144 lines
4.4 KiB
Markdown
144 lines
4.4 KiB
Markdown
# KiCad → Stencil G-code pipeline
|
||
|
||
Automates the conversion of a KiCad v9 `F.Paste` and `B.Paste` Gerber to G-code for CNC milling a solder paste stencil, using FlatCAM beta 8.995 headless. Tested on Ubuntu 24.04 with Python 3.12 and a Frezu 3040 / FluidNC controller.
|
||
|
||
---
|
||
|
||
## Prerequisites
|
||
|
||
- Ubuntu 24.04
|
||
- Python 3.10–3.12
|
||
- KiCad v9
|
||
- A flat end mill (corn bit), 0.5 mm recommended
|
||
|
||
---
|
||
|
||
## Installation
|
||
|
||
### 1. System dependencies
|
||
|
||
```bash
|
||
sudo apt install python3-venv python3-pip libgeos-dev libspatialindex-dev libxcb-cursor0
|
||
```
|
||
|
||
### 2. Clone FlatCAM beta 8.995
|
||
|
||
```bash
|
||
git clone --branch mstanciu_Beta_8.995 --depth 1 https://github.com/dwrobel/flatcam.git flatcam-beta
|
||
```
|
||
|
||
### 3. Create a Python venv and install dependencies
|
||
|
||
```bash
|
||
cd flatcam-beta
|
||
|
||
python3 -m venv .flatcam-env
|
||
source .flatcam-env/bin/activate
|
||
|
||
pip install PyQt6 PyQt6-Qt6 PyQt6-sip
|
||
|
||
# Skip ortools (path optimizer), rasterio, and gdal (image import) — not needed for stencils
|
||
grep -vE "ortools|rasterio|gdal" requirements.txt | pip install -r /dev/stdin
|
||
```
|
||
|
||
### 4. Verify
|
||
|
||
```bash
|
||
python flatcam.py --version
|
||
```
|
||
|
||
You should see the FlatCAM version string printed without errors.
|
||
|
||
Go back to the project directory:
|
||
```bash
|
||
cd ..
|
||
```
|
||
|
||
### 5. Export the stencil gerbers
|
||
|
||
Export the gerber layers `F.Paste` and `B.Paste`
|
||
```bash
|
||
kicad-cli pcb export gerbers -o gerbers -l F.Paste,B.Paste ../kicad2panel/panel/Flow_Controller_Panel.kicad_pcb
|
||
```
|
||
|
||
---
|
||
|
||
## Usage
|
||
|
||
Generate the stencil G-code for both layers:
|
||
```bash
|
||
./run_stencil.sh gerbers/Flow_Controller_Panel-F_Paste.gtp \
|
||
gcode/Flow_Controller_Panel-F_Paste-stencil.nc
|
||
|
||
./run_stencil.sh gerbers/Flow_Controller_Panel-B_Paste.gbp \
|
||
gcode/Flow_Controller_Panel-B_Paste-stencil.nc
|
||
```
|
||
|
||
G-code for both layers should be in:
|
||
|
||
```
|
||
gcode/Flow_Controller_Panel-F_Paste-stencil.nc
|
||
gcode/Flow_Controller_Panel-B_Paste-stencil.nc
|
||
```
|
||
|
||
---
|
||
|
||
## Parameters
|
||
|
||
All cutting parameters are at the top of `paste_stencil.tcl`:
|
||
|
||
| Variable | Default | Description |
|
||
|---|---|---|
|
||
| `TOOL_DIA` | `0.5` | End mill diameter in mm |
|
||
| `CUT_Z` | `-0.2` | Cutting depth in mm (negative). Set slightly past material thickness |
|
||
| `TRAVEL_Z` | `2.0` | Safe travel height in mm |
|
||
| `FEEDRATE` | `120` | XY feed rate in mm/min |
|
||
| `SPINDLE` | `24000` | Spindle speed in RPM |
|
||
| `OVERLAP` | `60` | Tool overlap in % — higher = cleaner clearing, more paths |
|
||
| `MARGIN` | `0.0` | Inset from aperture edge in mm. 0 = cut to exact pad size |
|
||
|
||
### Depth by material
|
||
|
||
| Material | Thickness | `CUT_Z` | `SPINDLE` | `FEEDRATE` |
|
||
|---|---|---|---|---|
|
||
| Brass shim (CW614N) | 0.15 mm | -0.18 | 24000 RPM | 120 mm/min |
|
||
| Polyimide (Kapton) | 0.10 mm | -0.13 | 24000 RPM | 300 mm/min |
|
||
| Stainless steel shim | 0.15 mm | -0.18 | 16000 RPM | 60 mm/min |
|
||
|
||
---
|
||
|
||
## Preprocessor
|
||
|
||
The script uses the `GRBL_11` preprocessor (`-pp GRBL_11` in `paste_stencil.tcl`), which produces grbl 1.1 compatible G-code. FluidNC implements the grbl protocol so this works directly with no modifications.
|
||
|
||
Alternative: `GRBL_11_no_M6` suppresses tool change commands — not needed for a single-tool stencil job but harmless either way.
|
||
|
||
---
|
||
|
||
## Workholding notes
|
||
|
||
- Stencil material is thin and will flex — use double-sided tape on a flat spoilboard
|
||
- Zero Z directly on the stencil surface, not the spoilboard
|
||
- For brass shim, clamp the edges with small clips if the tape isn't holding — chatter from an unanchored sheet ruins aperture quality
|
||
|
||
---
|
||
|
||
## Troubleshooting
|
||
|
||
**FlatCAM hangs after writing G-code**
|
||
The `run_stencil.sh` wrapper detects the `TclCommandQuit` log line and kills the process after 3 seconds. This is expected behavior — FlatCAM's Qt GUI cleanup hangs in headless mode.
|
||
|
||
**`ImportError: cannot import name 'Inf' from numpy`**
|
||
You have the old PyPI FlatCAM 8.5 installed. Follow the installation steps above to switch to the beta 8.995 clone.
|
||
|
||
**`ImportError: cannot import name 'cascaded_union' from shapely.ops`**
|
||
Same cause — old FlatCAM 8.5 is incompatible with Shapely 2.0. Switch to beta 8.995.
|
||
|
||
**G-code cuts everything except the pads**
|
||
You used `ncc` (non-copper clear) instead of `paint`. The correct command is `paint` — it pockets the pad polygons. `ncc` clears everything around them, which is the inverse.
|
||
|
||
**`gdal` fails to install**
|
||
Skip it — `gdal` is only needed for the image import plugin. Use:
|
||
```bash
|
||
grep -vE "ortools|rasterio|gdal" requirements.txt | pip install -r /dev/stdin
|
||
``` |