( pcb2gcode 2.5.0 )
( Software-independent Gcode )

G94 ( Millimeters per minute feed rate. )
G21 ( Units == Millimeters. )

G90 ( Absolute coordinates. )
G00 S24000 ( RPM spindle speed. )
G01 F400.00000 ( Feedrate. )


G00 Z35.00000 (Retract to tool change height)
T1
M5      (Spindle stop.)
G04 P1.00000 (Wait for spindle to stop)
(MSG, Change tool bit to cutter diameter 2.10000mm)
M0      (Temporary machine stop.)
M3 ( Spindle on clockwise. )
G04 P1.00000 (Wait for spindle to get up to speed)
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z2.00000 ( retract )

G00 X-52.36997 Y-69.99999 ( rapid move to begin. )
G01 Z-4.00000 F50.00000 ( plunge. )
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G01 F400.00000
G01 X-52.36999 Y-46.29489
G00 Z0.00000
G01 X-52.37000 Y-43.69489
G01 Z-4.00000 F50.00000
G01 F400.00000
G01 X-52.37002 Y-19.98980
G01 X-52.38104 Y-19.84779
G01 X-52.41119 Y-19.70860
G01 X-52.43329 Y-19.64085
G01 X-52.46408 Y-19.56547
G01 X-52.53169 Y-19.44012
G01 X-52.61561 Y-19.32506
G01 X-52.71437 Y-19.22239
G01 X-52.77673 Y-19.17007
G01 X-52.83451 Y-19.12833
G01 X-52.95785 Y-19.05714
G01 X-53.06085 Y-19.01330
G01 X-53.17782 Y-18.97827
G01 X-53.29806 Y-18.95706
G01 X-53.41998 Y-18.94997
G01 X-102.11998 Y-18.94997
G00 Z0.00000
G01 X-104.71998 Y-18.94997
G01 Z-4.00000 F50.00000
G01 F400.00000
G01 X-153.41998 Y-18.94997
G01 X-153.50134 Y-18.95312
G01 X-153.57216 Y-18.96105
G01 X-153.71135 Y-18.99120
G01 X-153.77909 Y-19.01330
G01 X-153.85448 Y-19.04408
G01 X-153.97983 Y-19.11170
G01 X-154.09489 Y-19.19562
G01 X-154.19755 Y-19.29437
G01 X-154.24988 Y-19.35673
G01 X-154.29161 Y-19.41452
G01 X-154.36281 Y-19.53786
G01 X-154.40665 Y-19.64085
G01 X-154.44167 Y-19.75782
G01 X-154.46288 Y-19.87807
G01 X-154.46997 Y-19.99999
G01 X-154.46995 Y-43.70507
G00 Z0.00000
G01 X-154.46994 Y-46.30507
G01 Z-4.00000 F50.00000
G01 F400.00000
G01 X-154.46992 Y-70.01015
G01 X-154.45889 Y-70.15216
G01 X-154.42874 Y-70.29135
G01 X-154.40665 Y-70.35909
G01 X-154.37586 Y-70.43448
G01 X-154.30825 Y-70.55983
G01 X-154.22433 Y-70.67489
G01 X-154.12557 Y-70.77756
G01 X-154.06321 Y-70.82988
G01 X-154.00543 Y-70.87161
G01 X-153.88209 Y-70.94281
G01 X-153.77909 Y-70.98665
G01 X-153.66212 Y-71.02168
G01 X-153.54188 Y-71.04289
G01 X-153.41998 Y-71.04997
G01 X-104.71489 Y-71.04995
G00 Z0.00000
G01 X-102.11489 Y-71.04995
G01 Z-4.00000 F50.00000
G01 F400.00000
G01 X-53.40980 Y-71.04992
G01 X-53.30820 Y-71.04400
G01 X-53.20764 Y-71.02828
G01 X-53.10908 Y-71.00291
G01 X-53.01345 Y-70.96808
G01 X-52.92163 Y-70.92419
G01 X-52.83451 Y-70.87161
G01 X-52.75288 Y-70.81083
G01 X-52.67751 Y-70.74243
G01 X-52.60911 Y-70.66707
G01 X-52.54833 Y-70.58543
G01 X-52.49575 Y-70.49831
G01 X-52.44795 Y-70.39709
G01 X-52.41409 Y-70.30113
G01 X-52.38966 Y-70.20232
G01 X-52.37490 Y-70.10164
G01 X-52.36997 Y-69.99999

G04 P0 ( dwell for no time -- G64 should not smooth over this point )
G00 Z35.000000 ( retract )

M5 ( Spindle off. )
G04 P1.000000
M9 ( Coolant off. )
M2 ( Program end. )