31.71619 Y-64.87389
G01 X31.56956 Y-65.09281
G01 X30.49341 Y-65.53812
G01 X30.33557 Y-65.58971
G01 X30.27299 Y-65.60472
G01 X30.13118 Y-65.62733
G01 X30.00001 Y-65.63497
G01 X24.91895 Y-65.63454
G01 X24.85915 Y-65.45730
G01 X24.82283 Y-65.29319
G01 X24.81252 Y-65.14996
G01 X24.81252 Y-64.84998
G01 X24.81506 Y-64.78199
G01 X24.83193 Y-64.65324
G01 X24.86291 Y-64.53144
G01 X24.92756 Y-64.36492
G01 X27.10045 Y-64.36545
G01 X27.19118 Y-64.33368
G01 X27.34482 Y-64.26312
G01 X27.41625 Y-64.16802
G01 X27.49532 Y-64.03967
G01 X27.56166 Y-63.90317
G01 X27.63720 Y-63.72187
G01 X27.63405 Y-63.47595
G01 X27.61411 Y-63.29794
G01 X27.57393 Y-63.11288
G01 X27.50728 Y-62.91049
G01 X27.50728 Y-60.73046
G01 X27.39319 Y-60.54849
G01 X27.29430 Y-60.34862
G01 X27.26936 Y-60.28759
G01 X27.22125 Y-60.14601
G01 X27.20467 Y-60.08497
G01 X27.17165 Y-59.91586
G01 X27.15857 Y-59.76275
G01 X27.15821 Y-58.86181
G01 X27.01076 Y-58.63615
G01 X26.97886 Y-58.56628
G01 X26.93002 Y-58.40357
G01 X26.91996 Y-58.33372
G01 X26.91480 Y-58.26176
G01 X26.91480 Y-57.21251
G01 X26.92136 Y-57.13138
G01 X26.93406 Y-57.05305
G01 X26.99298 Y-56.87522
G01 X27.02796 Y-56.80537
G01 X27.15747 Y-56.61134
G01 X27.15763 Y-55.73679
G01 X27.01081 Y-55.51195
G01 X26.97889 Y-55.44210
G01 X26.93002 Y-55.27926
G01 X26.91996 Y-55.20939
G01 X26.91480 Y-55.13746
G01 X26.91371 Y-53.86261
G01 X26.89634 Y-53.76448
G01 X26.86200 Y-53.68303
G01 X26.81300 Y-53.60949
G01 X26.78290 Y-53.57711
G01 X24.43741 Y-51.23157
G01 X24.40503 Y-51.20150
G01 X24.33630 Y-51.15517
G01 X24.25004 Y-51.11806
G01 X24.16319 Y-51.10160
G01 X24.11902 Y-51.09969
G01 X19.97153 Y-51.09969
G01 X19.91835 Y-51.09756
G01 X19.82322 Y-51.08351
G01 X19.81791 Y-51.07958
G01 X19.70689 Y-50.99007
G01 X15.17675 Y-46.45937
G01 X15.11221 Y-46.38025
G01 X15.03428 Y-46.25325
G01 X15.08854 Y-46.10138
G01 X15.14754 Y-45.97146
G01 X15.17535 Y-45.89282
G01 X15.20136 Y-45.80717
G01 X15.22168 Y-45.68815
G01 X15.22806 Y-45.63638
G01 X15.23004 Y-45.57009
G01 X15.22821 Y-45.46354
G01 X15.20431 Y-45.30776
G01 X15.17942 Y-45.21970
G01 X15.14764 Y-45.12848
G01 X15.07210 Y-44.97901
G01 X14.96751 Y-44.83468
G01 X14.85425 Y-44.72013
G01 X14.78148 Y-44.66341
G01 X14.70589 Y-44.61058
G01 X14.55173 Y-44.53191
G01 X14.38722 Y-44.47857
G01 X14.29463 Y-44.46217
G01 X14.21645 Y-44.45168
G01 X14.07675 Y-44.45046
G01 X14.00579 Y-44.45630
G01 X13.87287 Y-44.47878
G01 X13.70835 Y-44.53194
G01 X13.64137 Y-44.56425
G01 X13.55428 Y-44.61043
G01 X13.46510 Y-44.67342
G01 X13.41475 Y-44.71248
G01 X13.35537 Y-44.76882
G01 X13.27543 Y-44.85625
G01 X13.08504 Y-45.12744
G01 X12.96573 Y-45.25561
G01 X12.85961 Y-45.35439
G01 X12.85948 Y-45.74517
G01 X12.94313 Y-45.82267
G01 X13.07401 Y-45.95904
G01 X13.29273 Y-46.26630
G01 X13.41485 Y-46.38736
G01 X13.55455 Y-46.48906
G01 X13.59862 Y-46.51352
G01 X13.70835 Y-46.56800
G01 X13.81343 Y-46.60364
G01 X13.87312 Y-46.62086
G01 X13.99027 Y-46.64111
G01 X14.08714 Y-46.66300
G01 X14.18894 Y-46.74560
G01 X19.33471 Y-51.88961
G01 X19.41781 Y-51.94691
G01 X19.49904 Y-51.98181
G01 X19.58589 Y-51.99830
G01 X19.63001 Y-52.00023
G01 X23.77750 Y-52.00023
G01 X23.83071 Y-52.00233
G01 X23.92583 Y-52.01641
G01 X23.98766 Y-52.06263
G01 X24.04216 Y-52.10983
G01 X25.90464 Y-53.97236
G01 X25.94089 Y-54.01160
G01 X25.99809 Y-54.08869
G01 X26.00909 Y-54.16502
G01 X26.01427 Y-54.23700
G01 X26.01427 Y-55.17822
G01 X26.00772 Y-55.25927
G01 X25.99502 Y-55.33758
G01 X25.93609 Y-55.51551
G01 X25.90111 Y-55.58536
G01 X25.76964 Y-55.78173
G01 X25.76957 Y-56.62016
G01 X25.76964 Y-55.78173
G01 X25.54341 Y-55.59803
G01 X25.33619 Y-55.40644
G01 X25.24691 Y-55.35077
G01 X25.19979 Y-55.33141
G01 X25.12466 Y-55.30825
G01 X24.99482 Y-55.29290
G01 X24.87937 Y-55.26461
G01 X24.75941 Y-55.07926
G01 X24.72573 Y-55.03911
G01 X23.26843 Y-53.58163
G01 X23.23589 Y-53.55166
G01 X23.16271 Y-53.50200
G01 X23.08085 Y-53.46868
G01 X23.01798 Y-53.45496
G01 X22.95001 Y-53.44973
G01 X19.42066 Y-53.44973
G01 X19.36458 Y-53.44658
G01 X19.30961 Y-53.44041
G01 X19.18576 Y-53.41155
G01 X19.05017 Y-53.19121
G01 X18.97900 Y-53.11813
G01 X18.93824 Y-53.08765
G01 X18.86679 Y-53.04592
G01 X18.75467 Y-53.00825
G01 X18.65500 Y-52.99972
G01 X17.37182 Y-53.00081
G01 X17.30547 Y-53.00843
G01 X17.19341 Y-53.04610
G01 X17.09445 Y-53.10718
G01 X17.01170 Y-53.18895
G01 X16.87578 Y-53.41231
G01 X16.78122 Y-53.43449
G01 X16.63938 Y-53.44973
G01 X14.80736 Y-53.44973
G01 X14.71993 Y-53.44450
G01 X14.65745 Y-53.42222
G01 X14.57810 Y-53.40172
G01 X13.42453 Y-53.39972
G01 X13.29235 Y-53.39009
G01 X13.10127 Y-53.36690
G01 X12.89880 Y-53.58305
G01 X12.70769 Y-53.55986
G01 X12.57551 Y-53.55021
G01 X11.41923 Y-53.54798
G01 X11.31547 Y-53.51877
G01 X11.20655 Y-53.46083
G01 X11.09403 Y-53.45024
G01 X7.84857 Y-53.45024
G01 X7.77664 Y-53.45539
G01 X7.64641 Y-53.47762
G01 X7.60153 Y-53.52969
G01 X7.46267 Y-53.71539
G01 X7.36920 Y-53.81089
G01 X7.28858 Y-53.87759
G01 X7.13176 Y-53.98960
G01 X7.02635 Y-54.07703
G01 X6.94080 Y-54.16619
G01 X6.86795 Y-54.24998
G01 X6.13219 Y-54.24990
G01 X6.02594 Y-54.12854
G01 X5.90717 Y-54.01970
G01 X5.66013 Y-53.83860
G01 X5.58406 Y-53.76471
G01 X5.53748 Y-53.71534
G01 X5.44825 Y-53.59443
G01 X5.39214 Y-53.49415
G01 X5.35734 Y-53.42153
G01 X5.30969 Y-53.27823
G01 X5.29305 Y-53.20017
G01 X5.27659 Y-53.08643
G01 X5.27718 Y-52.91351
G01 X5.28795 Y-52.83129
G01 X5.30382 Y-52.74280
G01 X5.31391 Y-52.70764
G01 X5.35729 Y-52.57838
G01 X5.43595 Y-52.42446
G01 X5.53710 Y-52.28430
G01 X5.65980 Y-52.16253
G01 X5.79940 Y-52.06060
G01 X5.95345 Y-51.98227
G01 X6.11789 Y-51.92888
G01 X6.24794 Y-51.90668
G01 X6.31860 Y-51.90051
G01 X6.71144 Y-51.90178
G01 X6.88218 Y-51.92875
G01 X7.04662 Y-51.98217
G01 X7.20059 Y-52.06070
G01 X7.34052 Y-52.16225
G01 X7.46269 Y-52.28448
G01 X7.55911 Y-52.41519
G01 X7.64641 Y-52.52121
G01 X7.75604 Y-52.54325
G01 X7.80184 Y-52.54755
G01 X11.09403 Y-52.54970
G01 X11.20655 Y-52.53911
G01 X11.31547 Y-52.48118
G01 X11.41923 Y-52.45197
G01 X12.70701 Y-52.45209
G01 X12.80962 Y-52.48120
G01 X12.93977 Y-52.55148
G01 X13.09530 Y-52.64310
G01 X13.05397 Y-52.90279
G01 X13.04988 Y-53.02545
G01 X13.05494 Y-53.09763
G01 X13.07851 Y-53.25920
G01 X13.10127 Y-53.36690
G01 X12.89880 Y-53.58305
G01 X12.92156 Y-53.69075
G01 X12.94513 Y-53.85234
G01 X12.95016 Y-53.92186
G01 X12.95435 Y-54.16535
G01 X12.98189 Y-54.25928
G01 X13.02662 Y-54.33670
G01 X13.05296 Y-54.36794
G01 X13.10403 Y-54.41711
G01 X13.19055 Y-54.46850
G01 X13.29423 Y-54.49804
G01 X14.58082 Y-54.49827
G01 X14.68450 Y-54.46850
G01 X14.75740 Y-54.42643
G01 X14.84462 Y-54.36547
G01 X14.99054 Y-54.35023
G01 X16.63938 Y-54.35023
G01 X16.69562 Y-54.35338
G01 X16.75056 Y-54.35956
G01 X16.87497 Y-54.38861
G01 X17.01218 Y-54.61063
G01 X17.06991 Y-54.67119
G01 X17.11756 Y-54.70934
G01 X17.19341 Y-54.75384
G01 X17.30542 Y-54.79151
G01 X17.39991 Y-54.80020
G01 X18.65500 Y-54.80022
G01 X18.74667 Y-54.79301
G01 X18.78614 Y-54.78290
G01 X18.86676 Y-54.75404
G01 X18.93831 Y-54.71226
G01 X18.97908 Y-54.68175
G01 X19.04845 Y-54.61104
G01 X19.18492 Y-54.38742
G01 X19.27885 Y-54.36545
G01 X19.34873 Y-54.35539
G01 X19.42066 Y-54.35023
G01 X22.60849 Y-54.35023
G01 X22.66193 Y-54.35237
G01 X22.75685 Y-54.36641
G01 X22.81859 Y-54.41259
G01 X22.87313 Y-54.45984
G01 X23.37579 Y-54.96250
G01 X23.44496 Y-55.04373
G01 X23.51806 Y-55.16301
G01 X23.56233 Y-55.26197
G01 X23.50693 Y-55.33583
G01 X23.38156 Y-55.48841
G01 X23.32012 Y-55.58785
G01 X23.28321 Y-55.70029
G01 X23.27562 Y-55.76275
G01 X23.27488 Y-56.61017
G01 X23.28321 Y-56.69966
G01 X23.32019 Y-56.81205
G01 X23.34359 Y-56.85287
G01 X23.38159 Y-56.91106
G01 X23.46381 Y-56.99356
G01 X23.56294 Y-57.05478
G01 X23.66850 Y-57.08985
G01 X23.73777 Y-57.09950
G01 X25.04033 Y-57.09999
G01 X25.12471 Y-57.09196
G01 X25.23703 Y-57.05462
G01 X25.33655 Y-56.99326
G01 X25.58354 Y-56.76760
G01 X25.76957 Y-56.62016
G01 X25.91826 Y-56.84718
G01 X25.95016 Y-56.91706
G01 X25.99906 Y-57.07990
G01 X26.01427 Y-57.22178
G01 X26.01412 Y-58.28716
G01 X26.00596 Y-58.37743
G01 X25.99337 Y-58.44730
G01 X25.93614 Y-58.61540
G01 X25.90116 Y-58.68528
G01 X25.76936 Y-58.88208
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X19.38002 Y-57.44868 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X19.38002 Y-57.44868
G01 X19.36994 Y-57.54741
G01 X19.31657 Y-57.70847
G01 X19.22759 Y-57.85272
G01 X19.10776 Y-57.97255
G01 X18.96351 Y-58.06150
G01 X18.80245 Y-58.11487
G01 X18.70372 Y-58.12498
G01 X18.30504 Y-58.12498
G01 X18.30504 Y-57.67497
G01 X18.67034 Y-57.67451
G01 X18.74070 Y-57.66112
G01 X18.80062 Y-57.63318
G01 X18.83659 Y-57.60641
G01 X18.86770 Y-57.57418
G01 X18.89341 Y-57.53684
G01 X18.91456 Y-57.49054
G01 X18.92980 Y-57.41022
G01 X18.92998 Y-57.27499
G01 X19.38002 Y-57.27499
G01 X19.38002 Y-57.44868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X19.38002 Y-56.72496 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X19.38002 Y-56.72496
G01 X18.92998 Y-56.72496
G01 X18.92980 Y-56.58975
G01 X18.91456 Y-56.50944
G01 X18.89341 Y-56.46313
G01 X18.86770 Y-56.42580
G01 X18.83659 Y-56.39356
G01 X18.80062 Y-56.36679
G01 X18.74070 Y-56.33885
G01 X18.67034 Y-56.32547
G01 X18.30504 Y-56.32501
G01 X18.30504 Y-55.87497
G01 X18.70372 Y-55.87497
G01 X18.80245 Y-55.88508
G01 X18.96351 Y-55.93845
G01 X19.10776 Y-56.02740
G01 X19.22759 Y-56.14723
G01 X19.31657 Y-56.29148
G01 X19.36994 Y-56.45257
G01 X19.38002 Y-56.55127
G01 X19.38002 Y-56.72496
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X17.75503 Y-58.12498 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X17.75503 Y-58.12498
G01 X17.75503 Y-57.67497
G01 X17.38970 Y-57.67451
G01 X17.31932 Y-57.66112
G01 X17.25899 Y-57.63288
G01 X17.21853 Y-57.60194
G01 X17.18787 Y-57.56859
G01 X17.16336 Y-57.53108
G01 X17.14528 Y-57.49006
G01 X17.13021 Y-57.41022
G01 X17.13004 Y-57.27499
G01 X16.68002 Y-57.27499
G01 X16.68002 Y-57.44868
G01 X16.69011 Y-57.54741
G01 X16.74350 Y-57.70847
G01 X16.83245 Y-57.85272
G01 X16.95229 Y-57.97255
G01 X17.09653 Y-58.06150
G01 X17.25759 Y-58.11487
G01 X17.35632 Y-58.12498
G01 X17.75503 Y-58.12498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X17.75503 Y-56.32501 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X17.75503 Y-56.32501
G01 X17.75503 Y-55.87497
G01 X17.35632 Y-55.87497
G01 X17.25759 Y-55.88508
G01 X17.09653 Y-55.93845
G01 X16.95229 Y-56.02740
G01 X16.83245 Y-56.14723
G01 X16.74350 Y-56.29148
G01 X16.69011 Y-56.45254
G01 X16.68002 Y-56.55127
G01 X16.68002 Y-56.72496
G01 X17.13004 Y-56.72496
G01 X17.13021 Y-56.58975
G01 X17.14528 Y-56.50992
G01 X17.16336 Y-56.46890
G01 X17.18787 Y-56.43138
G01 X17.21853 Y-56.39803
G01 X17.25899 Y-56.36710
G01 X17.31932 Y-56.33885
G01 X17.38970 Y-56.32547
G01 X17.75503 Y-56.32501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X15.13913 Y-52.32499 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X15.13913 Y-52.32499
G01 X15.10317 Y-52.45021
G01 X15.02280 Y-52.58605
G01 X14.91114 Y-52.69774
G01 X14.77523 Y-52.77810
G01 X14.62301 Y-52.82232
G01 X14.21254 Y-52.82496
G01 X14.21254 Y-52.37490
G01 X14.54932 Y-52.37328
G01 X14.60566 Y-52.35529
G01 X14.64528 Y-52.32499
G01 X15.13913 Y-52.32499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X15.13913 Y-51.77498 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X15.13913 Y-51.77498
G01 X15.10317 Y-51.64976
G01 X15.02280 Y-51.51387
G01 X14.91114 Y-51.40221
G01 X14.77520 Y-51.32182
G01 X14.62301 Y-51.27760
G01 X14.21254 Y-51.27498
G01 X14.21254 Y-51.72507
G01 X14.54932 Y-51.72669
G01 X14.60566 Y-51.74468
G01 X14.64528 Y-51.77498
G01 X15.13913 Y-51.77498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X13.66253 Y-51.72507 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X13.66253 Y-51.72507
G01 X13.66253 Y-51.27498
G01 X13.28537 Y-51.27498
G01 X13.25204 Y-51.27760
G01 X13.09982 Y-51.32182
G01 X12.96393 Y-51.40218
G01 X12.85224 Y-51.51387
G01 X12.77190 Y-51.64976
G01 X12.73591 Y-51.77498
G01 X13.22974 Y-51.77498
G01 X13.26936 Y-51.74468
G01 X13.32570 Y-51.72669
G01 X13.66253 Y-51.72507
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X12.31336 Y-46.66221 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X12.31336 Y-46.66221
G01 X12.28448 Y-46.68322
G01 X12.09865 Y-46.77788
G01 X11.90030 Y-46.84232
G01 X11.69431 Y-46.87496
G01 X11.48575 Y-46.87496
G01 X11.27976 Y-46.84232
G01 X11.08141 Y-46.77788
G01 X10.89556 Y-46.68322
G01 X10.86668 Y-46.66224
G01 X11.19779 Y-46.33112
G01 X11.28153 Y-46.36877
G01 X11.38148 Y-46.39973
G01 X11.48146 Y-46.41820
G01 X11.58890 Y-46.42495
G01 X11.69337 Y-46.41883
G01 X11.79345 Y-46.40097
G01 X11.89360 Y-46.37060
G01 X11.98222 Y-46.33107
G01 X12.31336 Y-46.66221
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X12.31338 Y-44.43771 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X12.31338 Y-44.43771
G01 X12.28450 Y-44.41673
G01 X12.09865 Y-44.32206
G01 X11.90030 Y-44.25762
G01 X11.69431 Y-44.22498
G01 X11.48575 Y-44.22498
G01 X11.27976 Y-44.25762
G01 X11.08141 Y-44.32206
G01 X10.89558 Y-44.41673
G01 X10.86670 Y-44.43773
G01 X11.19782 Y-44.76885
G01 X11.27866 Y-44.73230
G01 X11.38148 Y-44.70024
G01 X11.48443 Y-44.68142
G01 X11.58890 Y-44.67504
G01 X11.69040 Y-44.68081
G01 X11.79637 Y-44.69971
G01 X11.89360 Y-44.72937
G01 X11.98219 Y-44.76890
G01 X12.31338 Y-44.43771
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X5.62551 Y-43.12397 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X5.62551 Y-43.12397
G01 X5.62551 Y-42.87599
G01 X5.58673 Y-42.63106
G01 X5.51010 Y-42.39519
G01 X5.39752 Y-42.17421
G01 X5.25175 Y-41.97363
G01 X5.07639 Y-41.79824
G01 X4.87578 Y-41.65247
G01 X4.65483 Y-41.53992
G01 X4.41896 Y-41.46329
G01 X4.17403 Y-41.42448
G01 X3.92602 Y-41.42448
G01 X3.68109 Y-41.46329
G01 X3.44523 Y-41.53992
G01 X3.22427 Y-41.65247
G01 X3.02366 Y-41.79824
G01 X2.84830 Y-41.97360
G01 X2.70253 Y-42.17421
G01 X2.58996 Y-42.39519
G01 X2.51333 Y-42.63106
G01 X2.47454 Y-42.87599
G01 X2.47454 Y-43.12397
G01 X2.51333 Y-43.36890
G01 X2.58996 Y-43.60476
G01 X2.70253 Y-43.82572
G01 X2.84830 Y-44.02633
G01 X3.02366 Y-44.20171
G01 X3.22427 Y-44.34746
G01 X3.44523 Y-44.46003
G01 X3.68109 Y-44.53666
G01 X3.92602 Y-44.57548
G01 X4.17403 Y-44.57548
G01 X4.41896 Y-44.53666
G01 X4.65483 Y-44.46003
G01 X4.87578 Y-44.34746
G01 X5.07639 Y-44.20171
G01 X5.25175 Y-44.02633
G01 X5.39752 Y-43.82572
G01 X5.51010 Y-43.60476
G01 X5.58673 Y-43.36890
G01 X5.62551 Y-43.12397
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-2.47447 Y-43.12397 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-2.47447 Y-43.12397
G01 X-2.47447 Y-42.87599
G01 X-2.51326 Y-42.63106
G01 X-2.58991 Y-42.39519
G01 X-2.70249 Y-42.17421
G01 X-2.84823 Y-41.97363
G01 X-3.02359 Y-41.79824
G01 X-3.22420 Y-41.65247
G01 X-3.44516 Y-41.53992
G01 X-3.68105 Y-41.46329
G01 X-3.92595 Y-41.42448
G01 X-4.17396 Y-41.42448
G01 X-4.41892 Y-41.46329
G01 X-4.65476 Y-41.53992
G01 X-4.87574 Y-41.65247
G01 X-5.07632 Y-41.79824
G01 X-5.25168 Y-41.97360
G01 X-5.39748 Y-42.17421
G01 X-5.51003 Y-42.39519
G01 X-5.58666 Y-42.63106
G01 X-5.62547 Y-42.87599
G01 X-5.62547 Y-43.12397
G01 X-5.58666 Y-43.36890
G01 X-5.51005 Y-43.60476
G01 X-5.39748 Y-43.82572
G01 X-5.25168 Y-44.02633
G01 X-5.07635 Y-44.20171
G01 X-4.87574 Y-44.34746
G01 X-4.65476 Y-44.46003
G01 X-4.41892 Y-44.53666
G01 X-4.17396 Y-44.57548
G01 X-3.92595 Y-44.57548
G01 X-3.68105 Y-44.53666
G01 X-3.44516 Y-44.46003
G01 X-3.22420 Y-44.34746
G01 X-3.02359 Y-44.20171
G01 X-2.84823 Y-44.02633
G01 X-2.70249 Y-43.82572
G01 X-2.66764 Y-43.75739
G01 X-2.58991 Y-43.60476
G01 X-2.51326 Y-43.36890
G01 X-2.47447 Y-43.12397
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-7.54728 Y-45.28152 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-7.54728 Y-45.28152
G01 X-7.54728 Y-45.07682
G01 X-7.57931 Y-44.87464
G01 X-7.64256 Y-44.67995
G01 X-7.73547 Y-44.49755
G01 X-7.85579 Y-44.33197
G01 X-8.00057 Y-44.18721
G01 X-8.16615 Y-44.06687
G01 X-8.34855 Y-43.97395
G01 X-8.54324 Y-43.91071
G01 X-8.74543 Y-43.87868
G01 X-8.95012 Y-43.87868
G01 X-9.15231 Y-43.91071
G01 X-9.34700 Y-43.97395
G01 X-9.52940 Y-44.06687
G01 X-9.69498 Y-44.18721
G01 X-9.83973 Y-44.33197
G01 X-9.96008 Y-44.49755
G01 X-10.05299 Y-44.67995
G01 X-10.11624 Y-44.87464
G01 X-10.14827 Y-45.07682
G01 X-10.14827 Y-45.28152
G01 X-10.13694 Y-45.35307
G01 X-10.11624 Y-45.48370
G01 X-10.05299 Y-45.67839
G01 X-9.96008 Y-45.86079
G01 X-9.83973 Y-46.02637
G01 X-9.69498 Y-46.17115
G01 X-9.52940 Y-46.29147
G01 X-9.34700 Y-46.38439
G01 X-9.15231 Y-46.44763
G01 X-8.95012 Y-46.47966
G01 X-8.74543 Y-46.47966
G01 X-8.54324 Y-46.44763
G01 X-8.34855 Y-46.38439
G01 X-8.16615 Y-46.29147
G01 X-8.00057 Y-46.17115
G01 X-7.85584 Y-46.02643
G01 X-7.73161 Y-45.85317
G01 X-7.64256 Y-45.67839
G01 X-7.57931 Y-45.48370
G01 X-7.54728 Y-45.28152
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-18.32499 Y-49.18748 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-18.32499 Y-49.18748
G01 X-18.32499 Y-48.81227
G01 X-18.33977 Y-48.69985
G01 X-18.39771 Y-48.56000
G01 X-18.48986 Y-48.43986
G01 X-18.61000 Y-48.34771
G01 X-18.74988 Y-48.28977
G01 X-18.77497 Y-48.28647
G01 X-18.77497 Y-49.18748
G01 X-18.32499 Y-49.18748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-19.22498 Y-49.18748 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-19.22498 Y-49.18748
G01 X-19.22498 Y-48.28647
G01 X-19.25079 Y-48.28987
G01 X-19.30563 Y-48.30641
G01 X-19.37510 Y-48.29894
G01 X-19.39986 Y-48.28977
G01 X-19.42496 Y-48.28647
G01 X-19.42496 Y-49.18748
G01 X-19.22498 Y-49.18748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-19.87497 Y-48.28647 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-19.87497 Y-48.28647
G01 X-19.87500 Y-49.18748
G01 X-20.07497 Y-49.18748
G01 X-20.07497 Y-48.28647
G01 X-20.04987 Y-48.28977
G01 X-20.02511 Y-48.29894
G01 X-19.95564 Y-48.30641
G01 X-19.90080 Y-48.28987
G01 X-19.87497 Y-48.28647
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-20.52498 Y-49.18748 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-20.52498 Y-49.18748
G01 X-20.52498 Y-48.28647
G01 X-20.55008 Y-48.28977
G01 X-20.68995 Y-48.34771
G01 X-20.81007 Y-48.43986
G01 X-20.90225 Y-48.56000
G01 X-20.96018 Y-48.69985
G01 X-20.97497 Y-48.81230
G01 X-20.97497 Y-49.18748
G01 X-20.52498 Y-49.18748
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-22.22498 Y-48.49868 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-22.22498 Y-48.49868
G01 X-22.22498 Y-48.31248
G01 X-22.67501 Y-48.31248
G01 X-22.67519 Y-48.46020
G01 X-22.69046 Y-48.54054
G01 X-22.71159 Y-48.58685
G01 X-22.73730 Y-48.62419
G01 X-22.76841 Y-48.65642
G01 X-22.80438 Y-48.68319
G01 X-22.87011 Y-48.71296
G01 X-22.93468 Y-48.72452
G01 X-23.32498 Y-48.72495
G01 X-23.32498 Y-49.17496
G01 X-22.90128 Y-49.17496
G01 X-22.80255 Y-49.16487
G01 X-22.64149 Y-49.11151
G01 X-22.49724 Y-49.02253
G01 X-22.37740 Y-48.90272
G01 X-22.28843 Y-48.75847
G01 X-22.23506 Y-48.59741
G01 X-22.22498 Y-48.49868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-22.22498 Y-47.76246 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-22.22498 Y-47.76246
G01 X-22.22498 Y-47.57628
G01 X-22.23506 Y-47.47755
G01 X-22.28843 Y-47.31649
G01 X-22.37740 Y-47.17224
G01 X-22.49724 Y-47.05241
G01 X-22.64149 Y-46.96343
G01 X-22.80255 Y-46.91007
G01 X-22.90128 Y-46.89998
G01 X-23.32498 Y-46.89998
G01 X-23.32498 Y-47.35002
G01 X-22.93468 Y-47.35045
G01 X-22.87011 Y-47.36201
G01 X-22.80438 Y-47.39180
G01 X-22.76841 Y-47.41855
G01 X-22.73730 Y-47.45081
G01 X-22.71159 Y-47.48814
G01 X-22.69046 Y-47.53445
G01 X-22.67519 Y-47.61476
G01 X-22.67501 Y-47.76246
G01 X-22.22498 Y-47.76246
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-23.87499 Y-47.35002 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-23.87499 Y-47.35002
G01 X-24.26531 Y-47.35045
G01 X-24.33569 Y-47.36386
G01 X-24.39602 Y-47.39211
G01 X-24.43645 Y-47.42302
G01 X-24.46714 Y-47.45637
G01 X-24.49165 Y-47.49391
G01 X-24.50973 Y-47.53491
G01 X-24.52477 Y-47.61476
G01 X-24.52495 Y-47.76246
G01 X-24.97496 Y-47.76246
G01 X-24.97496 Y-47.57628
G01 X-24.96488 Y-47.47755
G01 X-24.91151 Y-47.31649
G01 X-24.82253 Y-47.17224
G01 X-24.70272 Y-47.05241
G01 X-24.55848 Y-46.96343
G01 X-24.39739 Y-46.91007
G01 X-24.29868 Y-46.89998
G01 X-23.87499 Y-46.89998
G01 X-23.87499 Y-47.35002
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-23.87499 Y-49.17496 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-23.87499 Y-49.17496
G01 X-24.29866 Y-49.17496
G01 X-24.39739 Y-49.16487
G01 X-24.55848 Y-49.11151
G01 X-24.70272 Y-49.02253
G01 X-24.82253 Y-48.90272
G01 X-24.91151 Y-48.75847
G01 X-24.96488 Y-48.59741
G01 X-24.97496 Y-48.49868
G01 X-24.97496 Y-48.31248
G01 X-24.52495 Y-48.31248
G01 X-24.52477 Y-48.46020
G01 X-24.50973 Y-48.54006
G01 X-24.49165 Y-48.58108
G01 X-24.46714 Y-48.61860
G01 X-24.43645 Y-48.65195
G01 X-24.39602 Y-48.68288
G01 X-24.33569 Y-48.71110
G01 X-24.26531 Y-48.72452
G01 X-23.87499 Y-48.72495
G01 X-23.87499 Y-49.17496
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-22.17499 Y-55.89996 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-22.17499 Y-55.89996
G01 X-22.17499 Y-55.71378
G01 X-22.18507 Y-55.61505
G01 X-22.23844 Y-55.45399
G01 X-22.32742 Y-55.30974
G01 X-22.44723 Y-55.18991
G01 X-22.59147 Y-55.10093
G01 X-22.75254 Y-55.04757
G01 X-22.85127 Y-55.03748
G01 X-23.27496 Y-55.03748
G01 X-23.27496 Y-55.48752
G01 X-22.88467 Y-55.48795
G01 X-22.81428 Y-55.50136
G01 X-22.75396 Y-55.52961
G01 X-22.71352 Y-55.56052
G01 X-22.68284 Y-55.59387
G01 X-22.65833 Y-55.63141
G01 X-22.64024 Y-55.67241
G01 X-22.62521 Y-55.75226
G01 X-22.62503 Y-55.89996
G01 X-22.17499 Y-55.89996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-22.17499 Y-56.63618 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-22.17499 Y-56.63618
G01 X-22.17499 Y-56.44998
G01 X-22.62503 Y-56.44998
G01 X-22.62521 Y-56.59770
G01 X-22.64024 Y-56.67756
G01 X-22.65833 Y-56.71858
G01 X-22.68284 Y-56.75610
G01 X-22.71352 Y-56.78945
G01 X-22.75396 Y-56.82038
G01 X-22.82010 Y-56.85046
G01 X-22.88467 Y-56.86201
G01 X-23.27496 Y-56.86245
G01 X-23.27496 Y-57.31246
G01 X-22.85127 Y-57.31246
G01 X-22.75254 Y-57.30237
G01 X-22.59147 Y-57.24901
G01 X-22.44723 Y-57.16003
G01 X-22.32742 Y-57.04022
G01 X-22.23844 Y-56.89597
G01 X-22.18507 Y-56.73491
G01 X-22.17499 Y-56.63618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-8.69097 Y-75.22497 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-8.69097 Y-75.22497
G01 X-9.31248 Y-75.22497
G01 X-9.36755 Y-75.21905
G01 X-9.49595 Y-75.17117
G01 X-9.60529 Y-75.08928
G01 X-9.68716 Y-74.97996
G01 X-9.73504 Y-74.85154
G01 X-9.74098 Y-74.79650
G01 X-9.74098 Y-74.17499
G01 X-9.29099 Y-74.17499
G01 X-9.29099 Y-74.74999
G01 X-9.28678 Y-74.76388
G01 X-9.27987 Y-74.77077
G01 X-9.26600 Y-74.77498
G01 X-8.69097 Y-74.77498
G01 X-8.69097 Y-75.22497
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-7.09097 Y-74.79650 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-7.09097 Y-74.79650
G01 X-7.09689 Y-74.85154
G01 X-7.14477 Y-74.97996
G01 X-7.22666 Y-75.08928
G01 X-7.33598 Y-75.17117
G01 X-7.46440 Y-75.21905
G01 X-7.51947 Y-75.22497
G01 X-8.14096 Y-75.22497
G01 X-8.14096 Y-74.77498
G01 X-7.56598 Y-74.77498
G01 X-7.55643 Y-74.77308
G01 X-7.54520 Y-74.76388
G01 X-7.54098 Y-74.74999
G01 X-7.54098 Y-74.17499
G01 X-7.09097 Y-74.17499
G01 X-7.09097 Y-74.79650
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X0.00002 Y-67.50002 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X0.00002 Y-67.50002
G01 X0.10383 Y-67.50505
G01 X0.20566 Y-67.52013
G01 X0.30553 Y-67.54515
G01 X0.40246 Y-67.57985
G01 X0.49550 Y-67.62384
G01 X0.58382 Y-67.67678
G01 X0.66649 Y-67.73809
G01 X0.74277 Y-67.80723
G01 X0.81191 Y-67.88351
G01 X0.87322 Y-67.96618
G01 X0.92616 Y-68.05450
G01 X0.97018 Y-68.14757
G01 X1.00485 Y-68.24447
G01 X1.02987 Y-68.34434
G01 X1.04495 Y-68.44617
G01 X1.05001 Y-68.54901
G01 X1.05052 Y-89.99977
G01 X1.17002 Y-90.06548
G01 X1.25486 Y-90.12545
G01 X1.33332 Y-90.19352
G01 X1.40469 Y-90.26901
G01 X1.46824 Y-90.35118
G01 X1.52334 Y-90.43924
G01 X1.56946 Y-90.53231
G01 X1.60617 Y-90.62951
G01 X1.63306 Y-90.72984
G01 X1.64990 Y-90.83233
G01 X1.65653 Y-90.93601
G01 X1.65288 Y-91.03982
G01 X1.63896 Y-91.14277
G01 X1.61493 Y-91.24384
G01 X1.58102 Y-91.34201
G01 X1.53759 Y-91.43637
G01 X1.48501 Y-91.52598
G01 X1.42384 Y-91.60993
G01 X1.35465 Y-91.68742
G01 X1.27818 Y-91.75770
G01 X1.19509 Y-91.82006
G01 X1.10624 Y-91.87391
G01 X1.01252 Y-91.91869
G01 X0.91483 Y-91.95399
G01 X0.81412 Y-91.97947
G01 X0.71137 Y-91.99484
G01 X0.60762 Y-91.99999
G01 X0.00119 Y-91.99999
G01 X0.00094 Y-92.09936
G01 X53.14917 Y-92.09959
G01 X53.15000 Y-37.91288
G01 X52.74277 Y-38.30724
G01 X52.81191 Y-38.38351
G01 X52.87322 Y-38.46619
G01 X52.92615 Y-38.55448
G01 X52.97017 Y-38.64755
G01 X53.00484 Y-38.74447
G01 X53.02986 Y-38.84435
G01 X53.04495 Y-38.94618
G01 X53.05001 Y-39.04899
G01 X53.05001 Y-39.55760
G01 X53.04487 Y-39.66136
G01 X53.02948 Y-39.76408
G01 X53.00403 Y-39.86479
G01 X52.96872 Y-39.96251
G01 X52.92394 Y-40.05623
G01 X52.87010 Y-40.14506
G01 X52.80774 Y-40.22814
G01 X52.73746 Y-40.30464
G01 X52.65996 Y-40.37381
G01 X52.57599 Y-40.43500
G01 X52.48640 Y-40.48755
G01 X52.39204 Y-40.53101
G01 X52.29385 Y-40.56489
G01 X52.19278 Y-40.58892
G01 X52.08986 Y-40.60284
G01 X51.98602 Y-40.60650
G01 X51.88237 Y-40.59987
G01 X51.77985 Y-40.58303
G01 X51.67952 Y-40.55613
G01 X51.58234 Y-40.51943
G01 X51.48928 Y-40.47330
G01 X51.40121 Y-40.41821
G01 X51.31902 Y-40.35466
G01 X51.24353 Y-40.28331
G01 X51.17548 Y-40.20482
G01 X51.11552 Y-40.12001
G01 X51.04973 Y-40.00040
G01 X50.93680 Y-39.93878
G01 X50.85283 Y-39.88046
G01 X50.77495 Y-39.81427
G01 X50.70386 Y-39.74081
G01 X50.64028 Y-39.66078
G01 X50.58476 Y-39.57493
G01 X50.53789 Y-39.48410
G01 X50.50007 Y-39.38913
G01 X50.47168 Y-39.29093
G01 X50.45298 Y-39.19042
G01 X50.44414 Y-39.08857
G01 X50.44955 Y-38.93541
G01 X50.46556 Y-38.83444
G01 X50.49131 Y-38.73553
G01 X50.52659 Y-38.63957
G01 X50.57102 Y-38.54752
G01 X50.62420 Y-38.46022
G01 X50.68565 Y-38.37851
G01 X50.75473 Y-38.30317
G01 X50.83083 Y-38.23490
G01 X50.91320 Y-38.17437
G01 X51.00109 Y-38.12215
G01 X51.09362 Y-38.07874
G01 X51.18996 Y-38.04453
G01 X51.28915 Y-38.01986
G01 X51.39029 Y-38.00498
G01 X51.49240 Y-37.99997
G01 X52.00101 Y-37.99997
G01 X52.10383 Y-38.00503
G01 X52.20566 Y-38.02014
G01 X52.30553 Y-38.04516
G01 X52.40246 Y-38.07983
G01 X52.49550 Y-38.12385
G01 X52.58381 Y-38.17678
G01 X52.66649 Y-38.23810
G01 X52.74277 Y-38.30724
G01 X53.15000 Y-37.91288
G01 X-53.14915 Y-37.90038
G01 X-53.14960 Y-92.09916
G01 X0.00094 Y-92.09936
G01 X0.00119 Y-91.99999
G01 X-0.60760 Y-91.99999
G01 X-0.71136 Y-91.99484
G01 X-0.81410 Y-91.97947
G01 X-0.91481 Y-91.95399
G01 X-1.01250 Y-91.91869
G01 X-1.10622 Y-91.87391
G01 X-1.19507 Y-91.82006
G01 X-1.27813 Y-91.75770
G01 X-1.35464 Y-91.68742
G01 X-1.42383 Y-91.60993
G01 X-1.48499 Y-91.52598
G01 X-1.53754 Y-91.43637
G01 X-1.58100 Y-91.34201
G01 X-1.61491 Y-91.24384
G01 X-1.63894 Y-91.14277
G01 X-1.65283 Y-91.03982
G01 X-1.65649 Y-90.93601
G01 X-1.64989 Y-90.83233
G01 X-1.63299 Y-90.72984
G01 X-1.60612 Y-90.62951
G01 X-1.56944 Y-90.53231
G01 X-1.52332 Y-90.43924
G01 X-1.46820 Y-90.35118
G01 X-1.40467 Y-90.26901
G01 X-1.33330 Y-90.19352
G01 X-1.25484 Y-90.12545
G01 X-1.04999 Y-89.98712
G01 X-1.04999 Y-68.54901
G01 X-1.04493 Y-68.44617
G01 X-1.02982 Y-68.34434
G01 X-1.00483 Y-68.24447
G01 X-0.97013 Y-68.14757
G01 X-0.92611 Y-68.05450
G01 X-0.87320 Y-67.96618
G01 X-0.81186 Y-67.88351
G01 X-0.74275 Y-67.80723
G01 X-0.66647 Y-67.73809
G01 X-0.58377 Y-67.67678
G01 X-0.49548 Y-67.62384
G01 X-0.40242 Y-67.57985
G01 X-0.30549 Y-67.54515
G01 X-0.20564 Y-67.52013
G01 X-0.10381 Y-67.50505
G01 X0.00002 Y-67.50002
G01 X0.00002 Y-62.49993
G01 X-0.10381 Y-62.49495
G01 X-0.20564 Y-62.47983
G01 X-0.30549 Y-62.45482
G01 X-0.40242 Y-62.42014
G01 X-0.49548 Y-62.37613
G01 X-0.58377 Y-62.32319
G01 X-0.66647 Y-62.26188
G01 X-0.74275 Y-62.19274
G01 X-0.81186 Y-62.11646
G01 X-0.87320 Y-62.03378
G01 X-0.92611 Y-61.94549
G01 X-0.97013 Y-61.85243
G01 X-1.00483 Y-61.75550
G01 X-1.02982 Y-61.65563
G01 X-1.04493 Y-61.55380
G01 X-1.04999 Y-61.45098
G01 X-1.04999 Y-40.01285
G01 X-1.24717 Y-39.88046
G01 X-1.32504 Y-39.81427
G01 X-1.39614 Y-39.74081
G01 X-1.45974 Y-39.66078
G01 X-1.51524 Y-39.57493
G01 X-1.56210 Y-39.48410
G01 X-1.59992 Y-39.38913
G01 X-1.62832 Y-39.29093
G01 X-1.64704 Y-39.19042
G01 X-1.65585 Y-39.08857
G01 X-1.65042 Y-38.93541
G01 X-1.63444 Y-38.83444
G01 X-1.60869 Y-38.73553
G01 X-1.57341 Y-38.63957
G01 X-1.52898 Y-38.54752
G01 X-1.47579 Y-38.46022
G01 X-1.41438 Y-38.37851
G01 X-1.34526 Y-38.30317
G01 X-1.26919 Y-38.23490
G01 X-1.18679 Y-38.17437
G01 X-1.09891 Y-38.12215
G01 X-1.00638 Y-38.07874
G01 X-0.91003 Y-38.04453
G01 X-0.81085 Y-38.01986
G01 X-0.70970 Y-38.00498
G01 X-0.60760 Y-37.99997
G01 X-0.00115 Y-37.99997
G01 X-0.00092 Y-37.90660
G01 X-0.00115 Y-37.99997
G01 X0.60762 Y-37.99997
G01 X0.71137 Y-38.00513
G01 X0.81412 Y-38.02050
G01 X0.91483 Y-38.04597
G01 X1.01252 Y-38.08128
G01 X1.10624 Y-38.12606
G01 X1.19509 Y-38.17991
G01 X1.27818 Y-38.24227
G01 X1.35465 Y-38.31255
G01 X1.42384 Y-38.39004
G01 X1.48501 Y-38.47399
G01 X1.53759 Y-38.56360
G01 X1.58102 Y-38.65796
G01 X1.61493 Y-38.75613
G01 X1.63896 Y-38.85720
G01 X1.65288 Y-38.96015
G01 X1.65653 Y-39.06396
G01 X1.64990 Y-39.16764
G01 X1.63306 Y-39.27013
G01 X1.60617 Y-39.37048
G01 X1.56946 Y-39.46766
G01 X1.52334 Y-39.56073
G01 X1.46824 Y-39.64879
G01 X1.40469 Y-39.73096
G01 X1.33332 Y-39.80645
G01 X1.25486 Y-39.87452
G01 X1.17002 Y-39.93449
G01 X1.05052 Y-40.00020
G01 X1.05001 Y-61.45098
G01 X1.04495 Y-61.55380
G01 X1.02987 Y-61.65563
G01 X1.00485 Y-61.75550
G01 X0.97018 Y-61.85243
G01 X0.92616 Y-61.94549
G01 X0.87322 Y-62.03378
G01 X0.81191 Y-62.11646
G01 X0.74277 Y-62.19274
G01 X0.66649 Y-62.26188
G01 X0.58382 Y-62.32319
G01 X0.49550 Y-62.37613
G01 X0.40246 Y-62.42014
G01 X0.30553 Y-62.45482
G01 X0.20566 Y-62.47983
G01 X0.10383 Y-62.49495
G01 X0.00002 Y-62.49993
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X12.02502 Y-73.33752 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X12.02502 Y-73.33752
G01 X11.63470 Y-73.33795
G01 X11.57013 Y-73.34951
G01 X11.50439 Y-73.37930
G01 X11.46845 Y-73.40605
G01 X11.43731 Y-73.43831
G01 X11.41163 Y-73.47562
G01 X11.39047 Y-73.52195
G01 X11.37521 Y-73.60227
G01 X11.37503 Y-73.74997
G01 X10.92504 Y-73.74997
G01 X10.92504 Y-73.56376
G01 X10.93513 Y-73.46505
G01 X10.98849 Y-73.30397
G01 X11.07747 Y-73.15975
G01 X11.19728 Y-73.03991
G01 X11.34153 Y-72.95093
G01 X11.50262 Y-72.89757
G01 X11.60132 Y-72.88748
G01 X12.02502 Y-72.88748
G01 X12.02502 Y-73.33752
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X13.67503 Y-73.74997 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X13.67503 Y-73.74997
G01 X13.22499 Y-73.74997
G01 X13.22481 Y-73.60227
G01 X13.20955 Y-73.52195
G01 X13.18841 Y-73.47562
G01 X13.16271 Y-73.43831
G01 X13.13159 Y-73.40605
G01 X13.09563 Y-73.37930
G01 X13.02989 Y-73.34951
G01 X12.96533 Y-73.33795
G01 X12.57503 Y-73.33752
G01 X12.57503 Y-72.88748
G01 X12.99873 Y-72.88748
G01 X13.09746 Y-72.89757
G01 X13.25852 Y-72.95093
G01 X13.40276 Y-73.03991
G01 X13.52260 Y-73.15975
G01 X13.61155 Y-73.30399
G01 X13.66494 Y-73.46505
G01 X13.67503 Y-73.56376
G01 X13.67503 Y-73.74997
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X11.97503 Y-81.37502 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X11.97503 Y-81.37502
G01 X11.58468 Y-81.37545
G01 X11.52014 Y-81.38701
G01 X11.45441 Y-81.41680
G01 X11.41808 Y-81.44393
G01 X11.38321 Y-81.48102
G01 X11.35834 Y-81.51891
G01 X11.34026 Y-81.55991
G01 X11.32522 Y-81.63977
G01 X11.32504 Y-81.78747
G01 X10.87503 Y-81.78747
G01 X10.87503 Y-81.60126
G01 X10.88512 Y-81.50255
G01 X10.93848 Y-81.34147
G01 X11.02746 Y-81.19725
G01 X11.14729 Y-81.07741
G01 X11.29154 Y-80.98843
G01 X11.45260 Y-80.93507
G01 X11.55133 Y-80.92498
G01 X11.97503 Y-80.92498
G01 X11.97503 Y-81.37502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X13.62501 Y-81.78747 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X13.62501 Y-81.78747
G01 X13.17498 Y-81.78747
G01 X13.17480 Y-81.63977
G01 X13.15976 Y-81.55991
G01 X13.14168 Y-81.51891
G01 X13.11681 Y-81.48102
G01 X13.08194 Y-81.44393
G01 X13.04564 Y-81.41680
G01 X12.97988 Y-81.38701
G01 X12.91534 Y-81.37545
G01 X12.52504 Y-81.37502
G01 X12.52504 Y-80.92498
G01 X12.94874 Y-80.92498
G01 X13.04744 Y-80.93507
G01 X13.20853 Y-80.98843
G01 X13.35275 Y-81.07741
G01 X13.47259 Y-81.19725
G01 X13.56156 Y-81.34149
G01 X13.61493 Y-81.50255
G01 X13.62501 Y-81.60126
G01 X13.62501 Y-81.78747
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X13.62501 Y-82.52369 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X13.62501 Y-82.52369
G01 X13.61493 Y-82.62239
G01 X13.56156 Y-82.78345
G01 X13.47259 Y-82.92772
G01 X13.35275 Y-83.04754
G01 X13.20853 Y-83.13651
G01 X13.04744 Y-83.18988
G01 X12.94871 Y-83.19996
G01 X12.52504 Y-83.19996
G01 X12.52504 Y-82.74995
G01 X12.91534 Y-82.74952
G01 X12.97988 Y-82.73796
G01 X13.04564 Y-82.70819
G01 X13.08194 Y-82.68106
G01 X13.11681 Y-82.64398
G01 X13.14168 Y-82.60608
G01 X13.15976 Y-82.56506
G01 X13.17480 Y-82.48520
G01 X13.17498 Y-82.33748
G01 X13.62501 Y-82.33748
G01 X13.62501 Y-82.52369
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X11.97503 Y-83.19996 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X11.97503 Y-83.19996
G01 X11.55133 Y-83.19996
G01 X11.45260 Y-83.18988
G01 X11.29154 Y-83.13651
G01 X11.14729 Y-83.04754
G01 X11.02746 Y-82.92772
G01 X10.93848 Y-82.78348
G01 X10.88512 Y-82.62239
G01 X10.87503 Y-82.52369
G01 X10.87503 Y-82.33748
G01 X11.32504 Y-82.33748
G01 X11.32522 Y-82.48520
G01 X11.34026 Y-82.56506
G01 X11.35834 Y-82.60608
G01 X11.38321 Y-82.64398
G01 X11.41808 Y-82.68106
G01 X11.45441 Y-82.70819
G01 X11.52014 Y-82.73796
G01 X11.58468 Y-82.74952
G01 X11.97503 Y-82.74995
G01 X11.97503 Y-83.19996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X5.62551 Y-87.12396 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X5.62551 Y-87.12396
G01 X5.58673 Y-87.36891
G01 X5.51010 Y-87.60478
G01 X5.39752 Y-87.82573
G01 X5.25175 Y-88.02634
G01 X5.07639 Y-88.20170
G01 X4.87578 Y-88.34747
G01 X4.65483 Y-88.46005
G01 X4.41896 Y-88.53668
G01 X4.17403 Y-88.57546
G01 X3.92602 Y-88.57546
G01 X3.68109 Y-88.53668
G01 X3.44523 Y-88.46005
G01 X3.22427 Y-88.34747
G01 X3.02366 Y-88.20170
G01 X2.84830 Y-88.02634
G01 X2.70253 Y-87.82573
G01 X2.58996 Y-87.60478
G01 X2.51333 Y-87.36891
G01 X2.47454 Y-87.12396
G01 X2.47454 Y-86.87598
G01 X2.51333 Y-86.63104
G01 X2.58996 Y-86.39518
G01 X2.70253 Y-86.17422
G01 X2.84830 Y-85.97362
G01 X3.02366 Y-85.79823
G01 X3.22427 Y-85.65248
G01 X3.44523 Y-85.53991
G01 X3.68109 Y-85.46328
G01 X3.92602 Y-85.42449
G01 X4.17403 Y-85.42449
G01 X4.41896 Y-85.46328
G01 X4.65483 Y-85.53991
G01 X4.87578 Y-85.65248
G01 X5.07639 Y-85.79825
G01 X5.25175 Y-85.97362
G01 X5.39752 Y-86.17422
G01 X5.51010 Y-86.39518
G01 X5.58673 Y-86.63104
G01 X5.62551 Y-86.87598
G01 X5.62551 Y-87.12396
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-2.47447 Y-87.12396 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-2.47447 Y-87.12396
G01 X-2.51326 Y-87.36891
G01 X-2.58991 Y-87.60478
G01 X-2.70249 Y-87.82573
G01 X-2.84823 Y-88.02634
G01 X-3.02359 Y-88.20170
G01 X-3.22420 Y-88.34747
G01 X-3.44516 Y-88.46005
G01 X-3.68105 Y-88.53668
G01 X-3.92595 Y-88.57546
G01 X-4.17396 Y-88.57546
G01 X-4.41892 Y-88.53668
G01 X-4.65476 Y-88.46005
G01 X-4.87574 Y-88.34747
G01 X-5.07635 Y-88.20170
G01 X-5.25168 Y-88.02634
G01 X-5.39748 Y-87.82573
G01 X-5.51005 Y-87.60478
G01 X-5.58666 Y-87.36891
G01 X-5.62547 Y-87.12396
G01 X-5.62547 Y-86.87598
G01 X-5.58666 Y-86.63104
G01 X-5.51003 Y-86.39518
G01 X-5.39748 Y-86.17422
G01 X-5.25168 Y-85.97362
G01 X-5.07632 Y-85.79823
G01 X-4.87574 Y-85.65248
G01 X-4.65476 Y-85.53991
G01 X-4.41892 Y-85.46328
G01 X-4.17396 Y-85.42449
G01 X-3.92595 Y-85.42449
G01 X-3.68105 Y-85.46328
G01 X-3.44516 Y-85.53991
G01 X-3.22420 Y-85.65248
G01 X-3.02359 Y-85.79825
G01 X-2.84823 Y-85.97362
G01 X-2.70249 Y-86.17422
G01 X-2.58991 Y-86.39518
G01 X-2.51326 Y-86.63104
G01 X-2.47447 Y-86.87598
G01 X-2.47447 Y-87.12396
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-7.62348 Y-84.94974 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-7.62348 Y-84.94974
G01 X-7.65551 Y-85.15190
G01 X-7.71876 Y-85.34662
G01 X-7.81167 Y-85.52899
G01 X-7.93199 Y-85.69460
G01 X-8.07677 Y-85.83935
G01 X-8.24235 Y-85.95967
G01 X-8.42475 Y-86.05258
G01 X-8.52925 Y-86.08654
G01 X-8.61944 Y-86.11583
G01 X-8.82163 Y-86.14786
G01 X-9.02632 Y-86.14786
G01 X-9.22851 Y-86.11583
G01 X-9.42320 Y-86.05258
G01 X-9.60560 Y-85.95967
G01 X-9.77118 Y-85.83935
G01 X-9.91593 Y-85.69460
G01 X-10.03628 Y-85.52899
G01 X-10.12919 Y-85.34659
G01 X-10.19244 Y-85.15190
G01 X-10.22447 Y-84.94974
G01 X-10.22447 Y-84.74502
G01 X-10.19244 Y-84.54283
G01 X-10.12919 Y-84.34814
G01 X-10.03628 Y-84.16574
G01 X-9.91593 Y-84.00016
G01 X-9.77118 Y-83.85541
G01 X-9.60560 Y-83.73509
G01 X-9.42320 Y-83.64217
G01 X-9.22851 Y-83.57890
G01 X-9.02632 Y-83.54687
G01 X-8.82163 Y-83.54687
G01 X-8.61944 Y-83.57890
G01 X-8.42475 Y-83.64217
G01 X-8.24235 Y-83.73509
G01 X-8.07677 Y-83.85541
G01 X-7.93199 Y-84.00016
G01 X-7.81167 Y-84.16574
G01 X-7.71876 Y-84.34814
G01 X-7.65551 Y-84.54283
G01 X-7.62348 Y-84.74502
G01 X-7.62348 Y-84.94974
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-13.52510 Y-85.01964 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-13.52510 Y-85.01964
G01 X-13.80589 Y-85.07580
G01 X-13.80589 Y-85.06742
G01 X-13.78441 Y-85.02444
G01 X-13.74143 Y-85.00295
G01 X-13.55852 Y-85.00295
G01 X-13.52510 Y-85.01964
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-15.01664 Y-84.03567 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-15.01664 Y-84.03567
G01 X-15.01608 Y-85.43216
G01 X-14.96924 Y-85.52124
G01 X-14.90246 Y-85.69747
G01 X-14.88415 Y-85.75987
G01 X-14.86314 Y-85.89650
G01 X-14.83302 Y-86.17760
G01 X-14.70178 Y-86.17735
G01 X-14.47201 Y-86.18588
G01 X-14.38446 Y-86.18344
G01 X-14.29596 Y-86.17186
G01 X-14.13320 Y-86.13087
G01 X-14.05662 Y-86.15985
G01 X-13.76767 Y-86.30488
G01 X-13.61928 Y-86.39602
G01 X-13.56749 Y-86.43394
G01 X-13.11626 Y-86.80089
G01 X-13.09703 Y-86.83358
G01 X-12.81880 Y-87.06703
G01 X-12.65151 Y-86.90026
G01 X-12.42446 Y-86.62853
G01 X-12.30958 Y-86.45058
G01 X-12.22695 Y-86.28512
G01 X-12.20549 Y-86.23338
G01 X-12.14920 Y-86.05738
G01 X-12.13749 Y-86.00559
G01 X-12.11359 Y-85.82071
G01 X-12.11149 Y-85.39427
G01 X-12.02515 Y-85.25281
G01 X-11.96284 Y-85.11322
G01 X-11.92899 Y-84.99264
G01 X-11.91585 Y-84.90720
G01 X-11.91171 Y-84.82381
G01 X-11.91618 Y-84.74057
G01 X-11.92353 Y-84.68736
G01 X-11.94956 Y-84.57971
G01 X-11.96696 Y-84.52792
G01 X-12.00404 Y-84.43892
G01 X-12.06356 Y-84.32975
G01 X-12.15619 Y-84.19666
G01 X-12.30915 Y-84.18634
G01 X-12.47305 Y-84.18685
G01 X-12.58314 Y-84.19338
G01 X-12.73737 Y-84.18688
G01 X-12.91293 Y-84.20179
G01 X-13.05377 Y-84.23120
G01 X-13.10922 Y-84.24685
G01 X-13.32301 Y-84.20136
G01 X-13.46868 Y-84.18736
G01 X-13.83129 Y-84.18736
G01 X-14.00869 Y-84.20666
G01 X-14.12190 Y-84.12495
G01 X-14.26246 Y-84.04563
G01 X-14.36162 Y-84.00433
G01 X-14.42184 Y-83.98515
G01 X-14.50879 Y-83.96536
G01 X-14.61018 Y-83.95449
G01 X-14.66198 Y-83.95360
G01 X-14.74948 Y-83.95965
G01 X-14.80129 Y-83.96768
G01 X-14.89637 Y-83.99102
G01 X-15.01664 Y-84.03567
G01 X-15.09494 Y-84.00433
G01 X-15.18636 Y-83.97697
G01 X-15.27330 Y-83.96054
G01 X-15.39530 Y-83.95360
G01 X-15.48280 Y-83.95965
G01 X-15.53462 Y-83.96768
G01 X-15.62969 Y-83.99102
G01 X-15.68148 Y-84.00842
G01 X-15.79476 Y-84.05805
G01 X-15.84656 Y-84.08604
G01 X-16.02336 Y-84.20687
G01 X-16.20160 Y-84.18739
G01 X-16.47302 Y-84.18685
G01 X-16.61661 Y-84.19785
G01 X-16.78468 Y-84.22968
G01 X-16.93738 Y-84.19960
G01 X-17.10916 Y-84.18634
G01 X-17.27304 Y-84.18685
G01 X-17.38315 Y-84.19341
G01 X-17.53738 Y-84.18688
G01 X-17.68673 Y-84.19780
G01 X-17.81699 Y-84.10765
G01 X-17.86878 Y-84.07738
G01 X-17.98727 Y-84.02051
G01 X-18.03906 Y-84.00110
G01 X-18.13682 Y-83.97349
G01 X-18.18864 Y-83.96364
G01 X-18.27685 Y-83.95449
G01 X-18.32864 Y-83.95360
G01 X-18.41615 Y-83.95965
G01 X-18.46796 Y-83.96768
G01 X-18.55310 Y-83.98777
G01 X-18.68150 Y-84.03539
G01 X-18.82760 Y-84.11431
G01 X-18.95790 Y-84.20616
G01 X-19.13535 Y-84.18736
G01 X-19.40637 Y-84.18685
G01 X-19.48528 Y-84.19028
G01 X-19.62074 Y-84.18703
G01 X-19.75247 Y-84.19767
G01 X-19.87388 Y-84.21977
G01 X-20.00675 Y-84.25632
G01 X-20.21640 Y-84.20804
G01 X-20.37134 Y-84.18888
G01 X-20.67301 Y-84.18685
G01 X-20.81660 Y-84.19785
G01 X-20.85902 Y-84.20423
G01 X-20.96712 Y-84.44161
G01 X-21.08454 Y-84.63885
G01 X-21.19148 Y-84.78022
G01 X-21.26519 Y-84.86313
G01 X-21.48373 Y-85.05939
G01 X-21.36437 Y-85.18670
G01 X-21.28693 Y-85.29330
G01 X-21.24037 Y-85.37816
G01 X-21.20095 Y-85.48708
G01 X-21.16448 Y-85.63653
G01 X-21.15066 Y-85.73861
G01 X-21.15013 Y-86.29990
G01 X-21.09851 Y-86.35083
G01 X-21.48271 Y-86.92759
G01 X-21.48322 Y-88.35032
G01 X-21.61794 Y-88.39424
G01 X-21.73473 Y-88.41443
G01 X-21.83737 Y-88.41811
G01 X-21.91614 Y-88.41202
G01 X-22.04957 Y-88.38499
G01 X-22.04967 Y-88.01080
G01 X-22.05691 Y-87.93094
G01 X-22.07900 Y-87.84783
G01 X-22.12086 Y-87.75568
G01 X-22.15172 Y-87.70442
G01 X-22.21624 Y-87.61819
G01 X-22.21634 Y-87.47331
G01 X-22.16877 Y-87.41250
G01 X-22.12376 Y-87.34151
G01 X-22.08591 Y-87.26162
G01 X-22.06854 Y-87.20981
G01 X-22.06059 Y-87.17732
G01 X-22.05068 Y-87.09739
G01 X-22.05081 Y-86.91471
G01 X-21.98586 Y-86.91126
G01 X-21.70877 Y-86.91141
G01 X-21.56039 Y-86.91766
G01 X-21.48271 Y-86.92759
G01 X-21.56039 Y-86.91766
G01 X-21.70877 Y-86.91141
G01 X-21.98586 Y-86.91126
G01 X-22.05081 Y-86.91471
G01 X-22.24964 Y-86.71316
G01 X-22.24791 Y-86.61954
G01 X-22.22035 Y-86.33201
G01 X-22.21649 Y-86.22444
G01 X-22.46199 Y-86.07367
G01 X-22.57121 Y-86.01674
G01 X-22.86173 Y-85.89640
G01 X-23.03750 Y-85.83287
G01 X-23.13171 Y-85.80361
G01 X-23.22419 Y-85.93933
G01 X-23.38680 Y-86.22068
G01 X-23.90852 Y-86.47140
G01 X-23.86272 Y-86.96978
G01 X-23.85248 Y-87.04204
G01 X-23.82510 Y-87.17702
G01 X-23.81682 Y-87.26929
G01 X-23.81664 Y-88.35037
G01 X-23.95129 Y-88.39424
G01 X-24.06808 Y-88.41443
G01 X-24.12924 Y-88.41811
G01 X-24.62670 Y-88.41864
G01 X-24.73600 Y-88.40937
G01 X-24.79759 Y-88.39855
G01 X-24.95677 Y-88.36114
G01 X-25.04859 Y-88.33472
G01 X-25.07105 Y-88.10612
G01 X-25.08001 Y-88.04453
G01 X-25.10861 Y-87.90749
G01 X-25.11646 Y-87.82324
G01 X-25.11664 Y-87.67983
G01 X-25.10887 Y-87.58420
G01 X-25.05291 Y-87.34491
G01 X-25.07465 Y-87.25212
G01 X-25.08210 Y-87.18266
G01 X-25.08233 Y-87.11425
G01 X-25.07552 Y-87.04562
G01 X-25.05634 Y-86.95807
G01 X-25.04001 Y-86.90656
G01 X-25.00097 Y-86.81590
G01 X-24.95555 Y-86.73338
G01 X-24.76836 Y-86.42347
G01 X-25.11329 Y-86.11347
G01 X-25.09985 Y-85.99388
G01 X-25.07374 Y-85.82462
G01 X-25.05700 Y-85.64405
G01 X-25.05525 Y-85.59541
G01 X-25.05987 Y-85.50189
G01 X-25.12070 Y-85.07179
G01 X-25.14191 Y-84.99175
G01 X-25.19594 Y-84.84436
G01 X-25.23264 Y-84.69310
G01 X-25.24737 Y-84.59234
G01 X-25.28105 Y-84.23831
G01 X-25.36874 Y-84.21764
G01 X-25.50275 Y-84.19516
G01 X-25.63909 Y-84.18634
G01 X-25.92860 Y-84.18888
G01 X-26.02662 Y-84.19866
G01 X-26.12921 Y-84.21672
G01 X-26.25522 Y-84.12495
G01 X-26.36462 Y-84.06112
G01 X-26.46378 Y-84.01599
G01 X-26.58636 Y-83.97697
G01 X-26.67331 Y-83.96054
G01 X-26.79530 Y-83.95360
G01 X-26.88280 Y-83.95965
G01 X-26.93462 Y-83.96768
G01 X-27.04996 Y-83.99783
G01 X-27.04996 Y-84.34855
G01 X-27.05855 Y-84.45292
G01 X-27.08570 Y-84.55320
G01 X-27.10714 Y-84.60496
G01 X-27.14051 Y-84.66887
G01 X-27.19886 Y-84.75805
G01 X-27.16347 Y-84.88627
G01 X-27.15293 Y-84.96206
G01 X-27.15027 Y-85.01385
G01 X-27.15276 Y-85.08759
G01 X-27.17310 Y-85.21017
G01 X-27.21026 Y-85.32320
G01 X-27.22827 Y-85.36473
G01 X-27.28024 Y-85.46231
G01 X-27.38204 Y-85.61128
G01 X-27.37465 Y-85.69851
G01 X-27.33828 Y-85.96597
G01 X-27.31057 Y-86.46251
G01 X-27.41961 Y-86.66569
G01 X-27.57180 Y-86.90889
G01 X-27.41961 Y-86.66569
G01 X-27.31057 Y-86.46251
G01 X-27.04811 Y-86.35802
G01 X-26.92494 Y-86.31408
G01 X-26.83421 Y-86.28611
G01 X-26.23907 Y-86.12350
G01 X-26.16304 Y-86.15495
G01 X-26.10117 Y-86.18593
G01 X-25.88382 Y-86.31293
G01 X-25.73254 Y-86.24481
G01 X-25.65184 Y-86.21842
G01 X-25.48649 Y-86.17262
G01 X-25.39962 Y-86.15106
G01 X-25.30917 Y-86.13463
G01 X-25.11329 Y-86.11347
G01 X-24.76836 Y-86.42347
G01 X-24.58946 Y-86.41705
G01 X-24.42876 Y-86.40011
G01 X-24.38446 Y-86.39195
G01 X-24.03204 Y-86.45449
G01 X-23.90852 Y-86.47140
G01 X-23.38680 Y-86.22068
G01 X-23.22419 Y-85.93933
G01 X-23.13171 Y-85.80361
G01 X-23.13503 Y-85.67080
G01 X-23.12990 Y-85.34400
G01 X-23.11758 Y-85.18086
G01 X-23.08942 Y-84.96211
G01 X-23.06818 Y-84.68817
G01 X-23.07395 Y-84.47382
G01 X-23.07900 Y-84.41952
G01 X-22.98362 Y-84.35531
G01 X-22.80260 Y-84.24253
G01 X-22.70008 Y-84.18538
G01 X-22.60257 Y-84.13968
G01 X-22.34822 Y-84.03707
G01 X-22.28347 Y-84.01746
G01 X-22.20138 Y-83.99932
G01 X-21.96092 Y-83.96079
G01 X-21.88363 Y-83.95426
G01 X-21.66285 Y-83.95485
G01 X-21.37573 Y-83.99747
G01 X-21.25066 Y-84.02671
G01 X-21.16389 Y-84.05708
G01 X-21.05952 Y-84.10014
G01 X-20.93517 Y-84.16077
G01 X-20.85902 Y-84.20423
G01 X-20.67301 Y-84.18685
G01 X-20.37134 Y-84.18888
G01 X-20.21640 Y-84.20804
G01 X-20.00675 Y-84.25632
G01 X-19.96682 Y-84.63636
G01 X-19.92968 Y-84.82561
G01 X-19.89775 Y-84.96076
G01 X-19.88543 Y-85.04768
G01 X-19.88383 Y-85.51266
G01 X-19.89473 Y-85.60712
G01 X-19.93296 Y-85.76932
G01 X-19.96390 Y-85.92563
G01 X-19.97665 Y-86.01105
G01 X-20.00095 Y-86.28014
G01 X-20.01563 Y-86.51497
G01 X-19.81500 Y-86.66424
G01 X-19.79219 Y-86.76168
G01 X-19.75493 Y-86.89294
G01 X-19.61005 Y-87.34389
G01 X-19.69453 Y-87.59373
G01 X-19.70705 Y-87.64481
G01 X-19.74289 Y-87.87054
G01 X-19.74998 Y-88.02474
G01 X-19.86372 Y-88.12792
G01 X-19.99745 Y-88.23010
G01 X-20.14357 Y-88.31651
G01 X-20.18508 Y-88.33627
G01 X-20.31345 Y-88.38387
G01 X-20.43098 Y-88.40965
G01 X-20.52386 Y-88.41816
G01 X-20.60725 Y-88.41654
G01 X-20.66892 Y-88.40965
G01 X-20.78645 Y-88.38387
G01 X-20.84995 Y-88.36330
G01 X-20.95127 Y-88.39424
G01 X-21.03687 Y-88.41069
G01 X-21.12922 Y-88.41811
G01 X-21.23184 Y-88.41443
G01 X-21.36829 Y-88.38898
G01 X-21.48322 Y-88.35032
G01 X-21.61794 Y-88.39424
G01 X-21.73473 Y-88.41443
G01 X-21.83737 Y-88.41811
G01 X-21.91614 Y-88.41202
G01 X-22.04957 Y-88.38499
G01 X-22.14212 Y-88.40627
G01 X-22.22602 Y-88.41654
G01 X-22.43897 Y-88.41814
G01 X-22.54476 Y-88.40828
G01 X-22.75678 Y-88.36114
G01 X-22.89749 Y-88.31641
G01 X-22.99640 Y-88.27191
G01 X-23.09864 Y-88.32738
G01 X-23.20529 Y-88.37071
G01 X-23.32282 Y-88.40249
G01 X-23.45721 Y-88.41816
G01 X-23.54060 Y-88.41654
G01 X-23.64377 Y-88.40249
G01 X-23.71979 Y-88.38387
G01 X-23.81664 Y-88.35037
G01 X-23.95129 Y-88.39424
G01 X-24.06808 Y-88.41443
G01 X-24.12924 Y-88.41811
G01 X-24.62670 Y-88.41864
G01 X-24.73600 Y-88.40937
G01 X-24.79759 Y-88.39855
G01 X-24.95677 Y-88.36114
G01 X-25.04859 Y-88.33472
G01 X-25.16874 Y-88.38047
G01 X-25.21024 Y-88.39210
G01 X-25.32599 Y-88.41331
G01 X-25.43739 Y-88.41811
G01 X-25.54882 Y-88.40760
G01 X-25.66454 Y-88.38047
G01 X-25.78951 Y-88.33261
G01 X-25.88298 Y-88.28438
G01 X-25.95060 Y-88.32002
G01 X-26.03046 Y-88.35565
G01 X-26.13162 Y-88.38898
G01 X-26.23688 Y-88.41069
G01 X-26.37071 Y-88.41811
G01 X-26.46304 Y-88.41069
G01 X-26.56830 Y-88.38898
G01 X-26.66947 Y-88.35565
G01 X-26.74933 Y-88.32002
G01 X-26.90152 Y-88.23074
G01 X-27.06627 Y-88.10234
G01 X-27.16203 Y-88.01278
G01 X-27.57178 Y-87.60303
G01 X-27.57180 Y-86.90889
G01 X-27.76543 Y-86.76178
G01 X-27.99502 Y-86.55675
G01 X-28.02512 Y-86.52558
G01 X-28.12608 Y-86.41029
G01 X-28.21669 Y-86.28583
G01 X-28.28039 Y-86.17666
G01 X-28.32540 Y-86.07770
G01 X-28.36436 Y-85.95533
G01 X-28.37841 Y-85.88182
G01 X-28.38829 Y-85.76927
G01 X-28.38829 Y-84.34845
G01 X-28.38374 Y-84.27390
G01 X-28.37048 Y-84.18949
G01 X-28.35359 Y-84.12292
G01 X-28.31836 Y-84.02206
G01 X-28.27163 Y-84.00433
G01 X-28.16012 Y-83.97255
G01 X-28.02667 Y-83.95470
G01 X-27.29538 Y-83.95355
G01 X-27.16530 Y-83.96768
G01 X-27.04996 Y-83.99783
G01 X-26.93462 Y-83.96768
G01 X-26.88280 Y-83.95965
G01 X-26.79530 Y-83.95360
G01 X-26.67331 Y-83.96054
G01 X-26.55517 Y-83.98515
G01 X-26.46378 Y-84.01599
G01 X-26.39578 Y-84.04563
G01 X-26.25522 Y-84.12495
G01 X-26.12921 Y-84.21672
G01 X-26.19408 Y-84.33760
G01 X-26.27696 Y-84.47931
G01 X-26.31806 Y-84.56755
G01 X-26.36754 Y-84.69114
G01 X-26.39098 Y-84.76445
G01 X-26.43137 Y-84.93313
G01 X-26.44549 Y-85.01743
G01 X-26.44956 Y-85.07148
G01 X-26.44996 Y-85.45304
G01 X-26.34763 Y-85.63064
G01 X-26.30673 Y-85.72978
G01 X-26.26624 Y-85.89533
G01 X-26.23907 Y-86.12350
G01 X-26.26624 Y-85.89533
G01 X-26.30673 Y-85.72978
G01 X-26.34763 Y-85.63064
G01 X-26.44996 Y-85.45304
G01 X-26.44956 Y-85.07148
G01 X-26.44549 Y-85.01743
G01 X-26.43137 Y-84.93313
G01 X-26.39098 Y-84.76445
G01 X-26.36754 Y-84.69114
G01 X-26.31806 Y-84.56755
G01 X-26.27696 Y-84.47931
G01 X-26.19408 Y-84.33760
G01 X-26.12921 Y-84.21672
G01 X-26.02662 Y-84.19866
G01 X-25.92860 Y-84.18888
G01 X-25.63909 Y-84.18634
G01 X-25.50275 Y-84.19516
G01 X-25.36874 Y-84.21764
G01 X-25.28105 Y-84.23831
G01 X-25.23876 Y-84.22709
G01 X-25.07483 Y-84.19650
G01 X-24.95766 Y-84.18713
G01 X-24.82594 Y-84.18970
G01 X-24.66170 Y-84.21190
G01 X-24.53529 Y-84.24365
G01 X-24.38329 Y-84.29752
G01 X-24.26084 Y-84.25254
G01 X-24.11921 Y-84.21484
G01 X-24.01591 Y-84.19724
G01 X-23.88385 Y-84.18693
G01 X-23.72205 Y-84.19287
G01 X-23.58809 Y-84.21329
G01 X-23.48009 Y-84.23999
G01 X-23.27070 Y-84.31807
G01 X-23.07900 Y-84.41952
G01 X-23.07395 Y-84.47382
G01 X-23.06818 Y-84.68817
G01 X-23.08942 Y-84.96211
G01 X-23.11758 Y-85.18086
G01 X-23.12990 Y-85.34400
G01 X-23.13503 Y-85.67080
G01 X-23.13171 Y-85.80361
G01 X-23.03750 Y-85.83287
G01 X-22.86173 Y-85.89640
G01 X-22.57121 Y-86.01674
G01 X-22.46199 Y-86.07367
G01 X-22.21649 Y-86.22444
G01 X-22.10773 Y-86.20288
G01 X-22.03298 Y-86.19416
G01 X-21.85142 Y-86.18555
G01 X-21.76427 Y-86.18748
G01 X-21.56646 Y-86.20930
G01 X-21.48375 Y-86.22320
G01 X-21.15013 Y-86.29990
G01 X-21.09851 Y-86.35083
G01 X-21.05152 Y-86.36478
G01 X-20.95183 Y-86.38515
G01 X-20.83283 Y-86.40646
G01 X-20.56699 Y-86.43206
G01 X-20.32595 Y-86.47646
G01 X-20.01563 Y-86.51497
G01 X-19.81500 Y-86.66424
G01 X-19.79219 Y-86.76168
G01 X-19.75493 Y-86.89294
G01 X-19.61005 Y-87.34389
G01 X-19.69453 Y-87.59373
G01 X-19.70705 Y-87.64481
G01 X-19.74289 Y-87.87054
G01 X-19.74998 Y-88.02474
G01 X-19.59295 Y-88.16289
G01 X-19.44099 Y-88.26929
G01 X-19.29588 Y-88.34483
G01 X-19.20418 Y-88.37874
G01 X-19.11714 Y-88.40135
G01 X-19.03382 Y-88.41423
G01 X-18.96032 Y-88.41864
G01 X-18.02603 Y-88.41654
G01 X-17.92283 Y-88.40249
G01 X-17.84681 Y-88.38387
G01 X-17.80530 Y-88.37071
G01 X-17.68645 Y-88.32106
G01 X-17.55742 Y-88.36099
G01 X-17.40838 Y-88.39619
G01 X-17.33192 Y-88.41019
G01 X-17.25143 Y-88.41730
G01 X-17.08798 Y-88.41880
G01 X-16.99083 Y-88.41288
G01 X-16.91209 Y-88.40033
G01 X-16.72336 Y-88.35581
G01 X-16.65245 Y-88.33488
G01 X-16.59850 Y-88.35733
G01 X-16.50675 Y-88.38778
G01 X-16.41976 Y-88.40709
G01 X-16.33642 Y-88.41684
G01 X-15.41676 Y-88.41882
G01 X-15.35936 Y-88.41654
G01 X-15.25616 Y-88.40249
G01 X-15.13863 Y-88.37071
G01 X-15.04770 Y-88.33434
G01 X-14.96716 Y-88.35852
G01 X-14.79820 Y-88.39840
G01 X-14.70452 Y-88.41364
G01 X-14.63795 Y-88.41814
G01 X-14.35116 Y-88.41882
G01 X-14.29431 Y-88.41666
G01 X-14.19441 Y-88.40348
G01 X-13.98753 Y-88.35520
G01 X-13.89116 Y-88.32433
G01 X-13.76764 Y-88.27483
G01 X-13.69157 Y-88.24011
G01 X-13.56464 Y-88.17097
G01 X-13.40546 Y-88.07237
G01 X-13.23907 Y-87.95426
G01 X-13.02601 Y-87.76625
G01 X-12.79548 Y-87.53572
G01 X-12.79548 Y-87.39264
G01 X-12.81880 Y-87.06703
G01 X-13.09703 Y-86.83358
G01 X-13.11626 Y-86.80089
G01 X-13.11661 Y-86.55891
G01 X-13.10650 Y-86.31596
G01 X-13.04974 Y-85.69899
G01 X-13.05807 Y-85.58593
G01 X-13.07351 Y-85.51385
G01 X-13.09091 Y-85.45700
G01 X-13.05215 Y-85.36465
G01 X-13.03655 Y-85.31255
G01 X-13.02563 Y-85.26259
G01 X-13.01710 Y-85.17981
G01 X-13.01717 Y-85.00549
G01 X-13.02055 Y-84.96082
G01 X-13.05319 Y-84.79376
G01 X-13.06645 Y-84.69887
G01 X-13.10922 Y-84.24685
G01 X-13.32301 Y-84.20136
G01 X-13.46868 Y-84.18736
G01 X-13.83129 Y-84.18736
G01 X-14.00869 Y-84.20666
G01 X-14.08159 Y-84.33763
G01 X-14.17135 Y-84.48680
G01 X-14.19408 Y-84.53029
G01 X-14.23312 Y-84.62162
G01 X-14.26345 Y-84.71939
G01 X-14.30074 Y-84.87860
G01 X-14.31306 Y-84.95690
G01 X-14.31628 Y-85.00496
G01 X-14.31656 Y-85.45299
G01 X-14.28194 Y-85.51271
G01 X-14.25080 Y-85.57811
G01 X-14.18867 Y-85.73432
G01 X-14.17330 Y-85.80618
G01 X-14.13320 Y-86.13087
G01 X-14.29596 Y-86.17186
G01 X-14.38446 Y-86.18344
G01 X-14.47201 Y-86.18588
G01 X-14.70178 Y-86.17735
G01 X-14.83302 Y-86.17760
G01 X-15.08389 Y-86.32911
G01 X-15.34125 Y-86.22901
G01 X-15.53401 Y-86.13943
G01 X-15.71762 Y-86.06561
G01 X-15.70150 Y-85.83704
G01 X-15.69802 Y-85.66511
G01 X-15.68331 Y-85.51266
G01 X-15.68298 Y-85.08243
G01 X-15.69088 Y-84.99737
G01 X-15.73734 Y-84.79158
G01 X-15.77467 Y-84.67982
G01 X-15.82260 Y-84.56600
G01 X-15.86947 Y-84.47494
G01 X-15.94612 Y-84.34880
G01 X-16.02336 Y-84.20687
G01 X-16.20160 Y-84.18739
G01 X-16.47302 Y-84.18685
G01 X-16.61661 Y-84.19785
G01 X-16.78468 Y-84.22968
G01 X-16.79669 Y-84.43473
G01 X-16.82532 Y-84.66973
G01 X-16.84305 Y-84.75213
G01 X-16.87515 Y-84.86600
G01 X-16.89342 Y-84.91271
G01 X-16.91590 Y-84.95632
G01 X-16.99685 Y-85.07936
G01 X-17.06075 Y-85.16407
G01 X-17.11643 Y-85.22543
G01 X-17.11597 Y-85.51311
G01 X-17.10284 Y-85.63712
G01 X-17.06736 Y-85.79960
G01 X-17.02852 Y-86.04839
G01 X-16.54996 Y-86.30148
G01 X-16.55052 Y-86.53638
G01 X-16.54546 Y-86.66178
G01 X-16.52816 Y-86.76165
G01 X-16.50510 Y-86.85436
G01 X-16.46974 Y-86.94367
G01 X-16.43642 Y-87.00419
G01 X-16.31816 Y-87.16630
G01 X-16.24211 Y-87.25332
G01 X-16.34894 Y-87.51006
G01 X-16.38011 Y-87.57194
G01 X-16.52026 Y-87.82022
G01 X-16.57701 Y-87.94384
G01 X-16.59994 Y-88.02108
G01 X-16.62702 Y-88.14280
G01 X-16.64439 Y-88.25271
G01 X-16.65245 Y-88.33488
G01 X-16.72336 Y-88.35581
G01 X-16.91209 Y-88.40033
G01 X-16.99083 Y-88.41288
G01 X-17.08798 Y-88.41880
G01 X-17.25143 Y-88.41730
G01 X-17.33192 Y-88.41019
G01 X-17.40838 Y-88.39619
G01 X-17.55742 Y-88.36099
G01 X-17.68645 Y-88.32106
G01 X-17.70297 Y-88.17643
G01 X-17.74221 Y-87.99205
G01 X-17.76611 Y-87.91938
G01 X-17.80759 Y-87.82334
G01 X-17.84106 Y-87.75857
G01 X-17.89011 Y-87.68512
G01 X-17.95120 Y-87.61153
G01 X-17.93621 Y-87.55723
G01 X-17.87073 Y-87.37153
G01 X-17.85717 Y-87.30943
G01 X-17.82816 Y-87.12749
G01 X-17.80911 Y-87.04417
G01 X-17.78414 Y-86.83457
G01 X-17.78298 Y-86.29901
G01 X-17.74960 Y-86.27753
G01 X-17.74935 Y-85.82546
G01 X-17.75387 Y-85.69937
G01 X-17.76738 Y-85.63186
G01 X-17.80556 Y-85.53125
G01 X-17.84924 Y-85.45507
G01 X-17.91655 Y-85.36447
G01 X-17.91658 Y-85.21921
G01 X-17.86888 Y-85.15833
G01 X-17.82387 Y-85.08743
G01 X-17.78602 Y-85.00763
G01 X-17.76065 Y-84.92338
G01 X-17.75262 Y-84.87156
G01 X-17.74983 Y-84.80481
G01 X-17.74919 Y-84.30481
G01 X-17.68673 Y-84.19780
G01 X-17.81699 Y-84.10765
G01 X-17.86878 Y-84.07738
G01 X-17.98727 Y-84.02051
G01 X-18.03906 Y-84.00110
G01 X-18.13682 Y-83.97349
G01 X-18.18864 Y-83.96364
G01 X-18.27685 Y-83.95449
G01 X-18.32864 Y-83.95360
G01 X-18.41615 Y-83.95965
G01 X-18.46796 Y-83.96768
G01 X-18.55310 Y-83.98777
G01 X-18.68150 Y-84.03539
G01 X-18.82760 Y-84.11431
G01 X-18.95790 Y-84.20616
G01 X-18.83857 Y-84.41477
G01 X-18.79384 Y-84.77400
G01 X-18.77873 Y-84.84629
G01 X-18.76034 Y-84.90100
G01 X-18.70898 Y-85.02246
G01 X-18.67939 Y-85.08312
G01 X-18.65054 Y-85.13140
G01 X-18.64815 Y-85.60725
G01 X-18.63672 Y-85.69015
G01 X-18.60820 Y-85.83130
G01 X-18.58401 Y-86.09244
G01 X-18.69161 Y-86.13620
G01 X-18.95099 Y-86.22459
G01 X-19.01731 Y-86.24049
G01 X-19.28325 Y-86.28748
G01 X-19.81500 Y-86.66424
G01 X-19.28325 Y-86.28748
G01 X-19.01731 Y-86.24049
G01 X-18.95099 Y-86.22459
G01 X-18.69161 Y-86.13620
G01 X-18.58401 Y-86.09244
G01 X-18.46763 Y-86.12746
G01 X-17.78298 Y-86.29901
G01 X-17.74960 Y-86.27753
G01 X-17.55910 Y-86.24164
G01 X-17.42374 Y-86.20559
G01 X-17.21351 Y-86.13303
G01 X-17.14361 Y-86.10465
G01 X-17.02852 Y-86.04839
G01 X-16.54996 Y-86.30148
G01 X-16.38915 Y-86.25060
G01 X-15.87985 Y-86.12226
G01 X-15.76936 Y-86.08672
G01 X-15.71762 Y-86.06561
G01 X-15.53401 Y-86.13943
G01 X-15.34125 Y-86.22901
G01 X-15.08389 Y-86.32911
G01 X-14.83302 Y-86.17760
G01 X-15.08389 Y-86.32911
G01 X-15.08440 Y-86.52228
G01 X-15.09596 Y-86.71743
G01 X-15.13365 Y-87.04433
G01 X-15.17406 Y-87.20371
G01 X-15.20432 Y-87.37143
G01 X-15.22695 Y-87.44217
G01 X-15.29776 Y-87.61494
G01 X-15.22334 Y-87.73198
G01 X-15.14305 Y-87.89439
G01 X-15.11798 Y-87.95601
G01 X-15.06850 Y-88.16109
G01 X-15.04770 Y-88.33434
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-14.26071 Y-87.70424 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-14.26071 Y-87.70424
G01 X-14.26071 Y-87.45469
G01 X-14.29576 Y-87.38456
G01 X-14.32174 Y-87.35858
G01 X-14.39187 Y-87.32352
G01 X-14.57475 Y-87.32352
G01 X-14.64488 Y-87.35858
G01 X-14.67084 Y-87.38453
G01 X-14.70589 Y-87.45466
G01 X-14.70589 Y-87.70424
G01 X-14.67084 Y-87.77437
G01 X-14.64491 Y-87.80031
G01 X-14.57475 Y-87.83538
G01 X-14.39187 Y-87.83538
G01 X-14.32172 Y-87.80031
G01 X-14.29576 Y-87.77437
G01 X-14.26071 Y-87.70424
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-16.16070 Y-85.45032 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-16.16070 Y-85.45032
G01 X-16.16070 Y-85.13409
G01 X-16.19575 Y-85.06396
G01 X-16.22171 Y-85.03801
G01 X-16.29184 Y-85.00295
G01 X-16.40810 Y-85.00295
G01 X-16.47823 Y-85.03801
G01 X-16.50419 Y-85.06396
G01 X-16.53924 Y-85.13409
G01 X-16.53924 Y-85.45032
G01 X-16.50419 Y-85.52045
G01 X-16.47823 Y-85.54639
G01 X-16.40807 Y-85.58146
G01 X-16.29187 Y-85.58146
G01 X-16.22171 Y-85.54639
G01 X-16.19575 Y-85.52045
G01 X-16.16070 Y-85.45032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-16.92738 Y-87.45764 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-16.92738 Y-87.45764
G01 X-16.98402 Y-87.68420
G01 X-17.02910 Y-87.77437
G01 X-17.05504 Y-87.80031
G01 X-17.12519 Y-87.83538
G01 X-17.17475 Y-87.83538
G01 X-17.24490 Y-87.80031
G01 X-17.27083 Y-87.77437
G01 X-17.31592 Y-87.68420
G01 X-17.37256 Y-87.45764
G01 X-17.37256 Y-87.16795
G01 X-17.31592 Y-86.94138
G01 X-17.27083 Y-86.85121
G01 X-17.24490 Y-86.82528
G01 X-17.17475 Y-86.79020
G01 X-17.12519 Y-86.79020
G01 X-17.05504 Y-86.82528
G01 X-17.02910 Y-86.85121
G01 X-16.98402 Y-86.94138
G01 X-16.92738 Y-87.16795
G01 X-16.92738 Y-87.45764
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-20.36072 Y-85.45032 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-20.36072 Y-85.45032
G01 X-20.39577 Y-85.52045
G01 X-20.42170 Y-85.54639
G01 X-20.49186 Y-85.58146
G01 X-20.60809 Y-85.58146
G01 X-20.67822 Y-85.54639
G01 X-20.70415 Y-85.52045
G01 X-20.73923 Y-85.45032
G01 X-20.73923 Y-85.13409
G01 X-20.70415 Y-85.06394
G01 X-20.67822 Y-85.03801
G01 X-20.60809 Y-85.00295
G01 X-20.49183 Y-85.00295
G01 X-20.42170 Y-85.03801
G01 X-20.39577 Y-85.06394
G01 X-20.36072 Y-85.13407
G01 X-20.36072 Y-85.45032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-24.32739 Y-87.83538 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-24.32739 Y-87.83538
G01 X-24.57476 Y-87.83538
G01 X-24.61773 Y-87.81390
G01 X-24.63922 Y-87.77092
G01 X-24.63922 Y-87.72134
G01 X-24.61773 Y-87.67836
G01 X-24.57476 Y-87.65687
G01 X-24.32739 Y-87.65687
G01 X-24.32739 Y-87.83538
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-25.56071 Y-85.45032 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-25.56071 Y-85.45032
G01 X-25.59576 Y-85.52045
G01 X-25.62172 Y-85.54639
G01 X-25.69187 Y-85.58146
G01 X-25.80808 Y-85.58146
G01 X-25.87823 Y-85.54639
G01 X-25.90419 Y-85.52045
G01 X-25.93925 Y-85.45032
G01 X-25.93925 Y-85.13409
G01 X-25.90419 Y-85.06396
G01 X-25.87823 Y-85.03801
G01 X-25.80810 Y-85.00295
G01 X-25.69185 Y-85.00295
G01 X-25.62172 Y-85.03801
G01 X-25.59576 Y-85.06396
G01 X-25.56071 Y-85.13409
G01 X-25.56071 Y-85.45032
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-30.48348 Y-84.92434 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-30.48348 Y-84.92434
G01 X-30.51551 Y-85.12650
G01 X-30.57876 Y-85.32122
G01 X-30.67167 Y-85.50359
G01 X-30.79199 Y-85.66920
G01 X-30.93677 Y-85.81395
G01 X-31.10235 Y-85.93427
G01 X-31.28475 Y-86.02718
G01 X-31.36105 Y-86.05197
G01 X-31.47944 Y-86.09043
G01 X-31.68163 Y-86.12246
G01 X-31.88632 Y-86.12246
G01 X-32.08851 Y-86.09043
G01 X-32.28320 Y-86.02718
G01 X-32.46560 Y-85.93427
G01 X-32.63118 Y-85.81395
G01 X-32.77593 Y-85.66920
G01 X-32.89628 Y-85.50359
G01 X-32.98919 Y-85.32119
G01 X-33.05244 Y-85.12650
G01 X-33.08447 Y-84.92434
G01 X-33.08447 Y-84.71962
G01 X-33.05244 Y-84.51743
G01 X-32.98919 Y-84.32274
G01 X-32.89628 Y-84.14034
G01 X-32.77593 Y-83.97476
G01 X-32.63118 Y-83.83001
G01 X-32.46560 Y-83.70969
G01 X-32.28320 Y-83.61677
G01 X-32.08851 Y-83.55350
G01 X-31.88632 Y-83.52147
G01 X-31.68163 Y-83.52147
G01 X-31.47944 Y-83.55350
G01 X-31.28475 Y-83.61677
G01 X-31.10235 Y-83.70969
G01 X-30.93677 Y-83.83001
G01 X-30.79199 Y-83.97476
G01 X-30.67167 Y-84.14034
G01 X-30.57876 Y-84.32274
G01 X-30.51551 Y-84.51743
G01 X-30.48348 Y-84.71962
G01 X-30.48348 Y-84.92434
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-38.47498 Y-81.78747 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-38.47498 Y-81.78747
G01 X-38.47498 Y-81.60126
G01 X-38.48507 Y-81.50255
G01 X-38.53843 Y-81.34149
G01 X-38.62741 Y-81.19725
G01 X-38.74725 Y-81.07741
G01 X-38.89147 Y-80.98843
G01 X-39.05255 Y-80.93507
G01 X-39.15126 Y-80.92498
G01 X-39.57496 Y-80.92498
G01 X-39.57496 Y-81.37502
G01 X-39.18466 Y-81.37545
G01 X-39.12012 Y-81.38701
G01 X-39.05436 Y-81.41680
G01 X-39.01842 Y-81.44355
G01 X-38.98700 Y-81.47621
G01 X-38.95860 Y-81.51848
G01 X-38.94024 Y-81.55991
G01 X-38.92520 Y-81.63977
G01 X-38.92502 Y-81.78747
G01 X-38.47498 Y-81.78747
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-38.47498 Y-82.52369 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-38.47498 Y-82.52369
G01 X-38.47498 Y-82.33748
G01 X-38.92502 Y-82.33748
G01 X-38.92520 Y-82.48520
G01 X-38.94024 Y-82.56506
G01 X-38.95860 Y-82.60649
G01 X-38.98700 Y-82.64876
G01 X-39.01842 Y-82.68142
G01 X-39.05436 Y-82.70819
G01 X-39.12012 Y-82.73796
G01 X-39.18466 Y-82.74952
G01 X-39.57496 Y-82.74995
G01 X-39.57496 Y-83.19996
G01 X-39.15128 Y-83.19996
G01 X-39.05255 Y-83.18988
G01 X-38.89147 Y-83.13651
G01 X-38.74725 Y-83.04754
G01 X-38.62741 Y-82.92772
G01 X-38.53843 Y-82.78345
G01 X-38.48507 Y-82.62239
G01 X-38.47498 Y-82.52369
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-40.12499 Y-83.19996 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-40.12499 Y-83.19996
G01 X-40.12499 Y-82.74995
G01 X-40.51531 Y-82.74952
G01 X-40.57986 Y-82.73796
G01 X-40.64562 Y-82.70819
G01 X-40.68156 Y-82.68142
G01 X-40.71270 Y-82.64919
G01 X-40.73838 Y-82.61185
G01 X-40.75954 Y-82.56552
G01 X-40.77478 Y-82.48520
G01 X-40.77495 Y-82.33748
G01 X-41.22497 Y-82.33748
G01 X-41.22497 Y-82.52369
G01 X-41.21488 Y-82.62239
G01 X-41.16152 Y-82.78348
G01 X-41.07254 Y-82.92772
G01 X-40.95270 Y-83.04754
G01 X-40.80846 Y-83.13651
G01 X-40.64739 Y-83.18988
G01 X-40.54866 Y-83.19996
G01 X-40.12499 Y-83.19996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-46.47448 Y-87.12396 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-46.47448 Y-87.12396
G01 X-46.47448 Y-86.87598
G01 X-46.51327 Y-86.63104
G01 X-46.58990 Y-86.39518
G01 X-46.70248 Y-86.17422
G01 X-46.84825 Y-85.97362
G01 X-47.02361 Y-85.79825
G01 X-47.22422 Y-85.65248
G01 X-47.44517 Y-85.53991
G01 X-47.68104 Y-85.46328
G01 X-47.92599 Y-85.42449
G01 X-48.17397 Y-85.42449
G01 X-48.41891 Y-85.46328
G01 X-48.65477 Y-85.53991
G01 X-48.87572 Y-85.65248
G01 X-49.07633 Y-85.79823
G01 X-49.25170 Y-85.97362
G01 X-49.39747 Y-86.17422
G01 X-49.51004 Y-86.39518
G01 X-49.58667 Y-86.63104
G01 X-49.62546 Y-86.87598
G01 X-49.62546 Y-87.12396
G01 X-49.58667 Y-87.36891
G01 X-49.51004 Y-87.60478
G01 X-49.39747 Y-87.82573
G01 X-49.25170 Y-88.02634
G01 X-49.07633 Y-88.20170
G01 X-48.87572 Y-88.34747
G01 X-48.65477 Y-88.46005
G01 X-48.41891 Y-88.53668
G01 X-48.17397 Y-88.57546
G01 X-47.92599 Y-88.57546
G01 X-47.68104 Y-88.53668
G01 X-47.44517 Y-88.46005
G01 X-47.22422 Y-88.34747
G01 X-47.02361 Y-88.20170
G01 X-46.84825 Y-88.02634
G01 X-46.70248 Y-87.82573
G01 X-46.58990 Y-87.60478
G01 X-46.51327 Y-87.36891
G01 X-46.47448 Y-87.12396
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-50.44346 Y-90.96571 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-50.44346 Y-90.96571
G01 X-50.44699 Y-90.86372
G01 X-50.46043 Y-90.76261
G01 X-50.48360 Y-90.66324
G01 X-50.51634 Y-90.56660
G01 X-50.55830 Y-90.47361
G01 X-50.60907 Y-90.38511
G01 X-50.66823 Y-90.30198
G01 X-50.73518 Y-90.22499
G01 X-50.80927 Y-90.15489
G01 X-50.88984 Y-90.09228
G01 X-50.97613 Y-90.03782
G01 X-51.08873 Y-89.92451
G01 X-51.14443 Y-89.83680
G01 X-51.20851 Y-89.75507
G01 X-51.28037 Y-89.68006
G01 X-51.35931 Y-89.61252
G01 X-51.44453 Y-89.55314
G01 X-51.53521 Y-89.50244
G01 X-51.63046 Y-89.46098
G01 X-51.72934 Y-89.42916
G01 X-51.83089 Y-89.40726
G01 X-51.93409 Y-89.39550
G01 X-52.03795 Y-89.39403
G01 X-52.14148 Y-89.40282
G01 X-52.24359 Y-89.42182
G01 X-52.34333 Y-89.45080
G01 X-52.43973 Y-89.48953
G01 X-52.53183 Y-89.53759
G01 X-52.61872 Y-89.59454
G01 X-52.69954 Y-89.65979
G01 X-52.77351 Y-89.73271
G01 X-52.83990 Y-89.81260
G01 X-52.89809 Y-89.89865
G01 X-52.94747 Y-89.99007
G01 X-52.98755 Y-90.08588
G01 X-53.01798 Y-90.18521
G01 X-53.03843 Y-90.28707
G01 X-53.04869 Y-90.39042
G01 X-53.04999 Y-90.95097
G01 X-53.04493 Y-91.05382
G01 X-53.02982 Y-91.15565
G01 X-53.00482 Y-91.25549
G01 X-52.97013 Y-91.35242
G01 X-52.92611 Y-91.44549
G01 X-52.87320 Y-91.53378
G01 X-52.81189 Y-91.61645
G01 X-52.74275 Y-91.69273
G01 X-52.66647 Y-91.76187
G01 X-52.58377 Y-91.82321
G01 X-52.49548 Y-91.87612
G01 X-52.40241 Y-91.92014
G01 X-52.30549 Y-91.95481
G01 X-52.20564 Y-91.97983
G01 X-52.10381 Y-91.99494
G01 X-52.00097 Y-91.99999
G01 X-51.49238 Y-91.99999
G01 X-51.39045 Y-91.99502
G01 X-51.28951 Y-91.98018
G01 X-51.19050 Y-91.95562
G01 X-51.09434 Y-91.92153
G01 X-51.00193 Y-91.87828
G01 X-50.91418 Y-91.82626
G01 X-50.83188 Y-91.76593
G01 X-50.75583 Y-91.69794
G01 X-50.68674 Y-91.62283
G01 X-50.62530 Y-91.54140
G01 X-50.57204 Y-91.45438
G01 X-50.52749 Y-91.36258
G01 X-50.49208 Y-91.26692
G01 X-50.46612 Y-91.16825
G01 X-50.44986 Y-91.06753
G01 X-50.44346 Y-90.96571
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-40.12499 Y-81.37502 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-40.12499 Y-81.37502
G01 X-40.51531 Y-81.37545
G01 X-40.57986 Y-81.38701
G01 X-40.64562 Y-81.41680
G01 X-40.68156 Y-81.44355
G01 X-40.71270 Y-81.47581
G01 X-40.73838 Y-81.51312
G01 X-40.75954 Y-81.55945
G01 X-40.77478 Y-81.63977
G01 X-40.77495 Y-81.78747
G01 X-41.22497 Y-81.78747
G01 X-41.22497 Y-81.60126
G01 X-41.21488 Y-81.50255
G01 X-41.16152 Y-81.34147
G01 X-41.07254 Y-81.19725
G01 X-40.95270 Y-81.07741
G01 X-40.80846 Y-80.98843
G01 X-40.64739 Y-80.93507
G01 X-40.54869 Y-80.92498
G01 X-40.12499 Y-80.92498
G01 X-40.12499 Y-81.37502
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-40.07498 Y-73.33752 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-40.07498 Y-73.33752
G01 X-40.46530 Y-73.33795
G01 X-40.52987 Y-73.34951
G01 X-40.59601 Y-73.37961
G01 X-40.63645 Y-73.41052
G01 X-40.66713 Y-73.44387
G01 X-40.69164 Y-73.48141
G01 X-40.70973 Y-73.52241
G01 X-40.72479 Y-73.60227
G01 X-40.72497 Y-73.74997
G01 X-41.17498 Y-73.74997
G01 X-41.17498 Y-73.56376
G01 X-41.16487 Y-73.46505
G01 X-41.11150 Y-73.30397
G01 X-41.02255 Y-73.15975
G01 X-40.90272 Y-73.03991
G01 X-40.75847 Y-72.95093
G01 X-40.59738 Y-72.89757
G01 X-40.49868 Y-72.88748
G01 X-40.07498 Y-72.88748
G01 X-40.07498 Y-73.33752
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-38.42497 Y-73.74997 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-38.42497 Y-73.74997
G01 X-38.87501 Y-73.74997
G01 X-38.87519 Y-73.60227
G01 X-38.89045 Y-73.52195
G01 X-38.91158 Y-73.47562
G01 X-38.93729 Y-73.43831
G01 X-38.96840 Y-73.40605
G01 X-39.00437 Y-73.37930
G01 X-39.07011 Y-73.34951
G01 X-39.13467 Y-73.33795
G01 X-39.52497 Y-73.33752
G01 X-39.52497 Y-72.88748
G01 X-39.10127 Y-72.88748
G01 X-39.00254 Y-72.89757
G01 X-38.84148 Y-72.95093
G01 X-38.69723 Y-73.03991
G01 X-38.57740 Y-73.15975
G01 X-38.48845 Y-73.30399
G01 X-38.43508 Y-73.46505
G01 X-38.42497 Y-73.56376
G01 X-38.42497 Y-73.74997
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-29.87472 Y-73.65004 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-29.87472 Y-73.65004
G01 X-29.88293 Y-73.55027
G01 X-29.92037 Y-73.43800
G01 X-29.95196 Y-73.38411
G01 X-29.99334 Y-73.32622
G01 X-30.06375 Y-73.25639
G01 X-30.16288 Y-73.19518
G01 X-30.27525 Y-73.15797
G01 X-30.33774 Y-73.15091
G01 X-31.62498 Y-73.14974
G01 X-31.72460 Y-73.15843
G01 X-31.83682 Y-73.19564
G01 X-31.93616 Y-73.25644
G01 X-32.01838 Y-73.33889
G01 X-32.15450 Y-73.56239
G01 X-32.24878 Y-73.58449
G01 X-32.31863 Y-73.59454
G01 X-32.39062 Y-73.59973
G01 X-34.12907 Y-73.59973
G01 X-34.26890 Y-73.58492
G01 X-34.38330 Y-73.55614
G01 X-34.48853 Y-73.35599
G01 X-34.53191 Y-73.28919
G01 X-34.56084 Y-73.25749
G01 X-34.61411 Y-73.20684
G01 X-34.70308 Y-73.15076
G01 X-34.75020 Y-73.13140
G01 X-34.82533 Y-73.10826
G01 X-34.92523 Y-73.09973
G01 X-36.20069 Y-73.10039
G01 X-36.27463 Y-73.10829
G01 X-36.38710 Y-73.14507
G01 X-36.47105 Y-73.19602
G01 X-36.50280 Y-73.22155
G01 X-36.56869 Y-73.28865
G01 X-36.58469 Y-73.31255
G01 X-36.62960 Y-73.38797
G01 X-36.65492 Y-73.45906
G01 X-36.66686 Y-73.50028
G01 X-36.67481 Y-73.57966
G01 X-36.67511 Y-74.33346
G01 X-36.68563 Y-74.47366
G01 X-36.73760 Y-74.54351
G01 X-36.78484 Y-74.59807
G01 X-37.41611 Y-75.22632
G01 X-37.49317 Y-75.28352
G01 X-37.56952 Y-75.29454
G01 X-37.64151 Y-75.29972
G01 X-38.42411 Y-75.29972
G01 X-38.52599 Y-75.29187
G01 X-38.65865 Y-75.26101
G01 X-38.72853 Y-75.23569
G01 X-38.93495 Y-75.12248
G01 X-38.95939 Y-75.10457
G01 X-39.06462 Y-75.11570
G01 X-39.14999 Y-75.11872
G01 X-40.44999 Y-75.11872
G01 X-40.63792 Y-75.10574
G01 X-40.80145 Y-75.20374
G01 X-40.87132 Y-75.23564
G01 X-41.03403 Y-75.28448
G01 X-41.10388 Y-75.29454
G01 X-41.17584 Y-75.29972
G01 X-42.15844 Y-75.29972
G01 X-42.21165 Y-75.29759
G01 X-42.30678 Y-75.28352
G01 X-42.36860 Y-75.23729
G01 X-42.42308 Y-75.19010
G01 X-44.11376 Y-73.50125
G01 X-44.18744 Y-73.45233
G01 X-44.27078 Y-73.41862
G01 X-44.50405 Y-73.37234
G01 X-44.55757 Y-73.30818
G01 X-44.70314 Y-73.11733
G01 X-44.80974 Y-73.01250
G01 X-44.94954 Y-72.91098
G01 X-45.00923 Y-72.87819
G01 X-45.12615 Y-72.82386
G01 X-45.26778 Y-72.77867
G01 X-45.39211 Y-72.75769
G01 X-45.43855 Y-72.75177
G01 X-45.50177 Y-72.74997
G01 X-45.83537 Y-72.75071
G01 X-45.93235 Y-72.76117
G01 X-46.03209 Y-72.77903
G01 X-46.19668 Y-72.83196
G01 X-46.28170 Y-72.87349
G01 X-46.35030 Y-72.91113
G01 X-46.49008 Y-73.01266
G01 X-46.61279 Y-73.13442
G01 X-46.63184 Y-73.15906
G01 X-46.71449 Y-73.27425
G01 X-46.79234 Y-73.42858
G01 X-46.83148 Y-73.54255
G01 X-46.85620 Y-73.64600
G01 X-46.87273 Y-73.76356
G01 X-46.87451 Y-73.90138
G01 X-46.86432 Y-74.00420
G01 X-46.84639 Y-74.10719
G01 X-46.80880 Y-74.22721
G01 X-46.77903 Y-74.30125
G01 X-46.73219 Y-74.39340
G01 X-46.67654 Y-74.48060
G01 X-46.61286 Y-74.56559
G01 X-46.52607 Y-74.65426
G01 X-46.46618 Y-74.70701
G01 X-46.29712 Y-74.82644
G01 X-46.22696 Y-74.88375
G01 X-46.10385 Y-74.99939
G01 X-46.01810 Y-75.10026
G01 X-45.28190 Y-75.10033
G01 X-45.19123 Y-74.99571
G01 X-45.13535 Y-74.93798
G01 X-45.07403 Y-74.88469
G01 X-44.96677 Y-74.80112
G01 X-44.84104 Y-74.71225
G01 X-44.64662 Y-74.54552
G01 X-44.52521 Y-74.46861
G01 X-44.49903 Y-74.47836
G01 X-44.34927 Y-74.55896
G01 X-44.29273 Y-74.60127
G01 X-44.23822 Y-74.64849
G01 X-42.80429 Y-76.08186
G01 X-42.78079 Y-76.10269
G01 X-42.71252 Y-76.14763
G01 X-42.63096 Y-76.18179
G01 X-42.54419 Y-76.19896
G01 X-42.51046 Y-76.20008
G01 X-37.29998 Y-76.20023
G01 X-37.25578 Y-76.19860
G01 X-37.16917 Y-76.18125
G01 X-37.08725 Y-76.14793
G01 X-37.01413 Y-76.09830
G01 X-35.92310 Y-75.00983
G01 X-35.88370 Y-74.97351
G01 X-35.80676 Y-74.91641
G01 X-35.73044 Y-74.90541
G01 X-35.65848 Y-74.90023
G01 X-34.91987 Y-74.90021
G01 X-34.88779 Y-74.89919
G01 X-34.80877 Y-74.88682
G01 X-34.71324 Y-74.85405
G01 X-34.61403 Y-74.79322
G01 X-34.53153 Y-74.71103
G01 X-34.40936 Y-74.53231
G01 X-34.33199 Y-74.51545
G01 X-34.19018 Y-74.50023
G01 X-32.39062 Y-74.50023
G01 X-32.33451 Y-74.50338
G01 X-32.27954 Y-74.50953
G01 X-32.15503 Y-74.53861
G01 X-32.01830 Y-74.76099
G01 X-31.97093 Y-74.81049
G01 X-31.91655 Y-74.85642
G01 X-31.83669 Y-74.90404
G01 X-31.72450 Y-74.94115
G01 X-31.63987 Y-74.94999
G01 X-30.33776 Y-74.94895
G01 X-30.27533 Y-74.94168
G01 X-30.20500 Y-74.92032
G01 X-30.16288 Y-74.90478
G01 X-30.06365 Y-74.84369
G01 X-29.98153 Y-74.76106
G01 X-29.92016 Y-74.66208
G01 X-29.88293 Y-74.54969
G01 X-29.87482 Y-74.46023
G01 X-29.87472 Y-73.65004
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-21.40890 Y-69.39991 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-21.40890 Y-69.39991
G01 X-21.13384 Y-69.14220
G01 X-21.01307 Y-69.03850
G01 X-20.83448 Y-68.89598
G01 X-20.57040 Y-68.70814
G01 X-20.34383 Y-68.56885
G01 X-20.12196 Y-68.45221
G01 X-19.98810 Y-68.39115
G01 X-19.84962 Y-68.33552
G01 X-19.71210 Y-68.28770
G01 X-19.57911 Y-68.24858
G01 X-19.44962 Y-68.21719
G01 X-19.32305 Y-68.19290
G01 X-19.19872 Y-68.17520
G01 X-19.08864 Y-68.16456
G01 X-18.92018 Y-68.15757
G01 X-18.80144 Y-68.15795
G01 X-18.71279 Y-68.16293
G01 X-18.56347 Y-68.17990
G01 X-12.35446 Y-68.17982
G01 X-12.26195 Y-68.17497
G01 X-12.19942 Y-68.16839
G01 X-12.05987 Y-68.14337
G01 X-11.97008 Y-68.11863
G01 X-11.84545 Y-68.07441
G01 X-10.60318 Y-67.55996
G01 X-9.85116 Y-67.55996
G01 X-9.82808 Y-67.54980
G01 X-8.21990 Y-67.54978
G01 X-8.07367 Y-67.39738
G01 X-8.00829 Y-67.33741
G01 X-7.69999 Y-67.11696
G01 X-7.57807 Y-66.99560
G01 X-7.50370 Y-66.89542
G01 X-7.44932 Y-66.80523
G01 X-7.39628 Y-66.69606
G01 X-7.34482 Y-66.53715
G01 X-7.31787 Y-66.36642
G01 X-7.31708 Y-66.20640
G01 X-7.33428 Y-66.07820
G01 X-7.35841 Y-65.97569
G01 X-7.39826 Y-65.85842
G01 X-7.47423 Y-65.70833
G01 X-7.57840 Y-65.56464
G01 X-7.69971 Y-65.44267
G01 X-7.78734 Y-65.37754
G01 X-7.96527 Y-65.25671
G01 X-8.03915 Y-65.19448
G01 X-8.15996 Y-65.07678
G01 X-8.22010 Y-65.00998
G01 X-9.88164 Y-65.00993
G01 X-9.89125 Y-65.00564
G01 X-10.09663 Y-64.90452
G01 X-10.30267 Y-64.79012
G01 X-10.51383 Y-64.65900
G01 X-10.73674 Y-64.50554
G01 X-10.99721 Y-64.30645
G01 X-11.59564 Y-63.81351
G01 X-11.89515 Y-63.57272
G01 X-12.65337 Y-62.97958
G01 X-13.31910 Y-63.15837
G01 X-14.00866 Y-63.57170
G01 X-14.39111 Y-63.61389
G01 X-14.72890 Y-63.63729
G01 X-15.28044 Y-63.33048
G01 X-15.72138 Y-63.10927
G01 X-16.12222 Y-62.93373
G01 X-16.69474 Y-62.71339
G01 X-17.45468 Y-63.07681
G01 X-17.83212 Y-63.24869
G01 X-18.24358 Y-63.42741
G01 X-18.83768 Y-63.66378
G01 X-19.03227 Y-63.75248
G01 X-19.24726 Y-63.86520
G01 X-19.45313 Y-63.98994
G01 X-19.63085 Y-64.11331
G01 X-19.79651 Y-64.24361
G01 X-19.95188 Y-64.38161
G01 X-20.09829 Y-64.52822
G01 X-20.24004 Y-64.68869
G01 X-20.38368 Y-64.87371
G01 X-20.53047 Y-65.09281
G01 X-21.60659 Y-65.53812
G01 X-21.76442 Y-65.58971
G01 X-21.82701 Y-65.60472
G01 X-21.96882 Y-65.62733
G01 X-22.09998 Y-65.63497
G01 X-27.18105 Y-65.63457
G01 X-27.27346 Y-65.79088
G01 X-27.39789 Y-66.01374
G01 X-27.44803 Y-66.12057
G01 X-27.57638 Y-66.43096
G01 X-27.63564 Y-66.60340
G01 X-27.65141 Y-66.65971
G01 X-27.70310 Y-66.90629
G01 X-27.81557 Y-67.07436
G01 X-28.00421 Y-67.39120
G01 X-28.09939 Y-67.53990
G01 X-28.21346 Y-67.70169
G01 X-28.36215 Y-67.90085
G01 X-28.26609 Y-68.07944
G01 X-28.04104 Y-68.41937
G01 X-27.84783 Y-68.64637
G01 X-27.59055 Y-68.88655
G01 X-27.55080 Y-68.91889
G01 X-27.22141 Y-69.14838
G01 X-26.95558 Y-69.29168
G01 X-26.77460 Y-69.37301
G01 X-26.58880 Y-69.44995
G01 X-25.31435 Y-69.44977
G01 X-24.92817 Y-69.42658
G01 X-24.73313 Y-69.39996
G01 X-21.40890 Y-69.39991
G01 X-21.22483 Y-69.57934
G01 X-21.01436 Y-69.76740
G01 X-20.81355 Y-69.93011
G01 X-20.72201 Y-69.99895
G01 X-20.61779 Y-70.07332
G01 X-20.45020 Y-70.18355
G01 X-20.28708 Y-70.27995
G01 X-20.12323 Y-70.36610
G01 X-19.98033 Y-70.43237
G01 X-19.83999 Y-70.48937
G01 X-19.69466 Y-70.54019
G01 X-19.47223 Y-70.60133
G01 X-19.30121 Y-70.63486
G01 X-19.16794 Y-70.65287
G01 X-19.04840 Y-70.66288
G01 X-18.84823 Y-70.66676
G01 X-18.64083 Y-70.65371
G01 X-18.48607 Y-70.63268
G01 X-18.37426 Y-70.61152
G01 X-18.15623 Y-70.55584
G01 X-17.98559 Y-70.49882
G01 X-17.79199 Y-70.41998
G01 X-17.59021 Y-70.32186
G01 X-17.39044 Y-70.20844
G01 X-17.28879 Y-70.14456
G01 X-17.13581 Y-70.03997
G01 X-9.83237 Y-70.03997
G01 X-9.71868 Y-70.08998
G01 X-8.22003 Y-70.08945
G01 X-8.08551 Y-69.94878
G01 X-8.03001 Y-69.89597
G01 X-7.96354 Y-69.84309
G01 X-7.78734 Y-69.72242
G01 X-7.69971 Y-69.65726
G01 X-7.60095 Y-69.55988
G01 X-7.53441 Y-69.47819
G01 X-7.47647 Y-69.39572
G01 X-7.42455 Y-69.29707
G01 X-7.38780 Y-69.21325
G01 X-7.34479 Y-69.07715
G01 X-7.32613 Y-68.97058
G01 X-7.31797 Y-68.90639
G01 X-7.31612 Y-68.85409
G01 X-7.31777 Y-68.73354
G01 X-7.34744 Y-68.55280
G01 X-7.39834 Y-68.39844
G01 X-7.48000 Y-68.23906
G01 X-7.57832 Y-68.10459
G01 X-7.69290 Y-67.98909
G01 X-7.77657 Y-67.92521
G01 X-7.95404 Y-67.80484
G01 X-8.02833 Y-67.74457
G01 X-8.14751 Y-67.62961
G01 X-8.21990 Y-67.54978
G01 X-8.14751 Y-67.62961
G01 X-8.02833 Y-67.74457
G01 X-7.95404 Y-67.80484
G01 X-7.77657 Y-67.92521
G01 X-7.69290 Y-67.98909
G01 X-7.57832 Y-68.10459
G01 X-7.48000 Y-68.23906
G01 X-7.39834 Y-68.39844
G01 X-7.34744 Y-68.55280
G01 X-7.31777 Y-68.73354
G01 X-7.31612 Y-68.85409
G01 X-7.31797 Y-68.90639
G01 X-7.32613 Y-68.97058
G01 X-7.34479 Y-69.07715
G01 X-7.38780 Y-69.21325
G01 X-7.42455 Y-69.29707
G01 X-7.47647 Y-69.39572
G01 X-7.53441 Y-69.47819
G01 X-7.60095 Y-69.55988
G01 X-7.69971 Y-69.65726
G01 X-7.78734 Y-69.72242
G01 X-7.96354 Y-69.84309
G01 X-8.03001 Y-69.89597
G01 X-8.08551 Y-69.94878
G01 X-8.22003 Y-70.08945
G01 X-8.15615 Y-70.16062
G01 X-8.04568 Y-70.26844
G01 X-7.94693 Y-70.34997
G01 X-7.79557 Y-70.45170
G01 X-7.69978 Y-70.52277
G01 X-7.57870 Y-70.64489
G01 X-7.45031 Y-70.78617
G01 X-7.35749 Y-70.80326
G01 X-7.26506 Y-70.80971
G01 X-6.36788 Y-70.80971
G01 X-6.29590 Y-70.80453
G01 X-6.21957 Y-70.79351
G01 X-6.14241 Y-70.73623
G01 X-6.10329 Y-70.70011
G01 X-5.45981 Y-70.05665
G01 X-5.41254 Y-70.00204
G01 X-5.36641 Y-69.94035
G01 X-5.35092 Y-69.81919
G01 X-5.35021 Y-54.33294
G01 X-5.35539 Y-54.26098
G01 X-5.36641 Y-54.18458
G01 X-5.42369 Y-54.10741
G01 X-6.26827 Y-53.25984
G01 X-6.32283 Y-53.21259
G01 X-6.38457 Y-53.16642
G01 X-6.47949 Y-53.15237
G01 X-17.86705 Y-53.15021
G01 X-17.93901 Y-53.15537
G01 X-18.01533 Y-53.16642
G01 X-18.09240 Y-53.22362
G01 X-18.13167 Y-53.25984
G01 X-19.01510 Y-54.14328
G01 X-19.06237 Y-54.19786
G01 X-19.10852 Y-54.25961
G01 X-19.12257 Y-54.35448
G01 X-19.12473 Y-54.40792
G01 X-19.12473 Y-54.95298
G01 X-19.10949 Y-55.09478
G01 X-19.07462 Y-55.22468
G01 X-18.83923 Y-55.32008
G01 X-18.73880 Y-55.38145
G01 X-18.65653 Y-55.46392
G01 X-18.62664 Y-55.50906
G01 X-18.59514 Y-55.56288
G01 X-18.55816 Y-55.67530
G01 X-18.54983 Y-55.76479
G01 X-18.55056 Y-56.61216
G01 X-18.55793 Y-56.67469
G01 X-18.57632 Y-56.73529
G01 X-18.59542 Y-56.78696
G01 X-18.62930 Y-56.84540
G01 X-18.65630 Y-56.88627
G01 X-18.73865 Y-56.96869
G01 X-18.83789 Y-57.02978
G01 X-18.90913 Y-57.05465
G01 X-18.96357 Y-57.06862
G01 X-19.04490 Y-57.07520
G01 X-20.30509 Y-57.07520
G01 X-20.40144 Y-57.06608
G01 X-20.51726 Y-57.02656
G01 X-20.61083 Y-56.96811
G01 X-20.66410 Y-56.91746
G01 X-20.70367 Y-56.87098
G01 X-20.75442 Y-56.78688
G01 X-20.79135 Y-56.67454
G01 X-20.79928 Y-56.60581
G01 X-20.79981 Y-55.75491
G01 X-20.79465 Y-55.69849
G01 X-20.77797 Y-55.62933
G01 X-20.75434 Y-55.56308
G01 X-20.69369 Y-55.46367
G01 X-20.61129 Y-55.38125
G01 X-20.51198 Y-55.32031
G01 X-20.27487 Y-55.22552
G01 X-20.24952 Y-55.13629
G01 X-20.23557 Y-55.06641
G01 X-20.22559 Y-54.96657
G01 X-20.22369 Y-53.97101
G01 X-20.20278 Y-53.86487
G01 X-20.16097 Y-53.76520
G01 X-20.09460 Y-53.66822
G01 X-19.55983 Y-53.13169
G01 X-19.51259 Y-53.07714
G01 X-19.46641 Y-53.01536
G01 X-19.45236 Y-52.92021
G01 X-19.45023 Y-52.86703
G01 X-19.45023 Y-52.37508
G01 X-19.46545 Y-52.23322
G01 X-19.51434 Y-52.07038
G01 X-19.54624 Y-52.00053
G01 X-19.65313 Y-51.82522
G01 X-19.97327 Y-52.02664
G01 X-20.08274 Y-52.07950
G01 X-20.10890 Y-52.08867
G01 X-20.17708 Y-52.09985
G01 X-20.42287 Y-52.09979
G01 X-20.49074 Y-52.08877
G01 X-20.57576 Y-52.05433
G01 X-20.64865 Y-51.99868
G01 X-20.70390 Y-51.92639
G01 X-20.71932 Y-51.89240
G01 X-20.74578 Y-51.81930
G01 X-20.76963 Y-51.72842
G01 X-20.81005 Y-51.61003
G01 X-20.84964 Y-51.59672
G01 X-20.91952 Y-51.57574
G01 X-21.03359 Y-51.55435
G01 X-21.10776 Y-51.55019
G01 X-22.14454 Y-51.55019
G01 X-22.28627 Y-51.56538
G01 X-22.40481 Y-51.59596
G01 X-22.49315 Y-51.78341
G01 X-22.55665 Y-51.88595
G01 X-22.63940 Y-51.96774
G01 X-22.71929 Y-52.01890
G01 X-22.78487 Y-52.04656
G01 X-22.85035 Y-52.06652
G01 X-22.95000 Y-52.07521
G01 X-24.27811 Y-52.07442
G01 X-24.34966 Y-52.06695
G01 X-24.46206 Y-52.02977
G01 X-24.56132 Y-51.96870
G01 X-24.64369 Y-51.88628
G01 X-24.78393 Y-51.65217
G01 X-24.91220 Y-51.62166
G01 X-25.02335 Y-51.61224
G01 X-25.13170 Y-51.61161
G01 X-25.21847 Y-51.59433
G01 X-25.30021 Y-51.56045
G01 X-25.37689 Y-51.50759
G01 X-26.91834 Y-49.96835
G01 X-26.94829 Y-49.93582
G01 X-26.99792 Y-49.86269
G01 X-27.03178 Y-49.78095
G01 X-27.04839 Y-49.69413
G01 X-27.05022 Y-49.64999
G01 X-27.05022 Y-45.69150
G01 X-27.05540 Y-45.61952
G01 X-27.06640 Y-45.54319
G01 X-27.12362 Y-45.46610
G01 X-27.15984 Y-45.42686
G01 X-28.92687 Y-43.65983
G01 X-28.98135 Y-43.61266
G01 X-29.04318 Y-43.56641
G01 X-29.13830 Y-43.55236
G01 X-29.19149 Y-43.55023
G01 X-30.95006 Y-43.55023
G01 X-31.09189 Y-43.56544
G01 X-31.25460 Y-43.61429
G01 X-31.32448 Y-43.64622
G01 X-31.55943 Y-43.80164
G01 X-31.62928 Y-43.86217
G01 X-31.73509 Y-43.96260
G01 X-31.88704 Y-43.81477
G01 X-32.03306 Y-43.70895
G01 X-32.10294 Y-43.66682
G01 X-32.28589 Y-43.58762
G01 X-32.35577 Y-43.56925
G01 X-32.48790 Y-43.55104
G01 X-41.45844 Y-43.55023
G01 X-41.53043 Y-43.55541
G01 X-41.60675 Y-43.56641
G01 X-41.68384 Y-43.62364
G01 X-41.72308 Y-43.65983
G01 X-42.03792 Y-43.97466
G01 X-42.08516 Y-44.02922
G01 X-42.12745 Y-44.08571
G01 X-42.20797 Y-44.23532
G01 X-42.24589 Y-44.33910
G01 X-42.10480 Y-44.44662
G01 X-41.97876 Y-44.58040
G01 X-41.95349 Y-44.64888
G01 X-41.93451 Y-44.80451
G01 X-41.90754 Y-44.91317
G01 X-41.76395 Y-45.26620
G01 X-41.77350 Y-45.37240
G01 X-41.77960 Y-45.52478
G01 X-41.77655 Y-45.67685
G01 X-41.76395 Y-45.83374
G01 X-41.88552 Y-46.12724
G01 X-41.91409 Y-46.21261
G01 X-41.93192 Y-46.28246
G01 X-41.95334 Y-46.45050
G01 X-41.97922 Y-46.52051
G01 X-42.02212 Y-46.57781
G01 X-42.07942 Y-46.62073
G01 X-42.15087 Y-46.64702
G01 X-42.19999 Y-46.65022
G01 X-42.71701 Y-46.65022
G01 X-42.78897 Y-46.65541
G01 X-42.86532 Y-46.66640
G01 X-42.94254 Y-46.72373
G01 X-45.21089 Y-48.98903
G01 X-45.25333 Y-49.02855
G01 X-45.33999 Y-49.08634
G01 X-45.43987 Y-49.12771
G01 X-45.55117 Y-49.14864
G01 X-47.16704 Y-49.15022
G01 X-47.23897 Y-49.15538
G01 X-47.31533 Y-49.16640
G01 X-47.39254 Y-49.22373
G01 X-47.43166 Y-49.25985
G01 X-48.19010 Y-50.01829
G01 X-48.23735 Y-50.07282
G01 X-48.28352 Y-50.13460
G01 X-48.29757 Y-50.22949
G01 X-48.29973 Y-50.28291
G01 X-48.29973 Y-56.31703
G01 X-48.29455 Y-56.38902
G01 X-48.28352 Y-56.46534
G01 X-48.22632 Y-56.54241
G01 X-48.19010 Y-56.58168
G01 X-47.43166 Y-57.34009
G01 X-47.31571 Y-57.43440
G01 X-47.22193 Y-57.44680
G01 X-47.15846 Y-57.44931
G01 X-47.06674 Y-57.44454
G01 X-46.99689 Y-57.43448
G01 X-46.87286 Y-57.40187
G01 X-46.78033 Y-57.18975
G01 X-46.71838 Y-57.08889
G01 X-46.66374 Y-57.03247
G01 X-46.63631 Y-57.00624
G01 X-46.56031 Y-56.95851
G01 X-46.32495 Y-56.83225
G01 X-46.15688 Y-56.71233
G01 X-45.93598 Y-56.74098
G01 X-45.72437 Y-56.74998
G01 X-45.44777 Y-56.74980
G01 X-45.29341 Y-56.74309
G01 X-45.16672 Y-56.73085
G01 X-45.04497 Y-56.71302
G01 X-44.86987 Y-56.83359
G01 X-44.62196 Y-56.96875
G01 X-44.56407 Y-57.00624
G01 X-44.48206 Y-57.08929
G01 X-44.43860 Y-57.15589
G01 X-44.41178 Y-57.21073
G01 X-44.38384 Y-57.30044
G01 X-44.37543 Y-57.36278
G01 X-44.37472 Y-58.59981
G01 X-44.38310 Y-58.69965
G01 X-44.40985 Y-58.78434
G01 X-44.43075 Y-58.83074
G01 X-44.48130 Y-58.91124
G01 X-44.56367 Y-58.99371
G01 X-44.61325 Y-59.02604
G01 X-44.66308 Y-59.05439
G01 X-44.77533 Y-59.09168
G01 X-44.83776 Y-59.09894
G01 X-46.36219 Y-59.09942
G01 X-46.42447 Y-59.09102
G01 X-46.53697 Y-59.05462
G01 X-46.59519 Y-59.02046
G01 X-46.64888 Y-58.98144
G01 X-46.71868 Y-58.91129
G01 X-46.77149 Y-58.82640
G01 X-46.87240 Y-58.59760
G01 X-46.97949 Y-58.56801
G01 X-47.05355 Y-58.55523
G01 X-47.12455 Y-58.55058
G01 X-47.36630 Y-58.55023
G01 X-47.43897 Y-58.55541
G01 X-47.51533 Y-58.56641
G01 X-47.59254 Y-58.62373
G01 X-47.63166 Y-58.65985
G01 X-48.19010 Y-59.21830
G01 X-48.23735 Y-59.27283
G01 X-48.28352 Y-59.33460
G01 X-48.29757 Y-59.42950
G01 X-48.29973 Y-59.48291
G01 X-48.29973 Y-76.66706
G01 X-48.29455 Y-76.73901
G01 X-48.28352 Y-76.81534
G01 X-48.20857 Y-76.91217
G01 X-47.24174 Y-77.88001
G01 X-47.18726 Y-77.92720
G01 X-47.13074 Y-77.96949
G01 X-46.98109 Y-78.05006
G01 X-46.93161 Y-78.06853
G01 X-46.84659 Y-78.00205
G01 X-46.68360 Y-77.85514
G01 X-46.62328 Y-77.81628
G01 X-46.38010 Y-77.68506
G01 X-46.20697 Y-77.56246
G01 X-45.98805 Y-77.59080
G01 X-45.77436 Y-77.60000
G01 X-45.49775 Y-77.59977
G01 X-45.34342 Y-77.59306
G01 X-45.22767 Y-77.58219
G01 X-45.09499 Y-77.56296
G01 X-44.92498 Y-77.68090
G01 X-44.67218 Y-77.81861
G01 X-44.62049 Y-77.85202
G01 X-44.53288 Y-77.93751
G01 X-44.47037 Y-78.03799
G01 X-44.36949 Y-78.33195
G01 X-44.26557 Y-78.36291
G01 X-44.19570 Y-78.37686
G01 X-44.09572 Y-78.38684
G01 X-41.21171 Y-78.38719
G01 X-41.13967 Y-78.38204
G01 X-41.00218 Y-78.35786
G01 X-40.89375 Y-78.21381
G01 X-40.81120 Y-78.13139
G01 X-40.71211 Y-78.07007
G01 X-40.59969 Y-78.03299
G01 X-40.49974 Y-78.02474
G01 X-39.17427 Y-78.02540
G01 X-39.08850 Y-78.03634
G01 X-38.98783 Y-78.07007
G01 X-38.88890 Y-78.13157
G01 X-38.84283 Y-78.17498
G01 X-38.80625 Y-78.21366
G01 X-38.74537 Y-78.31300
G01 X-38.70793 Y-78.42527
G01 X-38.69972 Y-78.52499
G01 X-38.69972 Y-79.34998
G01 X-38.70793 Y-79.44968
G01 X-38.74537 Y-79.56194
G01 X-38.76861 Y-79.60304
G01 X-38.80625 Y-79.66128
G01 X-38.88382 Y-79.73852
G01 X-38.98789 Y-79.80477
G01 X-39.10033 Y-79.84170
G01 X-39.16276 Y-79.84894
G01 X-40.50460 Y-79.85018
G01 X-40.59969 Y-79.84195
G01 X-40.71206 Y-79.80477
G01 X-40.81115 Y-79.74350
G01 X-40.89350 Y-79.66093
G01 X-41.00142 Y-79.51775
G01 X-41.10058 Y-79.49702
G01 X-41.15555 Y-79.49087
G01 X-41.21166 Y-79.48773
G01 X-44.15163 Y-79.48773
G01 X-44.29344 Y-79.50294
G01 X-44.39214 Y-79.52649
G01 X-44.52984 Y-79.75872
G01 X-44.60489 Y-79.83517
G01 X-44.65473 Y-79.87043
G01 X-44.71312 Y-79.90431
G01 X-44.82542 Y-79.94152
G01 X-44.92498 Y-79.95023
G01 X-46.37499 Y-79.95023
G01 X-46.47466 Y-79.94195
G01 X-46.58706 Y-79.90477
G01 X-46.62785 Y-79.88112
G01 X-46.68614 Y-79.84350
G01 X-46.76839 Y-79.76105
G01 X-46.82887 Y-79.66159
G01 X-46.92041 Y-79.44457
G01 X-46.99859 Y-79.42113
G01 X-47.20999 Y-79.37749
G01 X-47.30994 Y-79.33634
G01 X-47.39976 Y-79.27617
G01 X-49.27590 Y-77.39951
G01 X-49.33605 Y-77.30978
G01 X-49.37727 Y-77.20995
G01 X-49.39810 Y-77.10396
G01 X-49.40021 Y-77.04996
G01 X-49.39874 Y-59.04591
G01 X-49.37974 Y-58.94878
G01 X-49.36262 Y-58.90057
G01 X-49.33592 Y-58.84022
G01 X-49.27598 Y-58.75035
G01 X-48.69277 Y-58.16463
G01 X-48.60326 Y-58.05363
G01 X-48.52122 Y-57.89996
G01 X-48.55055 Y-57.83577
G01 X-48.62348 Y-57.71670
G01 X-48.65675 Y-57.67542
G01 X-48.69274 Y-57.63532
G01 X-49.27608 Y-57.04967
G01 X-49.33612 Y-56.95980
G01 X-49.35390 Y-56.92066
G01 X-49.37776 Y-56.86011
G01 X-49.39866 Y-56.75401
G01 X-49.40023 Y-49.89995
G01 X-49.39866 Y-49.84593
G01 X-49.38431 Y-49.76800
G01 X-49.37773 Y-49.73988
G01 X-49.33612 Y-49.64011
G01 X-49.27555 Y-49.55068
G01 X-49.23905 Y-49.51087
G01 X-47.93905 Y-48.21088
G01 X-47.88479 Y-48.16287
G01 X-47.80966 Y-48.11415
G01 X-47.70986 Y-48.07288
G01 X-47.63676 Y-48.05677
G01 X-47.57575 Y-48.05037
G01 X-45.98289 Y-48.04971
G01 X-45.91094 Y-48.04453
G01 X-45.83458 Y-48.03351
G01 X-45.75754 Y-47.97633
G01 X-45.71828 Y-47.94011
G01 X-44.25983 Y-46.48167
G01 X-44.21256 Y-46.42709
G01 X-44.16641 Y-46.36534
G01 X-44.15237 Y-46.27024
G01 X-44.15023 Y-46.21705
G01 X-44.15023 Y-44.69999
G01 X-44.14701 Y-44.65084
G01 X-44.12074 Y-44.57941
G01 X-44.07784 Y-44.52211
G01 X-44.02051 Y-44.47921
G01 X-43.94904 Y-44.45292
G01 X-43.75674 Y-44.44454
G01 X-43.68686 Y-44.43451
G01 X-43.55158 Y-44.39745
G01 X-43.45437 Y-44.15259
G01 X-43.39885 Y-44.06364
G01 X-42.11844 Y-42.78170
G01 X-42.08582 Y-42.75165
G01 X-42.05270 Y-42.72791
G01 X-42.01270 Y-42.70200
G01 X-41.96362 Y-42.68079
G01 X-41.93098 Y-42.66809
G01 X-41.90111 Y-42.66181
G01 X-41.84414 Y-42.65163
G01 X-41.79997 Y-42.64972
G01 X-28.84996 Y-42.64972
G01 X-28.80581 Y-42.65153
G01 X-28.71900 Y-42.66816
G01 X-28.63726 Y-42.70200
G01 X-28.56411 Y-42.75165
G01 X-28.53159 Y-42.78160
G01 X-26.28159 Y-45.03161
G01 X-26.25164 Y-45.06412
G01 X-26.20198 Y-45.13727
G01 X-26.16810 Y-45.21896
G01 X-26.15164 Y-45.30580
G01 X-26.14971 Y-45.34997
G01 X-26.14971 Y-49.30844
G01 X-26.14453 Y-49.38039
G01 X-26.13353 Y-49.45677
G01 X-26.07623 Y-49.53394
G01 X-26.04011 Y-49.57308
G01 X-25.17496 Y-50.43823
G01 X-25.06391 Y-50.52774
G01 X-24.91430 Y-50.60826
G01 X-24.86546 Y-50.62649
G01 X-24.82398 Y-50.62474
G01 X-24.74240 Y-50.54503
G01 X-24.61042 Y-50.40394
G01 X-24.55860 Y-50.35514
G01 X-24.50280 Y-50.31880
G01 X-24.44875 Y-50.29037
G01 X-24.34951 Y-50.25878
G01 X-24.28720 Y-50.25052
G01 X-22.95022 Y-50.24973
G01 X-22.85035 Y-50.25845
G01 X-22.73791 Y-50.29517
G01 X-22.63882 Y-50.35644
G01 X-22.55627 Y-50.43866
G01 X-22.43392 Y-50.61702
G01 X-22.32635 Y-50.64039
G01 X-22.21520 Y-50.64971
G01 X-21.05917 Y-50.64971
G01 X-20.91734 Y-50.63449
G01 X-20.79618 Y-50.60297
G01 X-20.63651 Y-50.30125
G01 X-19.97487 Y-50.30031
G01 X-19.74711 Y-50.45817
G01 X-19.64939 Y-50.53297
G01 X-19.64998 Y-51.74993
G01 X-19.65313 Y-51.82522
G01 X-19.64998 Y-51.74993
G01 X-19.64939 Y-50.53297
G01 X-19.52933 Y-50.44059
G01 X-19.32488 Y-50.30008
G01 X-18.67040 Y-50.30061
G01 X-18.60276 Y-50.43267
G01 X-18.57104 Y-50.50391
G01 X-18.56085 Y-50.53294
G01 X-18.55039 Y-50.60206
G01 X-18.55000 Y-51.67544
G01 X-18.53474 Y-51.81737
G01 X-18.48582 Y-51.98016
G01 X-18.47149 Y-52.01148
G01 X-18.34353 Y-52.03515
G01 X-18.22941 Y-52.04691
G01 X-18.17548 Y-52.04981
G01 X-6.09590 Y-52.05118
G01 X-5.98996 Y-52.07254
G01 X-5.91119 Y-52.10401
G01 X-5.86623 Y-52.12839
G01 X-5.78993 Y-52.18321
G01 X-4.41092 Y-53.56085
G01 X-4.37434 Y-53.60071
G01 X-4.34645 Y-53.63919
G01 X-4.31394 Y-53.69022
G01 X-4.29098 Y-53.74178
G01 X-4.27246 Y-53.78996
G01 X-4.26197 Y-53.83558
G01 X-4.25156 Y-53.89593
G01 X-4.24973 Y-53.94998
G01 X-4.25118 Y-70.22904
G01 X-4.27254 Y-70.33496
G01 X-4.30401 Y-70.41373
G01 X-4.32842 Y-70.45869
G01 X-4.38321 Y-70.53499
G01 X-5.59585 Y-71.74903
G01 X-5.63570 Y-71.78556
G01 X-5.67419 Y-71.81347
G01 X-5.72519 Y-71.84598
G01 X-5.82077 Y-71.88606
G01 X-5.93095 Y-71.90837
G01 X-7.26506 Y-71.91022
G01 X-7.33202 Y-71.91469
G01 X-7.45056 Y-71.93331
G01 X-7.51546 Y-72.00021
G01 X-7.57705 Y-72.07334
G01 X-7.71909 Y-72.21913
G01 X-7.82137 Y-72.34116
G01 X-7.88028 Y-72.43056
G01 X-7.97484 Y-72.59096
G01 X-8.11139 Y-72.61159
G01 X-8.20646 Y-72.62124
G01 X-8.40471 Y-72.62988
G01 X-8.62041 Y-72.62162
G01 X-8.72577 Y-72.61101
G01 X-8.85792 Y-72.59069
G01 X-8.94659 Y-72.43641
G01 X-9.06493 Y-72.27153
G01 X-9.11987 Y-72.21004
G01 X-9.23354 Y-72.09729
G01 X-9.32551 Y-71.99130
G01 X-9.38167 Y-71.93377
G01 X-9.45800 Y-71.91822
G01 X-9.53593 Y-71.91118
G01 X-27.39022 Y-71.91012
G01 X-27.43398 Y-71.90842
G01 X-27.54000 Y-71.88751
G01 X-27.63995 Y-71.84639
G01 X-27.72974 Y-71.78617
G01 X-27.90828 Y-71.60984
G01 X-27.96286 Y-71.56257
G01 X-28.02459 Y-71.51642
G01 X-28.11948 Y-71.50237
G01 X-28.17290 Y-71.50021
G01 X-29.67104 Y-71.50021
G01 X-29.74300 Y-71.50539
G01 X-29.87746 Y-71.52876
G01 X-29.98701 Y-71.66592
G01 X-30.06504 Y-71.74451
G01 X-30.16283 Y-71.80489
G01 X-30.27528 Y-71.84194
G01 X-30.37548 Y-71.85022
G01 X-31.66214 Y-71.84895
G01 X-31.72463 Y-71.84169
G01 X-31.83705 Y-71.80476
G01 X-31.93619 Y-71.74360
G01 X-31.97850 Y-71.70344
G01 X-32.01833 Y-71.66102
G01 X-32.07952 Y-71.56193
G01 X-32.11703 Y-71.44969
G01 X-32.12511 Y-71.36023
G01 X-32.12521 Y-70.55005
G01 X-32.12194 Y-70.48886
G01 X-32.11686 Y-70.45028
G01 X-32.07987 Y-70.33786
G01 X-32.01866 Y-70.23870
G01 X-31.98533 Y-70.20385
G01 X-31.93349 Y-70.15508
G01 X-31.83657 Y-70.09620
G01 X-31.72463 Y-70.05825
G01 X-31.67843 Y-70.05213
G01 X-30.34681 Y-70.04987
G01 X-30.10530 Y-70.03981
G01 X-29.85313 Y-70.01525
G01 X-29.89944 Y-69.77865
G01 X-29.92410 Y-69.70453
G01 X-30.00812 Y-69.53725
G01 X-30.05450 Y-69.47291
G01 X-30.10726 Y-69.41086
G01 X-31.31828 Y-68.19984
G01 X-31.37284 Y-68.15259
G01 X-31.43459 Y-68.10642
G01 X-31.52948 Y-68.09237
G01 X-31.58290 Y-68.09021
G01 X-32.25866 Y-68.09021
G01 X-32.39999 Y-68.10022
G01 X-34.18833 Y-68.10022
G01 X-34.26029 Y-68.10540
G01 X-34.39882 Y-68.12986
G01 X-34.50646 Y-68.27345
G01 X-34.55018 Y-68.31945
G01 X-34.58881 Y-68.35602
G01 X-34.68789 Y-68.41726
G01 X-34.80026 Y-68.45445
G01 X-34.89998 Y-68.46273
G01 X-36.23714 Y-68.46156
G01 X-36.31159 Y-68.45107
G01 X-36.39409 Y-68.42399
G01 X-36.43976 Y-68.40154
G01 X-36.52391 Y-68.34436
G01 X-36.67915 Y-68.18211
G01 X-36.71487 Y-68.17299
G01 X-36.81626 Y-68.15734
G01 X-36.86973 Y-68.15519
G01 X-38.08471 Y-68.15521
G01 X-38.22652 Y-68.17042
G01 X-38.32347 Y-68.19341
G01 X-38.46127 Y-68.42376
G01 X-38.51976 Y-68.48361
G01 X-38.54367 Y-68.50621
G01 X-38.64285 Y-68.56738
G01 X-38.75525 Y-68.60446
G01 X-38.85504 Y-68.61272
G01 X-40.79593 Y-68.61051
G01 X-40.84468 Y-68.60446
G01 X-40.95331 Y-68.56865
G01 X-41.05768 Y-68.50469
G01 X-41.13863 Y-68.42376
G01 X-41.17361 Y-68.36976
G01 X-41.19959 Y-68.32445
G01 X-41.23685 Y-68.21218
G01 X-41.24523 Y-68.11249
G01 X-41.24523 Y-67.09745
G01 X-41.23685 Y-66.99778
G01 X-41.21191 Y-66.91780
G01 X-41.19672 Y-66.87995
G01 X-41.13868 Y-66.78615
G01 X-41.05603 Y-66.70406
G01 X-40.95710 Y-66.64256
G01 X-40.85644 Y-66.60883
G01 X-40.81628 Y-66.60172
G01 X-40.77053 Y-66.59789
G01 X-38.83980 Y-66.59745
G01 X-38.75545 Y-66.60632
G01 X-38.67544 Y-66.63075
G01 X-38.61981 Y-66.65590
G01 X-38.56340 Y-66.69103
G01 X-38.50902 Y-66.73695
G01 X-38.46165 Y-66.78648
G01 X-38.32279 Y-67.01544
G01 X-38.19586 Y-67.04538
G01 X-38.14090 Y-67.05155
G01 X-38.08471 Y-67.05473
G01 X-36.94557 Y-67.05473
G01 X-36.80374 Y-67.03949
G01 X-36.71997 Y-67.02072
G01 X-36.59366 Y-66.82618
G01 X-36.51128 Y-66.74373
G01 X-36.41210 Y-66.68257
G01 X-36.38433 Y-66.67233
G01 X-36.29968 Y-66.64549
G01 X-36.19996 Y-66.63723
G01 X-34.89485 Y-66.63726
G01 X-34.80037 Y-66.64594
G01 X-34.68812 Y-66.68313
G01 X-34.58911 Y-66.74434
G01 X-34.50649 Y-66.82646
G01 X-34.39856 Y-66.96969
G01 X-34.29948 Y-66.99039
G01 X-34.24451 Y-66.99656
G01 X-34.18833 Y-66.99971
G01 X-32.67182 Y-66.99971
G01 X-32.59986 Y-66.99453
G01 X-32.48432 Y-66.97594
G01 X-32.42709 Y-66.95529
G01 X-32.30187 Y-66.89974
G01 X-32.22407 Y-66.85885
G01 X-32.32295 Y-66.47873
G01 X-32.32282 Y-66.06299
G01 X-32.29399 Y-65.96106
G01 X-32.25556 Y-65.89494
G01 X-32.19024 Y-65.80289
G01 X-32.13530 Y-65.73672
G01 X-32.06082 Y-65.63472
G01 X-30.24917 Y-65.63545
G01 X-30.22984 Y-65.64015
G01 X-30.16906 Y-65.70188
G01 X-30.12445 Y-65.72616
G01 X-29.95034 Y-65.79232
G01 X-29.88049 Y-65.80741
G01 X-29.77249 Y-65.81910
G01 X-28.96187 Y-65.81971
G01 X-28.88956 Y-65.81455
G01 X-28.81315 Y-65.80353
G01 X-28.73599 Y-65.74622
G01 X-28.69687 Y-65.71010
G01 X-28.40985 Y-65.42308
G01 X-28.36266 Y-65.36860
G01 X-28.31641 Y-65.30678
G01 X-28.30236 Y-65.21166
G01 X-28.30023 Y-60.50544
G01 X-28.30541 Y-60.43348
G01 X-28.31544 Y-60.36361
G01 X-28.34587 Y-60.24540
G01 X-28.53332 Y-60.15667
G01 X-28.57353 Y-60.13387
G01 X-28.63629 Y-60.09371
G01 X-28.71869 Y-60.01128
G01 X-28.76403 Y-59.93976
G01 X-28.78659 Y-59.89386
G01 X-28.81679 Y-59.79965
G01 X-28.82512 Y-59.71024
G01 X-28.82481 Y-58.87966
G01 X-28.81686 Y-58.80026
G01 X-28.79192 Y-58.72028
G01 X-28.77673 Y-58.68243
G01 X-28.71869 Y-58.58866
G01 X-28.63604 Y-58.50656
G01 X-28.53711 Y-58.44507
G01 X-28.42461 Y-58.40829
G01 X-28.36220 Y-58.40052
G01 X-27.07010 Y-58.39976
G01 X-26.97549 Y-58.40900
G01 X-26.86337 Y-58.44619
G01 X-26.77051 Y-58.50204
G01 X-26.56193 Y-58.69358
G01 X-26.33063 Y-58.88208
G01 X-26.33033 Y-59.70981
G01 X-26.33861 Y-59.85208
G01 X-26.36932 Y-60.03834
G01 X-26.41887 Y-60.21235
G01 X-26.50018 Y-60.40979
G01 X-26.61417 Y-60.61860
G01 X-26.74272 Y-60.80696
G01 X-26.74272 Y-62.52276
G01 X-26.91544 Y-62.70788
G01 X-27.05306 Y-62.88796
G01 X-27.07986 Y-62.92880
G01 X-27.15321 Y-63.05608
G01 X-27.21488 Y-63.19583
G01 X-27.25748 Y-63.33333
G01 X-27.27785 Y-63.44166
G01 X-27.28677 Y-63.55839
G01 X-27.28727 Y-63.88908
G01 X-27.28207 Y-63.97727
G01 X-27.27595 Y-64.02824
G01 X-27.24834 Y-64.16004
G01 X-27.23312 Y-64.21102
G01 X-27.17206 Y-64.36413
G01 X-27.22941 Y-64.50670
G01 X-27.26307 Y-64.63015
G01 X-27.27275 Y-64.68113
G01 X-27.28494 Y-64.78199
G01 X-27.28745 Y-64.85039
G01 X-27.28463 Y-65.22222
G01 X-27.26568 Y-65.35989
G01 X-27.24166 Y-65.45450
G01 X-27.18105 Y-65.63457
G01 X-27.24166 Y-65.45450
G01 X-27.26568 Y-65.35989
G01 X-27.28463 Y-65.22222
G01 X-27.28745 Y-64.85039
G01 X-27.28494 Y-64.78199
G01 X-27.27275 Y-64.68113
G01 X-27.26307 Y-64.63015
G01 X-27.22941 Y-64.50670
G01 X-27.17206 Y-64.36413
G01 X-27.23312 Y-64.21102
G01 X-27.24834 Y-64.16004
G01 X-27.27595 Y-64.02824
G01 X-27.28207 Y-63.97727
G01 X-27.28727 Y-63.88908
G01 X-27.28677 Y-63.55839
G01 X-27.27785 Y-63.44166
G01 X-27.25748 Y-63.33333
G01 X-27.21488 Y-63.19583
G01 X-27.15321 Y-63.05608
G01 X-27.07986 Y-62.92880
G01 X-27.05306 Y-62.88796
G01 X-26.91544 Y-62.70788
G01 X-26.74272 Y-62.52276
G01 X-26.74272 Y-60.80696
G01 X-26.61417 Y-60.61860
G01 X-26.50018 Y-60.40979
G01 X-26.41887 Y-60.21235
G01 X-26.36932 Y-60.03834
G01 X-26.33861 Y-59.85208
G01 X-26.33033 Y-59.70981
G01 X-26.33063 Y-58.88208
G01 X-26.19883 Y-58.68528
G01 X-26.16388 Y-58.61540
G01 X-26.10666 Y-58.44738
G01 X-26.09403 Y-58.37753
G01 X-26.08588 Y-58.28716
G01 X-26.08573 Y-57.22178
G01 X-26.09091 Y-57.14977
G01 X-26.10094 Y-57.07990
G01 X-26.14984 Y-56.91706
G01 X-26.18174 Y-56.84718
G01 X-26.33043 Y-56.62016
G01 X-26.51646 Y-56.76760
G01 X-26.76345 Y-56.99326
G01 X-26.86297 Y-57.05462
G01 X-26.97529 Y-57.09196
G01 X-27.05969 Y-57.09999
G01 X-28.36223 Y-57.09950
G01 X-28.42466 Y-57.09196
G01 X-28.53711 Y-57.05488
G01 X-28.63619 Y-56.99359
G01 X-28.71841 Y-56.91106
G01 X-28.75641 Y-56.85287
G01 X-28.77980 Y-56.81205
G01 X-28.81679 Y-56.69966
G01 X-28.82512 Y-56.61017
G01 X-28.82438 Y-55.76275
G01 X-28.81679 Y-55.70029
G01 X-28.77988 Y-55.58785
G01 X-28.71849 Y-55.48838
G01 X-28.58245 Y-55.32252
G01 X-28.53794 Y-55.26131
G01 X-28.58201 Y-55.16291
G01 X-28.65499 Y-55.04381
G01 X-28.72420 Y-54.96250
G01 X-29.22687 Y-54.45984
G01 X-29.28140 Y-54.41259
G01 X-29.34318 Y-54.36641
G01 X-29.43807 Y-54.35237
G01 X-29.49151 Y-54.35023
G01 X-32.67934 Y-54.35023
G01 X-32.75127 Y-54.35539
G01 X-32.82115 Y-54.36545
G01 X-32.91508 Y-54.38742
G01 X-33.05193 Y-54.61076
G01 X-33.12092 Y-54.68175
G01 X-33.16168 Y-54.71226
G01 X-33.23324 Y-54.75404
G01 X-33.31386 Y-54.78290
G01 X-33.35333 Y-54.79301
G01 X-33.44500 Y-54.80022
G01 X-34.70009 Y-54.80020
G01 X-34.79457 Y-54.79151
G01 X-34.86000 Y-54.77157
G01 X-34.92559 Y-54.74393
G01 X-35.00555 Y-54.69278
G01 X-35.04098 Y-54.66047
G01 X-35.08827 Y-54.61099
G01 X-35.22503 Y-54.38861
G01 X-35.34944 Y-54.35956
G01 X-35.40438 Y-54.35338
G01 X-35.46061 Y-54.35023
G01 X-37.10945 Y-54.35023
G01 X-37.25538 Y-54.36547
G01 X-37.34260 Y-54.42643
G01 X-37.41550 Y-54.46850
G01 X-37.51918 Y-54.49827
G01 X-38.80577 Y-54.49804
G01 X-38.90945 Y-54.46850
G01 X-38.99596 Y-54.41711
G01 X-39.06698 Y-54.34587
G01 X-39.11811 Y-54.25928
G01 X-39.14565 Y-54.16535
G01 X-39.14984 Y-53.92186
G01 X-39.15487 Y-53.85234
G01 X-39.17524 Y-53.71216
G01 X-39.20069 Y-53.58343
G01 X-39.39230 Y-53.55986
G01 X-39.52449 Y-53.55021
G01 X-40.68077 Y-53.54798
G01 X-40.78455 Y-53.51877
G01 X-40.89344 Y-53.46083
G01 X-41.00597 Y-53.45024
G01 X-44.25143 Y-53.45024
G01 X-44.32341 Y-53.45539
G01 X-44.39326 Y-53.46545
G01 X-44.45358 Y-53.47762
G01 X-44.53436 Y-53.57609
G01 X-44.63733 Y-53.71539
G01 X-44.73080 Y-53.81089
G01 X-44.81142 Y-53.87759
G01 X-44.96824 Y-53.98960
G01 X-45.07365 Y-54.07703
G01 X-45.15920 Y-54.16619
G01 X-45.23204 Y-54.24998
G01 X-45.96765 Y-54.24973
G01 X-46.02026 Y-54.18640
G01 X-46.12168 Y-54.08348
G01 X-46.20083 Y-54.01280
G01 X-46.43979 Y-53.83845
G01 X-46.56257 Y-53.71534
G01 X-46.66453 Y-53.57576
G01 X-46.71302 Y-53.48392
G01 X-46.75500 Y-53.38808
G01 X-46.79638 Y-53.25720
G01 X-46.82307 Y-53.08638
G01 X-46.82475 Y-52.96007
G01 X-46.82302 Y-52.91351
G01 X-46.81294 Y-52.83698
G01 X-46.79605 Y-52.74285
G01 X-46.78279 Y-52.69669
G01 X-46.74291 Y-52.57830
G01 X-46.66394 Y-52.42453
G01 X-46.56288 Y-52.28435
G01 X-46.47835 Y-52.19797
G01 X-46.44027 Y-52.16246
G01 X-46.38137 Y-52.11712
G01 X-46.28523 Y-52.05194
G01 X-46.14655 Y-51.98227
G01 X-45.98211 Y-51.92888
G01 X-45.81139 Y-51.90178
G01 X-45.44860 Y-51.89992
G01 X-45.38856 Y-51.90178
G01 X-45.33847 Y-51.90800
G01 X-45.24909 Y-51.92253
G01 X-45.18871 Y-51.93695
G01 X-45.05341 Y-51.98224
G01 X-44.89941 Y-52.06070
G01 X-44.75953 Y-52.16228
G01 X-44.66529 Y-52.25438
G01 X-44.63730 Y-52.28448
G01 X-44.54086 Y-52.41526
G01 X-44.45361 Y-52.52121
G01 X-44.34401 Y-52.54325
G01 X-44.29821 Y-52.54752
G01 X-41.00597 Y-52.54970
G01 X-40.89344 Y-52.53911
G01 X-40.78455 Y-52.48118
G01 X-40.68077 Y-52.45197
G01 X-39.43975 Y-52.44988
G01 X-39.39299 Y-52.45209
G01 X-39.33068 Y-52.46855
G01 X-39.29037 Y-52.48120
G01 X-39.00409 Y-52.64285
G01 X-39.04590 Y-52.90279
G01 X-39.04973 Y-53.02550
G01 X-39.04455 Y-53.09748
G01 X-39.02931 Y-53.20876
G01 X-38.99868 Y-53.36743
G01 X-39.20069 Y-53.58343
G01 X-38.99868 Y-53.36743
G01 X-38.84709 Y-53.38669
G01 X-38.67547 Y-53.39972
G01 X-37.52190 Y-53.40172
G01 X-37.44255 Y-53.42222
G01 X-37.38007 Y-53.44450
G01 X-37.29264 Y-53.44973
G01 X-35.46061 Y-53.44973
G01 X-35.38863 Y-53.44455
G01 X-35.31878 Y-53.43449
G01 X-35.22422 Y-53.41231
G01 X-35.08830 Y-53.18895
G01 X-35.04098 Y-53.13947
G01 X-34.98662 Y-53.09357
G01 X-34.90659 Y-53.04610
G01 X-34.86008 Y-53.02839
G01 X-34.79452 Y-53.00843
G01 X-34.69498 Y-52.99972
G01 X-33.44500 Y-52.99972
G01 X-33.34533 Y-53.00825
G01 X-33.23324 Y-53.04587
G01 X-33.16176 Y-53.08765
G01 X-33.12099 Y-53.11813
G01 X-33.08079 Y-53.15753
G01 X-33.04124 Y-53.20403
G01 X-32.91424 Y-53.41155
G01 X-32.79039 Y-53.44041
G01 X-32.73542 Y-53.44658
G01 X-32.67934 Y-53.44973
G01 X-29.14998 Y-53.44973
G01 X-29.08201 Y-53.45496
G01 X-29.01917 Y-53.46868
G01 X-28.93728 Y-53.50200
G01 X-28.86411 Y-53.55166
G01 X-28.83157 Y-53.58163
G01 X-27.37427 Y-55.03911
G01 X-27.34425 Y-55.07383
G01 X-27.22065 Y-55.26461
G01 X-27.10518 Y-55.29290
G01 X-26.97536 Y-55.30832
G01 X-26.88092 Y-55.33842
G01 X-26.83523 Y-55.36087
G01 X-26.76378 Y-55.40644
G01 X-26.55659 Y-55.59803
G01 X-26.33035 Y-55.78173
G01 X-26.33043 Y-56.62016
G01 X-26.33035 Y-55.78173
G01 X-26.19888 Y-55.58539
G01 X-26.16391 Y-55.51551
G01 X-26.10501 Y-55.33768
G01 X-26.09231 Y-55.25935
G01 X-26.08573 Y-55.17822
G01 X-26.08573 Y-54.23700
G01 X-26.09091 Y-54.16502
G01 X-26.10191 Y-54.08869
G01 X-26.15911 Y-54.01160
G01 X-26.19535 Y-53.97236
G01 X-28.05786 Y-52.10985
G01 X-28.11234 Y-52.06263
G01 X-28.17419 Y-52.01641
G01 X-28.26929 Y-52.00233
G01 X-28.32250 Y-52.00023
G01 X-32.46999 Y-52.00023
G01 X-32.51411 Y-51.99830
G01 X-32.60095 Y-51.98181
G01 X-32.68218 Y-51.94691
G01 X-32.75610 Y-51.89863
G01 X-37.91103 Y-46.74558
G01 X-38.01283 Y-46.66300
G01 X-38.10973 Y-46.64111
G01 X-38.22688 Y-46.62086
G01 X-38.39165 Y-46.56800
G01 X-38.54547 Y-46.48906
G01 X-38.63658 Y-46.42526
G01 X-38.71473 Y-46.36026
G01 X-38.80727 Y-46.26630
G01 X-39.02606 Y-45.95899
G01 X-39.15687 Y-45.82267
G01 X-39.24051 Y-45.74517
G01 X-39.24041 Y-45.35442
G01 X-39.13437 Y-45.25571
G01 X-39.03576 Y-45.15195
G01 X-38.97089 Y-45.06798
G01 X-38.87854 Y-44.93019
G01 X-38.80803 Y-44.83481
G01 X-38.72535 Y-44.74985
G01 X-38.65644 Y-44.68960
G01 X-38.54575 Y-44.61043
G01 X-38.39165 Y-44.53194
G01 X-38.22713 Y-44.47878
G01 X-38.05642 Y-44.45178
G01 X-37.88354 Y-44.45168
G01 X-37.71278 Y-44.47857
G01 X-37.54826 Y-44.53191
G01 X-37.39411 Y-44.61058
G01 X-37.25459 Y-44.71236
G01 X-37.15393 Y-44.81121
G01 X-37.09576 Y-44.88188
G01 X-37.03061 Y-44.97433
G01 X-36.95235 Y-45.12848
G01 X-36.89886 Y-45.29282
G01 X-36.87301 Y-45.45157
G01 X-36.86988 Y-45.54304
G01 X-36.87194 Y-45.63638
G01 X-36.89866 Y-45.80717
G01 X-36.95246 Y-45.97146
G01 X-37.01146 Y-46.10138
G01 X-37.06572 Y-46.25325
G01 X-36.98779 Y-46.38025
G01 X-36.92325 Y-46.45937
G01 X-32.39311 Y-50.99007
G01 X-32.33860 Y-51.03726
G01 X-32.27677 Y-51.08351
G01 X-32.18165 Y-51.09756
G01 X-32.12844 Y-51.09969
G01 X-27.98100 Y-51.09969
G01 X-27.93680 Y-51.10160
G01 X-27.84996 Y-51.11806
G01 X-27.76825 Y-51.15199
G01 X-27.69510 Y-51.20165
G01 X-27.66261 Y-51.23157
G01 X-25.31710 Y-53.57711
G01 X-25.28700 Y-53.60949
G01 X-25.23798 Y-53.68300
G01 X-25.20358 Y-53.76446
G01 X-25.18713 Y-53.85130
G01 X-25.18522 Y-53.89550
G01 X-25.18522 Y-55.13746
G01 X-25.18004 Y-55.20939
G01 X-25.16998 Y-55.27926
G01 X-25.12111 Y-55.44210
G01 X-25.08918 Y-55.51195
G01 X-24.94237 Y-55.73679
G01 X-24.94252 Y-56.61134
G01 X-25.07201 Y-56.80530
G01 X-25.10699 Y-56.87517
G01 X-25.16597 Y-57.05315
G01 X-25.17864 Y-57.13146
G01 X-25.18522 Y-57.21251
G01 X-25.18522 Y-58.26176
G01 X-25.18004 Y-58.33372
G01 X-25.16998 Y-58.40357
G01 X-25.12114 Y-58.56628
G01 X-25.08923 Y-58.63615
G01 X-24.94179 Y-58.86181
G01 X-24.94143 Y-59.76275
G01 X-24.92835 Y-59.91586
G01 X-24.89533 Y-60.08497
G01 X-24.87874 Y-60.14601
G01 X-24.83064 Y-60.28759
G01 X-24.80569 Y-60.34862
G01 X-24.72662 Y-60.51205
G01 X-24.69249 Y-60.57308
G01 X-24.59271 Y-60.73155
G01 X-24.59271 Y-62.91049
G01 X-24.52607 Y-63.11288
G01 X-24.48588 Y-63.29794
G01 X-24.46594 Y-63.47595
G01 X-24.46279 Y-63.72187
G01 X-24.53833 Y-63.90317
G01 X-24.60468 Y-64.03967
G01 X-24.68375 Y-64.16802
G01 X-24.75517 Y-64.26312
G01 X-24.90882 Y-64.33368
G01 X-24.99955 Y-64.36545
G01 X-27.17206 Y-64.36413
G01 X-24.99955 Y-64.36545
G01 X-24.90882 Y-64.33368
G01 X-24.75517 Y-64.26312
G01 X-24.68375 Y-64.16802
G01 X-24.62030 Y-64.06746
G01 X-24.53833 Y-63.90317
G01 X-24.46279 Y-63.72187
G01 X-24.46249 Y-63.58308
G01 X-24.46594 Y-63.47595
G01 X-24.48588 Y-63.29794
G01 X-24.52607 Y-63.11288
G01 X-24.59271 Y-62.91049
G01 X-24.59271 Y-60.73155
G01 X-24.69249 Y-60.57308
G01 X-24.72662 Y-60.51205
G01 X-24.80569 Y-60.34862
G01 X-24.83064 Y-60.28759
G01 X-24.87874 Y-60.14601
G01 X-24.92050 Y-59.96681
G01 X-24.93884 Y-59.81365
G01 X-24.94270 Y-59.71139
G01 X-24.94179 Y-58.86181
G01 X-24.74143 Y-58.70357
G01 X-24.51159 Y-58.49414
G01 X-24.40356 Y-58.42988
G01 X-24.29970 Y-58.39546
G01 X-24.22304 Y-58.38774
G01 X-22.86275 Y-58.38850
G01 X-22.80831 Y-58.39445
G01 X-22.68807 Y-58.43306
G01 X-22.58865 Y-58.49374
G01 X-22.50654 Y-58.57639
G01 X-22.44514 Y-58.67540
G01 X-22.43303 Y-58.70783
G01 X-22.40816 Y-58.78779
G01 X-22.40057 Y-58.85025
G01 X-22.39983 Y-59.72266
G01 X-22.40913 Y-59.81195
G01 X-22.43676 Y-59.90166
G01 X-22.46356 Y-59.95652
G01 X-22.50674 Y-60.02340
G01 X-22.58901 Y-60.10575
G01 X-22.64268 Y-60.14113
G01 X-22.68769 Y-60.16696
G01 X-22.73498 Y-60.18431
G01 X-22.94573 Y-60.24141
G01 X-23.03905 Y-60.27339
G01 X-23.08162 Y-60.41845
G01 X-23.09752 Y-60.52048
G01 X-23.09970 Y-64.10000
G01 X-23.11794 Y-64.44595
G01 X-23.01050 Y-64.49342
G01 X-22.85650 Y-64.53675
G01 X-22.79188 Y-64.54531
G01 X-22.72554 Y-64.54973
G01 X-22.44151 Y-64.54973
G01 X-22.36955 Y-64.54455
G01 X-22.29315 Y-64.53353
G01 X-22.21599 Y-64.47622
G01 X-22.17687 Y-64.44010
G01 X-20.23484 Y-62.49810
G01 X-20.18759 Y-62.44351
G01 X-20.14142 Y-62.38176
G01 X-20.12737 Y-62.28690
G01 X-20.12524 Y-62.23348
G01 X-20.12524 Y-60.53013
G01 X-20.13039 Y-60.45815
G01 X-20.14045 Y-60.38830
G01 X-20.18508 Y-60.23501
G01 X-20.30512 Y-60.19185
G01 X-20.44096 Y-60.15482
G01 X-20.51160 Y-60.13000
G01 X-20.61129 Y-60.06871
G01 X-20.67814 Y-60.00272
G01 X-20.69369 Y-59.98629
G01 X-20.75480 Y-59.88705
G01 X-20.79201 Y-59.77471
G01 X-20.79897 Y-59.71220
G01 X-20.79925 Y-58.83775
G01 X-20.79130 Y-58.77540
G01 X-20.75480 Y-58.66290
G01 X-20.69369 Y-58.56366
G01 X-20.61129 Y-58.48124
G01 X-20.51210 Y-58.42008
G01 X-20.39968 Y-58.38299
G01 X-20.29996 Y-58.37474
G01 X-19.04995 Y-58.37474
G01 X-18.95036 Y-58.38342
G01 X-18.83263 Y-58.42343
G01 X-18.73911 Y-58.48185
G01 X-18.68930 Y-58.52871
G01 X-18.65656 Y-58.56389
G01 X-18.62407 Y-58.61345
G01 X-18.51292 Y-58.80905
G01 X-18.37947 Y-58.84139
G01 X-18.26829 Y-58.85073
G01 X-17.10264 Y-58.85073
G01 X-16.96080 Y-58.83549
G01 X-16.86687 Y-58.81352
G01 X-16.74071 Y-58.60504
G01 X-16.70116 Y-58.55853
G01 X-16.65709 Y-58.51578
G01 X-16.60723 Y-58.48050
G01 X-16.54889 Y-58.44654
G01 X-16.43662 Y-58.40926
G01 X-16.33698 Y-58.40072
G01 X-15.05377 Y-58.40181
G01 X-14.98737 Y-58.40943
G01 X-14.87534 Y-58.44713
G01 X-14.77640 Y-58.50816
G01 X-14.69367 Y-58.58995
G01 X-14.66111 Y-58.63941
G01 X-14.55011 Y-58.83341
G01 X-14.41770 Y-58.86539
G01 X-14.30655 Y-58.87471
G01 X-12.26650 Y-58.87471
G01 X-12.19452 Y-58.86953
G01 X-12.11817 Y-58.85851
G01 X-12.04113 Y-58.80133
G01 X-11.54595 Y-58.31152
G01 X-11.47247 Y-58.26237
G01 X-11.39089 Y-58.22846
G01 X-11.31095 Y-58.21200
G01 X-11.25995 Y-58.20971
G01 X-9.63953 Y-58.20971
G01 X-9.56755 Y-58.20453
G01 X-9.43549 Y-58.18182
G01 X-9.36087 Y-58.08955
G01 X-9.25332 Y-57.94482
G01 X-9.15853 Y-57.84769
G01 X-9.06354 Y-57.77123
G01 X-8.88106 Y-57.64642
G01 X-8.80197 Y-57.58421
G01 X-8.61192 Y-57.38983
G01 X-8.68365 Y-57.31114
G01 X-8.83062 Y-57.17177
G01 X-8.89866 Y-57.12082
G01 X-9.09066 Y-56.98899
G01 X-9.16971 Y-56.92173
G01 X-9.25363 Y-56.83540
G01 X-9.34642 Y-56.70969
G01 X-9.43740 Y-56.59869
G01 X-9.54710 Y-56.57667
G01 X-9.63953 Y-56.57022
G01 X-14.27953 Y-56.57022
G01 X-14.35151 Y-56.57540
G01 X-14.42139 Y-56.58543
G01 X-14.54127 Y-56.61650
G01 X-14.63061 Y-56.81030
G01 X-14.69365 Y-56.91195
G01 X-14.74097 Y-56.96146
G01 X-14.79533 Y-57.00738
G01 X-14.87526 Y-57.05505
G01 X-14.97076 Y-57.08782
G01 X-15.04978 Y-57.10019
G01 X-15.08237 Y-57.10121
G01 X-16.37414 Y-57.09996
G01 X-16.43662 Y-57.09270
G01 X-16.54904 Y-57.05577
G01 X-16.58128 Y-57.03753
G01 X-16.64818 Y-56.99458
G01 X-16.72235 Y-56.92127
G01 X-16.74660 Y-56.88853
G01 X-16.79182 Y-56.81307
G01 X-16.82903 Y-56.70070
G01 X-16.83639 Y-56.63816
G01 X-16.83723 Y-55.80103
G01 X-16.82903 Y-55.70126
G01 X-16.79154 Y-55.58902
G01 X-16.73065 Y-55.48970
G01 X-16.64813 Y-55.40743
G01 X-16.58105 Y-55.36428
G01 X-16.54526 Y-55.34477
G01 X-16.46817 Y-55.31808
G01 X-16.43667 Y-55.30898
G01 X-16.37421 Y-55.30144
G01 X-15.08707 Y-55.30073
G01 X-14.98727 Y-55.30901
G01 X-14.87490 Y-55.34617
G01 X-14.77567 Y-55.40723
G01 X-14.69327 Y-55.48973
G01 X-14.58189 Y-55.63956
G01 X-14.48245 Y-55.66039
G01 X-14.37130 Y-55.66971
G01 X-9.63953 Y-55.66971
G01 X-9.56755 Y-55.66453
G01 X-9.43679 Y-55.64215
G01 X-9.36397 Y-55.55381
G01 X-9.25368 Y-55.40451
G01 X-9.15071 Y-55.29999
G01 X-9.07900 Y-55.24195
G01 X-8.99173 Y-55.18041
G01 X-8.90324 Y-55.13357
G01 X-8.80837 Y-55.09141
G01 X-8.65201 Y-55.04444
G01 X-8.50240 Y-55.02178
G01 X-8.32948 Y-55.02151
G01 X-8.15881 Y-55.04878
G01 X-7.99445 Y-55.10233
G01 X-7.84025 Y-55.18048
G01 X-7.70062 Y-55.28241
G01 X-7.57819 Y-55.40446
G01 X-7.47680 Y-55.54442
G01 X-7.39831 Y-55.69844
G01 X-7.34449 Y-55.86273
G01 X-7.31802 Y-56.03357
G01 X-7.31594 Y-56.09907
G01 X-7.31757 Y-56.20644
G01 X-7.34457 Y-56.37720
G01 X-7.37865 Y-56.48693
G01 X-7.41833 Y-56.58444
G01 X-7.47670 Y-56.69557
G01 X-7.57807 Y-56.83560
G01 X-7.70578 Y-56.96196
G01 X-7.78929 Y-57.02379
G01 X-7.96445 Y-57.14375
G01 X-8.05178 Y-57.21594
G01 X-8.21988 Y-57.39016
G01 X-8.61192 Y-57.38983
G01 X-8.21988 Y-57.39016
G01 X-8.11073 Y-57.50557
G01 X-8.00822 Y-57.60237
G01 X-7.94159 Y-57.65345
G01 X-7.78607 Y-57.75841
G01 X-7.69971 Y-57.82267
G01 X-7.62026 Y-57.90004
G01 X-7.55897 Y-57.96902
G01 X-7.47670 Y-58.08436
G01 X-7.41833 Y-58.19544
G01 X-7.38241 Y-58.28193
G01 X-7.34449 Y-58.40273
G01 X-7.31802 Y-58.57357
G01 X-7.31795 Y-58.74639
G01 X-7.34464 Y-58.91718
G01 X-7.39862 Y-59.08137
G01 X-7.47647 Y-59.23572
G01 X-7.57840 Y-59.37532
G01 X-7.70011 Y-59.49681
G01 X-7.82051 Y-59.58535
G01 X-7.95051 Y-59.67382
G01 X-8.02727 Y-59.73346
G01 X-8.08566 Y-59.78876
G01 X-8.22036 Y-59.92967
G01 X-8.15996 Y-59.99678
G01 X-8.03915 Y-60.11448
G01 X-7.96527 Y-60.17671
G01 X-7.78734 Y-60.29754
G01 X-7.69971 Y-60.36267
G01 X-7.57840 Y-60.48464
G01 X-7.47644 Y-60.62421
G01 X-7.43595 Y-60.70013
G01 X-7.39168 Y-60.79564
G01 X-7.34490 Y-60.94283
G01 X-7.31744 Y-61.11352
G01 X-7.31607 Y-61.23165
G01 X-7.32409 Y-61.33678
G01 X-7.34482 Y-61.45715
G01 X-7.37083 Y-61.54336
G01 X-7.40169 Y-61.62952
G01 X-7.47682 Y-61.77549
G01 X-7.57807 Y-61.91560
G01 X-7.66420 Y-62.00361
G01 X-7.74464 Y-62.07148
G01 X-8.00829 Y-62.25741
G01 X-8.07367 Y-62.31738
G01 X-8.22010 Y-62.46998
G01 X-8.11043 Y-62.58629
G01 X-8.03915 Y-62.65448
G01 X-7.96527 Y-62.71671
G01 X-7.78734 Y-62.83754
G01 X-7.69971 Y-62.90267
G01 X-7.57840 Y-63.02464
G01 X-7.47644 Y-63.16421
G01 X-7.39826 Y-63.31842
G01 X-7.34490 Y-63.48283
G01 X-7.31744 Y-63.65352
G01 X-7.31607 Y-63.77165
G01 X-7.32409 Y-63.87678
G01 X-7.34482 Y-63.99715
G01 X-7.39816 Y-64.16149
G01 X-7.47682 Y-64.31549
G01 X-7.57807 Y-64.45560
G01 X-7.69999 Y-64.57696
G01 X-8.00829 Y-64.79741
G01 X-8.07367 Y-64.85738
G01 X-8.22010 Y-65.00998
G01 X-8.07367 Y-64.85738
G01 X-8.00829 Y-64.79741
G01 X-7.69999 Y-64.57696
G01 X-7.57807 Y-64.45560
G01 X-7.51756 Y-64.37500
G01 X-7.47682 Y-64.31549
G01 X-7.44916 Y-64.26530
G01 X-7.39816 Y-64.16149
G01 X-7.37083 Y-64.08336
G01 X-7.34482 Y-63.99715
G01 X-7.33700 Y-63.95712
G01 X-7.31787 Y-63.82642
G01 X-7.31586 Y-63.74773
G01 X-7.31744 Y-63.65352
G01 X-7.33428 Y-63.53820
G01 X-7.35150 Y-63.45870
G01 X-7.39826 Y-63.31842
G01 X-7.43595 Y-63.24013
G01 X-7.48825 Y-63.14689
G01 X-7.57840 Y-63.02464
G01 X-7.69971 Y-62.90267
G01 X-7.78734 Y-62.83754
G01 X-7.96527 Y-62.71671
G01 X-8.03915 Y-62.65448
G01 X-8.11043 Y-62.58629
G01 X-8.22010 Y-62.46998
G01 X-11.99193 Y-62.46937
G01 X-12.36617 Y-62.74788
G01 X-12.65337 Y-62.97958
G01 X-12.36617 Y-62.74788
G01 X-11.99193 Y-62.46937
G01 X-11.59139 Y-61.90767
G01 X-11.14773 Y-61.25741
G01 X-10.84202 Y-60.77791
G01 X-10.56803 Y-60.33115
G01 X-10.34730 Y-60.19013
G01 X-10.21601 Y-60.11321
G01 X-10.02206 Y-60.00963
G01 X-9.85447 Y-59.92945
G01 X-8.22036 Y-59.92967
G01 X-9.85447 Y-59.92945
G01 X-10.02206 Y-60.00963
G01 X-10.21601 Y-60.11321
G01 X-10.34730 Y-60.19013
G01 X-10.56803 Y-60.33115
G01 X-10.84202 Y-60.77791
G01 X-11.14773 Y-61.25741
G01 X-11.59139 Y-61.90767
G01 X-11.99193 Y-62.46937
G01 X-12.36617 Y-62.74788
G01 X-12.65337 Y-62.97958
G01 X-13.31910 Y-63.15837
G01 X-14.00866 Y-63.57170
G01 X-14.39111 Y-63.61389
G01 X-14.72890 Y-63.63729
G01 X-15.07447 Y-64.17160
G01 X-15.37391 Y-64.59781
G01 X-15.45527 Y-64.70736
G01 X-15.69276 Y-65.01214
G01 X-15.97574 Y-65.34594
G01 X-16.23030 Y-65.61902
G01 X-16.31165 Y-65.70086
G01 X-16.54272 Y-65.91894
G01 X-16.75425 Y-66.09997
G01 X-16.95021 Y-66.25181
G01 X-17.13210 Y-66.37904
G01 X-17.38206 Y-66.53246
G01 X-17.61594 Y-66.65349
G01 X-17.82003 Y-66.74132
G01 X-18.03616 Y-66.81627
G01 X-18.21312 Y-66.86380
G01 X-18.41930 Y-66.90347
G01 X-18.58221 Y-66.92288
G01 X-18.79684 Y-66.93225
G01 X-18.99184 Y-66.92494
G01 X-19.16694 Y-66.90497
G01 X-27.70310 Y-66.90629
G01 X-27.81557 Y-67.07436
G01 X-28.00421 Y-67.39120
G01 X-28.09939 Y-67.53990
G01 X-28.21346 Y-67.70169
G01 X-28.36215 Y-67.90085
G01 X-28.61999 Y-67.80611
G01 X-29.24996 Y-67.54518
G01 X-29.49509 Y-67.30428
G01 X-29.69994 Y-67.13654
G01 X-29.74081 Y-67.10769
G01 X-29.90098 Y-67.00964
G01 X-29.94183 Y-66.98849
G01 X-30.07467 Y-66.93045
G01 X-30.14792 Y-66.90507
G01 X-31.92498 Y-66.90497
G01 X-32.03329 Y-66.89816
G01 X-32.14060 Y-66.88049
G01 X-32.22407 Y-66.85885
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-30.07490 Y-63.88941 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-30.07490 Y-63.88941
G01 X-30.07543 Y-63.55875
G01 X-30.07665 Y-63.52423
G01 X-30.08234 Y-63.50010
G01 X-30.10609 Y-63.42139
G01 X-30.12042 Y-63.39423
G01 X-30.15808 Y-63.33416
G01 X-30.22872 Y-63.26248
G01 X-30.31539 Y-63.21120
G01 X-30.41917 Y-63.18197
G01 X-30.95844 Y-63.17978
G01 X-31.01190 Y-63.17762
G01 X-31.10670 Y-63.16358
G01 X-31.16855 Y-63.11735
G01 X-31.22308 Y-63.07010
G01 X-33.27565 Y-61.01806
G01 X-33.29915 Y-60.99724
G01 X-33.36740 Y-60.95230
G01 X-33.44898 Y-60.91817
G01 X-33.53575 Y-60.90100
G01 X-33.56948 Y-60.89985
G01 X-42.14996 Y-60.89973
G01 X-42.19415 Y-60.90135
G01 X-42.28079 Y-60.91870
G01 X-42.33990 Y-60.94227
G01 X-42.36268 Y-60.95202
G01 X-42.40261 Y-60.97786
G01 X-42.43586 Y-61.00168
G01 X-42.46850 Y-61.03175
G01 X-44.43974 Y-63.00473
G01 X-44.49697 Y-63.08778
G01 X-44.53184 Y-63.16896
G01 X-44.54830 Y-63.25583
G01 X-44.55023 Y-63.29995
G01 X-44.55023 Y-69.79996
G01 X-44.54500 Y-69.86791
G01 X-44.53138 Y-69.93082
G01 X-44.52112 Y-69.95871
G01 X-44.49763 Y-70.01251
G01 X-44.47883 Y-70.04279
G01 X-44.44866 Y-70.08612
G01 X-44.41835 Y-70.11833
G01 X-43.31836 Y-71.21832
G01 X-43.28079 Y-71.25269
G01 X-43.20695 Y-71.30039
G01 X-43.13083 Y-71.33138
G01 X-43.06791 Y-71.34499
G01 X-43.02636 Y-71.34954
G01 X-41.22331 Y-71.35023
G01 X-41.11227 Y-71.35952
G01 X-40.98359 Y-71.39010
G01 X-40.87297 Y-71.57834
G01 X-40.84285 Y-71.62310
G01 X-40.78504 Y-71.68375
G01 X-40.73736 Y-71.72188
G01 X-40.66169 Y-71.76656
G01 X-40.54950 Y-71.80364
G01 X-40.46535 Y-71.81248
G01 X-39.15006 Y-71.81271
G01 X-39.05032 Y-71.80420
G01 X-38.93825 Y-71.76656
G01 X-38.86683 Y-71.72485
G01 X-38.82606 Y-71.69437
G01 X-38.78578 Y-71.65492
G01 X-38.74623 Y-71.60842
G01 X-38.61715 Y-71.38899
G01 X-38.51844 Y-71.36544
G01 X-38.37663 Y-71.35023
G01 X-36.94062 Y-71.35023
G01 X-36.82955 Y-71.35952
G01 X-36.70534 Y-71.38850
G01 X-36.56869 Y-71.61129
G01 X-36.48614 Y-71.69351
G01 X-36.38682 Y-71.75431
G01 X-36.27461 Y-71.79153
G01 X-36.17496 Y-71.80024
G01 X-34.88777 Y-71.79904
G01 X-34.82526 Y-71.79198
G01 X-34.71289 Y-71.75477
G01 X-34.61375 Y-71.69356
G01 X-34.54339 Y-71.62376
G01 X-34.50199 Y-71.56590
G01 X-34.47034 Y-71.51197
G01 X-34.44504 Y-71.44088
G01 X-34.43311 Y-71.39965
G01 X-34.42472 Y-71.29998
G01 X-34.42472 Y-70.49999
G01 X-34.43311 Y-70.40029
G01 X-34.47316 Y-70.28259
G01 X-34.53128 Y-70.18868
G01 X-34.56775 Y-70.15005
G01 X-34.61418 Y-70.10692
G01 X-34.71289 Y-70.04517
G01 X-34.82533 Y-70.00827
G01 X-34.88777 Y-70.00100
G01 X-36.18987 Y-69.99996
G01 X-36.27451 Y-70.00880
G01 X-36.38670 Y-70.04591
G01 X-36.46661 Y-70.09356
G01 X-36.52096 Y-70.13948
G01 X-36.56828 Y-70.18899
G01 X-36.70422 Y-70.41231
G01 X-36.79879 Y-70.43448
G01 X-36.86864 Y-70.44454
G01 X-36.94062 Y-70.44972
G01 X-38.37663 Y-70.44972
G01 X-38.48768 Y-70.44040
G01 X-38.61623 Y-70.40987
G01 X-38.74623 Y-70.19155
G01 X-38.78578 Y-70.14505
G01 X-38.82596 Y-70.10565
G01 X-38.86675 Y-70.07515
G01 X-38.93825 Y-70.03341
G01 X-39.05032 Y-69.99577
G01 X-39.14999 Y-69.98724
G01 X-40.48720 Y-69.98828
G01 X-40.55143 Y-69.99635
G01 X-40.66159 Y-70.03362
G01 X-40.76055 Y-70.09468
G01 X-40.84330 Y-70.17649
G01 X-40.87584 Y-70.22589
G01 X-40.98270 Y-70.41091
G01 X-41.08151 Y-70.43448
G01 X-41.22331 Y-70.44972
G01 X-42.68513 Y-70.44898
G01 X-42.80678 Y-70.43351
G01 X-42.86860 Y-70.38729
G01 X-42.92308 Y-70.34009
G01 X-43.57622 Y-69.68396
G01 X-43.63352 Y-69.60677
G01 X-43.64454 Y-69.53039
G01 X-43.64973 Y-69.45846
G01 X-43.64973 Y-63.64150
G01 X-43.64759 Y-63.58829
G01 X-43.63352 Y-63.49314
G01 X-43.58729 Y-63.43134
G01 X-43.54010 Y-63.37686
G01 X-42.07310 Y-61.90983
G01 X-42.03370 Y-61.87351
G01 X-41.95676 Y-61.81641
G01 X-41.88044 Y-61.80541
G01 X-41.80848 Y-61.80023
G01 X-33.92150 Y-61.80023
G01 X-33.86829 Y-61.80237
G01 X-33.77319 Y-61.81641
G01 X-33.71144 Y-61.86256
G01 X-33.65686 Y-61.90983
G01 X-32.41835 Y-63.14836
G01 X-32.33918 Y-63.24382
G01 X-32.28279 Y-63.33287
G01 X-32.32303 Y-63.52418
G01 X-32.32453 Y-63.90150
G01 X-32.32315 Y-63.93701
G01 X-32.31762 Y-63.95984
G01 X-32.29361 Y-64.03919
G01 X-32.25305 Y-64.10963
G01 X-32.06067 Y-64.36497
G01 X-30.33913 Y-64.36523
G01 X-30.18013 Y-64.15712
G01 X-30.10596 Y-64.03889
G01 X-30.07711 Y-63.93685
G01 X-30.07490 Y-63.88941
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-34.17499 Y-64.88618 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-34.17499 Y-64.88618
G01 X-34.17499 Y-64.69997
G01 X-34.62503 Y-64.69997
G01 X-34.62521 Y-64.84772
G01 X-34.64024 Y-64.92756
G01 X-34.65833 Y-64.96858
G01 X-34.68284 Y-65.00609
G01 X-34.71352 Y-65.03944
G01 X-34.75396 Y-65.07038
G01 X-34.81428 Y-65.09863
G01 X-34.88467 Y-65.11201
G01 X-35.27496 Y-65.11247
G01 X-35.27496 Y-65.56248
G01 X-34.85127 Y-65.56248
G01 X-34.75254 Y-65.55237
G01 X-34.59148 Y-65.49901
G01 X-34.44723 Y-65.41003
G01 X-34.32742 Y-65.29022
G01 X-34.23844 Y-65.14597
G01 X-34.18508 Y-64.98491
G01 X-34.17499 Y-64.88618
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-34.17499 Y-64.14996 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-34.17499 Y-64.14996
G01 X-34.17499 Y-63.96378
G01 X-34.18508 Y-63.86505
G01 X-34.23844 Y-63.70399
G01 X-34.32742 Y-63.55974
G01 X-34.44723 Y-63.43990
G01 X-34.59148 Y-63.35093
G01 X-34.75254 Y-63.29756
G01 X-34.85127 Y-63.28748
G01 X-35.27496 Y-63.28748
G01 X-35.27496 Y-63.73752
G01 X-34.88467 Y-63.73795
G01 X-34.81428 Y-63.75136
G01 X-34.75396 Y-63.77960
G01 X-34.71352 Y-63.81051
G01 X-34.68284 Y-63.84389
G01 X-34.65833 Y-63.88141
G01 X-34.64024 Y-63.92240
G01 X-34.62521 Y-64.00226
G01 X-34.62503 Y-64.14996
G01 X-34.17499 Y-64.14996
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-35.82498 Y-65.56248 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-35.82498 Y-65.56248
G01 X-35.82498 Y-65.11247
G01 X-36.21530 Y-65.11201
G01 X-36.28568 Y-65.09863
G01 X-36.34560 Y-65.07069
G01 X-36.38157 Y-65.04391
G01 X-36.41268 Y-65.01168
G01 X-36.43839 Y-64.97434
G01 X-36.45952 Y-64.92804
G01 X-36.47478 Y-64.84772
G01 X-36.47496 Y-64.69997
G01 X-36.92497 Y-64.69997
G01 X-36.92497 Y-64.88618
G01 X-36.91489 Y-64.98491
G01 X-36.86150 Y-65.14597
G01 X-36.77255 Y-65.29022
G01 X-36.65271 Y-65.41003
G01 X-36.50846 Y-65.49901
G01 X-36.34740 Y-65.55237
G01 X-36.24867 Y-65.56248
G01 X-35.82498 Y-65.56248
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-35.82498 Y-63.73752 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-35.82498 Y-63.73752
G01 X-35.82498 Y-63.28748
G01 X-36.24867 Y-63.28748
G01 X-36.34740 Y-63.29756
G01 X-36.50846 Y-63.35093
G01 X-36.65271 Y-63.43990
G01 X-36.77255 Y-63.55974
G01 X-36.86150 Y-63.70399
G01 X-36.91489 Y-63.86505
G01 X-36.92497 Y-63.96378
G01 X-36.92497 Y-64.14996
G01 X-36.47496 Y-64.14996
G01 X-36.47478 Y-64.00226
G01 X-36.45952 Y-63.92194
G01 X-36.43839 Y-63.87564
G01 X-36.41268 Y-63.83830
G01 X-36.38157 Y-63.80604
G01 X-36.34560 Y-63.77930
G01 X-36.28568 Y-63.75136
G01 X-36.21530 Y-63.73795
G01 X-35.82498 Y-63.73752
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-38.12998 Y-64.90617 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-38.12998 Y-64.90617
G01 X-38.12998 Y-64.62499
G01 X-38.58001 Y-64.62499
G01 X-38.58019 Y-64.86771
G01 X-38.59360 Y-64.94221
G01 X-38.61659 Y-64.99433
G01 X-38.65657 Y-65.04765
G01 X-38.71329 Y-65.09304
G01 X-38.76345 Y-65.11674
G01 X-38.80681 Y-65.12817
G01 X-38.84989 Y-65.13243
G01 X-39.52497 Y-65.13248
G01 X-39.52497 Y-65.58247
G01 X-38.80628 Y-65.58247
G01 X-38.70755 Y-65.57239
G01 X-38.54648 Y-65.51902
G01 X-38.40224 Y-65.43004
G01 X-38.28240 Y-65.31021
G01 X-38.19345 Y-65.16596
G01 X-38.14006 Y-65.00490
G01 X-38.12998 Y-64.90617
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-38.12998 Y-64.07498 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-38.12998 Y-64.07498
G01 X-38.12998 Y-63.79378
G01 X-38.14006 Y-63.69505
G01 X-38.19345 Y-63.53399
G01 X-38.28240 Y-63.38974
G01 X-38.40224 Y-63.26990
G01 X-38.54648 Y-63.18095
G01 X-38.70755 Y-63.12756
G01 X-38.80628 Y-63.11748
G01 X-39.52497 Y-63.11748
G01 X-39.52497 Y-63.56749
G01 X-38.84989 Y-63.56754
G01 X-38.80681 Y-63.57183
G01 X-38.76345 Y-63.58324
G01 X-38.70427 Y-63.61267
G01 X-38.66043 Y-63.64831
G01 X-38.61948 Y-63.70084
G01 X-38.59546 Y-63.75194
G01 X-38.58019 Y-63.83228
G01 X-38.58001 Y-64.07498
G01 X-38.12998 Y-64.07498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-40.07498 Y-65.58247 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-40.07498 Y-65.58247
G01 X-40.07498 Y-65.13248
G01 X-40.75009 Y-65.13243
G01 X-40.79317 Y-65.12817
G01 X-40.83652 Y-65.11674
G01 X-40.89141 Y-65.09007
G01 X-40.93914 Y-65.05199
G01 X-40.98049 Y-64.99913
G01 X-41.00452 Y-64.94803
G01 X-41.01978 Y-64.86771
G01 X-41.01996 Y-64.62499
G01 X-41.46997 Y-64.62499
G01 X-41.46997 Y-64.90617
G01 X-41.45989 Y-65.00490
G01 X-41.40650 Y-65.16596
G01 X-41.31755 Y-65.31021
G01 X-41.19771 Y-65.43004
G01 X-41.05346 Y-65.51902
G01 X-40.89240 Y-65.57239
G01 X-40.79367 Y-65.58247
G01 X-40.07498 Y-65.58247
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-40.07498 Y-63.56749 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-40.07498 Y-63.56749
G01 X-40.07498 Y-63.11748
G01 X-40.79367 Y-63.11748
G01 X-40.89240 Y-63.12756
G01 X-41.05346 Y-63.18093
G01 X-41.19771 Y-63.26990
G01 X-41.31755 Y-63.38974
G01 X-41.40650 Y-63.53399
G01 X-41.45989 Y-63.69505
G01 X-41.46997 Y-63.79378
G01 X-41.46997 Y-64.07498
G01 X-41.01996 Y-64.07498
G01 X-41.01978 Y-63.83228
G01 X-41.00452 Y-63.75194
G01 X-40.98049 Y-63.70084
G01 X-40.93955 Y-63.64831
G01 X-40.89571 Y-63.61267
G01 X-40.83652 Y-63.58324
G01 X-40.79317 Y-63.57183
G01 X-40.75009 Y-63.56754
G01 X-40.07498 Y-63.56749
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-34.34497 Y-58.12498 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-34.34497 Y-58.12498
G01 X-34.34497 Y-57.67497
G01 X-34.71030 Y-57.67451
G01 X-34.78068 Y-57.66112
G01 X-34.84060 Y-57.63318
G01 X-34.87657 Y-57.60641
G01 X-34.90768 Y-57.57418
G01 X-34.93339 Y-57.53684
G01 X-34.95452 Y-57.49054
G01 X-34.96978 Y-57.41022
G01 X-34.96996 Y-57.27499
G01 X-35.41997 Y-57.27499
G01 X-35.41997 Y-57.44868
G01 X-35.40989 Y-57.54741
G01 X-35.35650 Y-57.70847
G01 X-35.26755 Y-57.85272
G01 X-35.14771 Y-57.97255
G01 X-35.00346 Y-58.06150
G01 X-34.84240 Y-58.11487
G01 X-34.74367 Y-58.12498
G01 X-34.34497 Y-58.12498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-32.71998 Y-57.44868 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-32.71998 Y-57.44868
G01 X-32.71998 Y-57.27499
G01 X-33.17002 Y-57.27499
G01 X-33.17019 Y-57.41022
G01 X-33.18543 Y-57.49054
G01 X-33.20659 Y-57.53684
G01 X-33.23230 Y-57.57418
G01 X-33.26341 Y-57.60641
G01 X-33.29938 Y-57.63318
G01 X-33.35930 Y-57.66112
G01 X-33.42965 Y-57.67451
G01 X-33.79496 Y-57.67497
G01 X-33.79496 Y-58.12498
G01 X-33.39628 Y-58.12498
G01 X-33.29755 Y-58.11487
G01 X-33.13649 Y-58.06150
G01 X-32.99224 Y-57.97255
G01 X-32.87240 Y-57.85272
G01 X-32.78343 Y-57.70847
G01 X-32.73006 Y-57.54741
G01 X-32.71998 Y-57.44868
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-32.71998 Y-56.72496 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-32.71998 Y-56.72496
G01 X-32.71998 Y-56.55127
G01 X-32.73006 Y-56.45257
G01 X-32.78343 Y-56.29148
G01 X-32.87240 Y-56.14723
G01 X-32.99224 Y-56.02740
G01 X-33.13649 Y-55.93845
G01 X-33.29755 Y-55.88508
G01 X-33.39628 Y-55.87497
G01 X-33.79496 Y-55.87497
G01 X-33.79496 Y-56.32501
G01 X-33.42965 Y-56.32547
G01 X-33.35930 Y-56.33885
G01 X-33.29938 Y-56.36679
G01 X-33.26341 Y-56.39356
G01 X-33.23230 Y-56.42580
G01 X-33.20659 Y-56.46313
G01 X-33.18543 Y-56.50944
G01 X-33.17019 Y-56.58975
G01 X-33.17002 Y-56.72496
G01 X-32.71998 Y-56.72496
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-34.34497 Y-56.32501 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-34.34497 Y-56.32501
G01 X-34.34497 Y-55.87497
G01 X-34.74367 Y-55.87497
G01 X-34.84240 Y-55.88508
G01 X-35.00346 Y-55.93845
G01 X-35.14771 Y-56.02740
G01 X-35.26755 Y-56.14723
G01 X-35.35650 Y-56.29148
G01 X-35.40989 Y-56.45254
G01 X-35.41997 Y-56.55127
G01 X-35.41997 Y-56.72496
G01 X-34.96996 Y-56.72496
G01 X-34.96978 Y-56.58975
G01 X-34.95452 Y-56.50944
G01 X-34.93339 Y-56.46313
G01 X-34.90768 Y-56.42580
G01 X-34.87657 Y-56.39356
G01 X-34.84060 Y-56.36679
G01 X-34.78068 Y-56.33885
G01 X-34.71030 Y-56.32547
G01 X-34.34497 Y-56.32501
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-36.96086 Y-52.32499 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-36.96086 Y-52.32499
G01 X-36.99686 Y-52.45021
G01 X-37.07720 Y-52.58605
G01 X-37.18888 Y-52.69774
G01 X-37.32477 Y-52.77810
G01 X-37.47699 Y-52.82232
G01 X-37.88746 Y-52.82496
G01 X-37.88746 Y-52.37490
G01 X-37.55068 Y-52.37328
G01 X-37.49434 Y-52.35529
G01 X-37.45472 Y-52.32499
G01 X-36.96086 Y-52.32499
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-36.96086 Y-51.77498 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-36.96086 Y-51.77498
G01 X-36.99686 Y-51.64976
G01 X-37.07720 Y-51.51387
G01 X-37.18888 Y-51.40221
G01 X-37.32480 Y-51.32182
G01 X-37.47699 Y-51.27760
G01 X-37.88746 Y-51.27498
G01 X-37.88746 Y-51.72507
G01 X-37.55068 Y-51.72669
G01 X-37.49434 Y-51.74468
G01 X-37.45472 Y-51.77498
G01 X-36.96086 Y-51.77498
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-38.43749 Y-51.72507 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-38.43749 Y-51.72507
G01 X-38.43749 Y-51.27498
G01 X-38.81466 Y-51.27498
G01 X-38.84796 Y-51.27760
G01 X-39.00018 Y-51.32182
G01 X-39.13607 Y-51.40218
G01 X-39.24775 Y-51.51387
G01 X-39.32809 Y-51.64976
G01 X-39.36408 Y-51.77498
G01 X-38.87026 Y-51.77498
G01 X-38.83063 Y-51.74468
G01 X-38.77430 Y-51.72669
G01 X-38.43749 Y-51.72507
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-39.78664 Y-46.66221 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-39.78664 Y-46.66221
G01 X-39.81552 Y-46.68322
G01 X-40.00135 Y-46.77788
G01 X-40.19969 Y-46.84232
G01 X-40.40569 Y-46.87496
G01 X-40.61425 Y-46.87496
G01 X-40.82024 Y-46.84232
G01 X-41.01862 Y-46.77788
G01 X-41.20444 Y-46.68322
G01 X-41.23332 Y-46.66224
G01 X-40.90221 Y-46.33112
G01 X-40.81846 Y-46.36877
G01 X-40.71851 Y-46.39973
G01 X-40.61854 Y-46.41820
G01 X-40.51110 Y-46.42495
G01 X-40.40663 Y-46.41883
G01 X-40.30655 Y-46.40097
G01 X-40.20640 Y-46.37060
G01 X-40.11778 Y-46.33107
G01 X-39.78664 Y-46.66221
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-39.78664 Y-44.43773 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-39.78664 Y-44.43773
G01 X-39.81552 Y-44.41673
G01 X-40.00135 Y-44.32206
G01 X-40.19969 Y-44.25762
G01 X-40.40569 Y-44.22498
G01 X-40.61425 Y-44.22498
G01 X-40.82024 Y-44.25762
G01 X-41.01862 Y-44.32206
G01 X-41.20444 Y-44.41673
G01 X-41.23332 Y-44.43771
G01 X-40.90218 Y-44.76885
G01 X-40.82133 Y-44.73230
G01 X-40.71851 Y-44.70024
G01 X-40.61557 Y-44.68142
G01 X-40.51110 Y-44.67504
G01 X-40.40960 Y-44.68081
G01 X-40.30363 Y-44.69971
G01 X-40.20640 Y-44.72937
G01 X-40.11780 Y-44.76890
G01 X-39.78664 Y-44.43773
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-46.47448 Y-43.12397 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-46.47448 Y-43.12397
G01 X-46.47448 Y-42.87599
G01 X-46.51327 Y-42.63106
G01 X-46.58990 Y-42.39519
G01 X-46.70248 Y-42.17421
G01 X-46.84825 Y-41.97363
G01 X-47.02361 Y-41.79824
G01 X-47.22422 Y-41.65247
G01 X-47.44517 Y-41.53992
G01 X-47.68104 Y-41.46329
G01 X-47.92599 Y-41.42448
G01 X-48.17397 Y-41.42448
G01 X-48.41891 Y-41.46329
G01 X-48.65477 Y-41.53992
G01 X-48.87572 Y-41.65247
G01 X-49.07633 Y-41.79824
G01 X-49.25170 Y-41.97360
G01 X-49.39747 Y-42.17421
G01 X-49.51004 Y-42.39519
G01 X-49.58667 Y-42.63106
G01 X-49.62546 Y-42.87599
G01 X-49.62546 Y-43.12397
G01 X-49.58667 Y-43.36890
G01 X-49.51004 Y-43.60476
G01 X-49.39747 Y-43.82572
G01 X-49.25170 Y-44.02633
G01 X-49.07633 Y-44.20171
G01 X-48.87572 Y-44.34746
G01 X-48.65477 Y-44.46003
G01 X-48.41891 Y-44.53666
G01 X-48.17397 Y-44.57548
G01 X-47.92599 Y-44.57548
G01 X-47.68104 Y-44.53666
G01 X-47.44517 Y-44.46003
G01 X-47.22422 Y-44.34746
G01 X-47.02361 Y-44.20171
G01 X-46.84825 Y-44.02633
G01 X-46.70248 Y-43.82572
G01 X-46.66765 Y-43.75739
G01 X-46.58990 Y-43.60476
G01 X-46.51327 Y-43.36890
G01 X-46.47448 Y-43.12397
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-50.44346 Y-39.03426 ( rapid move to begin. )
G01 F100.00000
( Mill infeed pass 1/1 )
G01 Z-0.10000
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F600.00000
G01 X-50.44346 Y-39.03426
G01 X-50.44699 Y-39.13624
G01 X-50.46043 Y-39.23739
G01 X-50.48360 Y-39.33673
G01 X-50.51634 Y-39.43337
G01 X-50.55830 Y-39.52636
G01 X-50.60907 Y-39.61486
G01 X-50.66823 Y-39.69799
G01 X-50.73518 Y-39.77498
G01 X-50.80927 Y-39.84511
G01 X-50.88984 Y-39.90769
G01 X-50.97613 Y-39.96215
G01 X-51.08519 Y-40.06919
G01 X-51.13932 Y-40.15588
G01 X-51.20165 Y-40.23690
G01 X-51.27155 Y-40.31150
G01 X-51.34841 Y-40.37891
G01 X-51.43145 Y-40.43853
G01 X-51.51989 Y-40.48978
G01 X-51.61290 Y-40.53218
G01 X-51.70960 Y-40.56532
G01 X-51.80907 Y-40.58890
G01 X-51.91036 Y-40.60269
G01 X-52.01252 Y-40.60655
G01 X-52.11455 Y-40.60045
G01 X-52.21552 Y-40.58442
G01 X-52.31445 Y-40.55867
G01 X-52.41039 Y-40.52341
G01 X-52.50246 Y-40.47899
G01 X-52.58976 Y-40.42580
G01 X-52.67148 Y-40.36436
G01 X-52.74681 Y-40.29527
G01 X-52.81506 Y-40.21917
G01 X-52.87559 Y-40.13680
G01 X-52.92781 Y-40.04892
G01 X-52.97125 Y-39.95638
G01 X-53.00543 Y-39.86004
G01 X-53.03010 Y-39.76086
G01 X-53.04501 Y-39.65971
G01 X-53.04999 Y-39.55760
G01 X-53.04999 Y-39.04899
G01 X-53.04493 Y-38.94618
G01 X-53.02982 Y-38.84435
G01 X-53.00482 Y-38.74447
G01 X-52.97013 Y-38.64755
G01 X-52.92611 Y-38.55448
G01 X-52.87320 Y-38.46619
G01 X-52.81189 Y-38.38351
G01 X-52.74275 Y-38.30724
G01 X-52.66647 Y-38.23810
G01 X-52.58377 Y-38.17678
G01 X-52.49548 Y-38.12385
G01 X-52.40241 Y-38.07983
G01 X-52.30549 Y-38.04516
G01 X-52.20564 Y-38.02014
G01 X-52.10381 Y-38.00503
G01 X-52.00097 Y-37.99997
G01 X-51.49238 Y-37.99997
G01 X-51.39045 Y-38.00495
G01 X-51.28951 Y-38.01979
G01 X-51.19050 Y-38.04435
G01 X-51.09434 Y-38.07844
G01 X-51.00193 Y-38.12169
G01 X-50.91418 Y-38.17371
G01 X-50.83188 Y-38.23404
G01 X-50.75583 Y-38.30206
G01 X-50.68674 Y-38.37714
G01 X-50.62530 Y-38.45857
G01 X-50.57204 Y-38.54559
G01 X-50.52749 Y-38.63739
G01 X-50.49208 Y-38.73307
G01 X-50.46612 Y-38.83172
G01 X-50.44986 Y-38.93246
G01 X-50.44346 Y-39.03426

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z35.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )