829 lines
21 KiB
Plaintext
829 lines
21 KiB
Plaintext
( pcb2gcode 2.5.0 )
|
|
( Software-independent Gcode )
|
|
|
|
G94 ( Millimeters per minute feed rate. )
|
|
G21 ( Units == Millimeters. )
|
|
|
|
G90 ( Absolute coordinates. )
|
|
G00 S24000 ( RPM spindle speed. )
|
|
G01 F600.00000 ( Feedrate. )
|
|
|
|
|
|
G00 Z35.00000 (Retract to tool change height)
|
|
T1
|
|
M5 (Spindle stop.)
|
|
G04 P1.00000 (Wait for spindle to stop)
|
|
(MSG, Change tool bit to mill diameter 0.05000mm)
|
|
M0 (Temporary machine stop.)
|
|
M3 ( Spindle on clockwise. )
|
|
G04 P1.00000 (Wait for spindle to get up to speed)
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X42.40233 Y-10.68766 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X42.40233 Y-10.68766
|
|
G01 X42.40233 Y-10.16396
|
|
G01 X42.39225 Y-10.06523
|
|
G01 X42.33888 Y-9.90417
|
|
G01 X42.24991 Y-9.75992
|
|
G01 X42.13007 Y-9.64009
|
|
G01 X41.98585 Y-9.55111
|
|
G01 X41.82476 Y-9.49775
|
|
G01 X41.72606 Y-9.48766
|
|
G01 X41.35235 Y-9.48766
|
|
G01 X41.35235 Y-9.93767
|
|
G01 X41.68245 Y-9.93772
|
|
G01 X41.74145 Y-9.94542
|
|
G01 X41.79890 Y-9.96617
|
|
G01 X41.84676 Y-9.99617
|
|
G01 X41.88707 Y-10.03498
|
|
G01 X41.92359 Y-10.09068
|
|
G01 X41.94338 Y-10.14359
|
|
G01 X41.95212 Y-10.20247
|
|
G01 X41.95232 Y-10.68766
|
|
G01 X42.40233 Y-10.68766
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X42.40233 Y-11.76137 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X42.40233 Y-11.76137
|
|
G01 X42.40233 Y-11.23767
|
|
G01 X41.95232 Y-11.23767
|
|
G01 X41.95212 Y-11.72289
|
|
G01 X41.94338 Y-11.78176
|
|
G01 X41.92359 Y-11.83465
|
|
G01 X41.88707 Y-11.89035
|
|
G01 X41.84676 Y-11.92916
|
|
G01 X41.79890 Y-11.95916
|
|
G01 X41.74145 Y-11.97991
|
|
G01 X41.68245 Y-11.98761
|
|
G01 X41.35235 Y-11.98766
|
|
G01 X41.35235 Y-12.43764
|
|
G01 X41.72603 Y-12.43764
|
|
G01 X41.82476 Y-12.42756
|
|
G01 X41.98585 Y-12.37419
|
|
G01 X42.13007 Y-12.28522
|
|
G01 X42.24991 Y-12.16538
|
|
G01 X42.33888 Y-12.02113
|
|
G01 X42.39225 Y-11.86007
|
|
G01 X42.40233 Y-11.76137
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X43.82720 Y-22.31837 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X43.82720 Y-22.31837
|
|
G01 X43.82481 Y-22.22312
|
|
G01 X43.79476 Y-21.99604
|
|
G01 X43.77076 Y-21.89645
|
|
G01 X43.73540 Y-21.77481
|
|
G01 X43.70459 Y-21.69371
|
|
G01 X43.64772 Y-21.56323
|
|
G01 X43.58511 Y-21.44931
|
|
G01 X43.53342 Y-21.36470
|
|
G01 X43.47828 Y-21.28871
|
|
G01 X43.39466 Y-21.18241
|
|
G01 X43.23223 Y-21.02076
|
|
G01 X43.05064 Y-20.88098
|
|
G01 X42.85209 Y-20.76668
|
|
G01 X42.64046 Y-20.67888
|
|
G01 X42.47683 Y-20.63333
|
|
G01 X42.41907 Y-20.61957
|
|
G01 X42.32296 Y-20.60486
|
|
G01 X42.16731 Y-20.58873
|
|
G01 X41.96604 Y-20.58934
|
|
G01 X41.75600 Y-20.60898
|
|
G01 X41.60922 Y-20.61210
|
|
G01 X41.47114 Y-20.51441
|
|
G01 X41.36223 Y-20.42010
|
|
G01 X39.61044 Y-18.66831
|
|
G01 X39.55575 Y-18.60956
|
|
G01 X39.45347 Y-18.47474
|
|
G01 X39.43795 Y-18.37078
|
|
G01 X39.42761 Y-18.22691
|
|
G01 X39.42761 Y-12.47709
|
|
G01 X39.43805 Y-12.32385
|
|
G01 X39.46342 Y-12.17851
|
|
G01 X39.61725 Y-12.00417
|
|
G01 X39.71428 Y-11.90818
|
|
G01 X39.77803 Y-11.60696
|
|
G01 X39.80031 Y-11.47745
|
|
G01 X39.81511 Y-11.35873
|
|
G01 X39.82484 Y-11.22142
|
|
G01 X39.82654 Y-10.75914
|
|
G01 X39.81588 Y-10.57524
|
|
G01 X39.78606 Y-10.35934
|
|
G01 X39.71859 Y-10.03828
|
|
G01 X39.63147 Y-9.95921
|
|
G01 X39.48672 Y-9.81382
|
|
G01 X39.42063 Y-9.75820
|
|
G01 X39.30970 Y-9.67753
|
|
G01 X39.17511 Y-9.60049
|
|
G01 X39.13223 Y-9.58157
|
|
G01 X39.01181 Y-9.53280
|
|
G01 X38.84092 Y-9.48741
|
|
G01 X38.66571 Y-9.46440
|
|
G01 X38.57255 Y-9.46262
|
|
G01 X38.48613 Y-9.46434
|
|
G01 X38.31367 Y-9.48698
|
|
G01 X38.14296 Y-9.53303
|
|
G01 X37.97956 Y-9.60049
|
|
G01 X37.82655 Y-9.68898
|
|
G01 X37.68629 Y-9.79660
|
|
G01 X37.56122 Y-9.92154
|
|
G01 X37.45375 Y-10.06191
|
|
G01 X37.36511 Y-10.21484
|
|
G01 X37.29780 Y-10.37829
|
|
G01 X37.25162 Y-10.54898
|
|
G01 X37.23290 Y-10.68474
|
|
G01 X37.22772 Y-10.76231
|
|
G01 X37.22909 Y-11.20102
|
|
G01 X37.25281 Y-11.37613
|
|
G01 X37.29754 Y-11.54709
|
|
G01 X37.36533 Y-11.71034
|
|
G01 X37.45256 Y-11.86205
|
|
G01 X37.52317 Y-11.95548
|
|
G01 X37.63188 Y-12.08603
|
|
G01 X37.69975 Y-12.17450
|
|
G01 X37.71674 Y-12.28664
|
|
G01 X37.72708 Y-12.43051
|
|
G01 X37.72708 Y-18.83766
|
|
G01 X37.72886 Y-18.90443
|
|
G01 X37.74969 Y-19.03633
|
|
G01 X37.79165 Y-19.16308
|
|
G01 X37.85136 Y-19.28256
|
|
G01 X37.92805 Y-19.38815
|
|
G01 X37.95581 Y-19.41792
|
|
G01 X40.15982 Y-21.62254
|
|
G01 X40.24597 Y-21.71924
|
|
G01 X40.35067 Y-21.86859
|
|
G01 X40.34684 Y-22.02912
|
|
G01 X40.32809 Y-22.26041
|
|
G01 X40.32842 Y-22.42906
|
|
G01 X40.33767 Y-22.53023
|
|
G01 X40.35893 Y-22.67946
|
|
G01 X40.39901 Y-22.83473
|
|
G01 X40.43005 Y-22.93145
|
|
G01 X40.50625 Y-23.11243
|
|
G01 X40.62050 Y-23.31108
|
|
G01 X40.76027 Y-23.49269
|
|
G01 X40.86088 Y-23.59607
|
|
G01 X40.94623 Y-23.67448
|
|
G01 X41.10409 Y-23.79421
|
|
G01 X41.30254 Y-23.90882
|
|
G01 X41.51422 Y-23.99657
|
|
G01 X41.73553 Y-24.05601
|
|
G01 X41.96276 Y-24.08598
|
|
G01 X42.19192 Y-24.08585
|
|
G01 X42.41910 Y-24.05573
|
|
G01 X42.64025 Y-23.99594
|
|
G01 X42.85189 Y-23.90823
|
|
G01 X42.93177 Y-23.86495
|
|
G01 X43.05013 Y-23.79353
|
|
G01 X43.15806 Y-23.71405
|
|
G01 X43.23190 Y-23.65413
|
|
G01 X43.39410 Y-23.49241
|
|
G01 X43.53370 Y-23.31077
|
|
G01 X43.64856 Y-23.11248
|
|
G01 X43.73649 Y-22.90084
|
|
G01 X43.79567 Y-22.67946
|
|
G01 X43.82351 Y-22.47064
|
|
G01 X43.82720 Y-22.31837
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X43.08757 Y-33.18850 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X43.08757 Y-33.18850
|
|
G01 X43.03776 Y-33.15030
|
|
G01 X42.84193 Y-33.03722
|
|
G01 X42.63301 Y-32.95071
|
|
G01 X42.41460 Y-32.89216
|
|
G01 X42.19042 Y-32.86267
|
|
G01 X41.96428 Y-32.86267
|
|
G01 X41.74010 Y-32.89216
|
|
G01 X41.52169 Y-32.95071
|
|
G01 X41.31277 Y-33.03722
|
|
G01 X41.11691 Y-33.15030
|
|
G01 X41.06710 Y-33.18850
|
|
G01 X41.39187 Y-33.51327
|
|
G01 X41.45113 Y-33.47705
|
|
G01 X41.53398 Y-33.43425
|
|
G01 X41.61973 Y-33.39762
|
|
G01 X41.70795 Y-33.36737
|
|
G01 X41.79814 Y-33.34362
|
|
G01 X41.88981 Y-33.32655
|
|
G01 X41.98247 Y-33.31621
|
|
G01 X42.07566 Y-33.31268
|
|
G01 X42.16886 Y-33.31596
|
|
G01 X42.25974 Y-33.32579
|
|
G01 X42.35148 Y-33.34250
|
|
G01 X42.44175 Y-33.36587
|
|
G01 X42.53009 Y-33.39577
|
|
G01 X42.61600 Y-33.43206
|
|
G01 X42.69900 Y-33.47451
|
|
G01 X42.76278 Y-33.51329
|
|
G01 X43.08757 Y-33.18850
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X43.80233 Y-34.70072 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X43.80233 Y-34.70072
|
|
G01 X43.80233 Y-34.47461
|
|
G01 X43.77284 Y-34.25040
|
|
G01 X43.71429 Y-34.03199
|
|
G01 X43.62778 Y-33.82307
|
|
G01 X43.51470 Y-33.62724
|
|
G01 X43.47650 Y-33.57743
|
|
G01 X43.15176 Y-33.90217
|
|
G01 X43.18666 Y-33.95922
|
|
G01 X43.22964 Y-34.04197
|
|
G01 X43.26644 Y-34.12767
|
|
G01 X43.29687 Y-34.21581
|
|
G01 X43.32080 Y-34.30593
|
|
G01 X43.33807 Y-34.39757
|
|
G01 X43.34846 Y-34.48840
|
|
G01 X43.35232 Y-34.58340
|
|
G01 X43.34935 Y-34.67478
|
|
G01 X43.33931 Y-34.76932
|
|
G01 X43.32306 Y-34.85929
|
|
G01 X43.29987 Y-34.94961
|
|
G01 X43.27015 Y-35.03800
|
|
G01 X43.23403 Y-35.12398
|
|
G01 X43.19174 Y-35.20709
|
|
G01 X43.15171 Y-35.27311
|
|
G01 X43.47650 Y-35.59790
|
|
G01 X43.51470 Y-35.54806
|
|
G01 X43.62778 Y-35.35223
|
|
G01 X43.71429 Y-35.14331
|
|
G01 X43.77284 Y-34.92490
|
|
G01 X43.80233 Y-34.70072
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X43.08757 Y-35.98680 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X43.08757 Y-35.98680
|
|
G01 X43.03776 Y-36.02500
|
|
G01 X42.84193 Y-36.13808
|
|
G01 X42.63301 Y-36.22459
|
|
G01 X42.41460 Y-36.28314
|
|
G01 X42.19042 Y-36.31265
|
|
G01 X41.96428 Y-36.31265
|
|
G01 X41.74010 Y-36.28314
|
|
G01 X41.52169 Y-36.22459
|
|
G01 X41.31277 Y-36.13808
|
|
G01 X41.11691 Y-36.02502
|
|
G01 X41.06710 Y-35.98680
|
|
G01 X41.39184 Y-35.66206
|
|
G01 X41.45113 Y-35.69828
|
|
G01 X41.53398 Y-35.74108
|
|
G01 X41.61973 Y-35.77770
|
|
G01 X41.70795 Y-35.80798
|
|
G01 X41.79814 Y-35.83170
|
|
G01 X41.88798 Y-35.84852
|
|
G01 X41.98064 Y-35.85898
|
|
G01 X42.07566 Y-35.86264
|
|
G01 X42.16886 Y-35.85936
|
|
G01 X42.26154 Y-35.84928
|
|
G01 X42.35326 Y-35.83244
|
|
G01 X42.44351 Y-35.80895
|
|
G01 X42.53009 Y-35.77956
|
|
G01 X42.61600 Y-35.74329
|
|
G01 X42.69900 Y-35.70082
|
|
G01 X42.76281 Y-35.66203
|
|
G01 X43.08757 Y-35.98680
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X45.08000 Y-45.14266 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X45.08000 Y-45.14266
|
|
G01 X-0.00266 Y-45.14266
|
|
G01 X-0.00266 Y0.00000
|
|
G01 X45.08000 Y0.00000
|
|
G01 X45.08000 Y-45.14266
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X41.00294 Y-35.27316 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X41.00294 Y-35.27316
|
|
G01 X40.67821 Y-35.59790
|
|
G01 X40.64000 Y-35.54809
|
|
G01 X40.52692 Y-35.35223
|
|
G01 X40.44041 Y-35.14331
|
|
G01 X40.38186 Y-34.92490
|
|
G01 X40.35235 Y-34.70072
|
|
G01 X40.35235 Y-34.47458
|
|
G01 X40.38186 Y-34.25040
|
|
G01 X40.44041 Y-34.03199
|
|
G01 X40.52692 Y-33.82307
|
|
G01 X40.63998 Y-33.62726
|
|
G01 X40.67821 Y-33.57743
|
|
G01 X41.00294 Y-33.90217
|
|
G01 X40.96545 Y-33.96374
|
|
G01 X40.92281 Y-34.04667
|
|
G01 X40.88636 Y-34.13249
|
|
G01 X40.85628 Y-34.22076
|
|
G01 X40.83312 Y-34.30920
|
|
G01 X40.81610 Y-34.40090
|
|
G01 X40.80581 Y-34.49358
|
|
G01 X40.80236 Y-34.58675
|
|
G01 X40.80581 Y-34.68177
|
|
G01 X40.81610 Y-34.77445
|
|
G01 X40.83312 Y-34.86612
|
|
G01 X40.85628 Y-34.95457
|
|
G01 X40.88636 Y-35.04283
|
|
G01 X40.92281 Y-35.12868
|
|
G01 X40.96545 Y-35.21161
|
|
G01 X41.00294 Y-35.27316
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X17.90233 Y-11.76137 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X17.90233 Y-11.76137
|
|
G01 X17.90233 Y-11.23767
|
|
G01 X17.45232 Y-11.23767
|
|
G01 X17.45212 Y-11.72289
|
|
G01 X17.44338 Y-11.78176
|
|
G01 X17.42362 Y-11.83465
|
|
G01 X17.38707 Y-11.89035
|
|
G01 X17.34673 Y-11.92916
|
|
G01 X17.29888 Y-11.95916
|
|
G01 X17.24145 Y-11.97991
|
|
G01 X17.18244 Y-11.98761
|
|
G01 X16.85234 Y-11.98766
|
|
G01 X16.85234 Y-12.43764
|
|
G01 X17.22606 Y-12.43764
|
|
G01 X17.32476 Y-12.42756
|
|
G01 X17.48585 Y-12.37419
|
|
G01 X17.63009 Y-12.28522
|
|
G01 X17.74990 Y-12.16538
|
|
G01 X17.83888 Y-12.02113
|
|
G01 X17.89225 Y-11.86007
|
|
G01 X17.90233 Y-11.76137
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X17.90233 Y-10.68766 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X17.90233 Y-10.68766
|
|
G01 X17.90233 Y-10.16396
|
|
G01 X17.89225 Y-10.06523
|
|
G01 X17.83888 Y-9.90417
|
|
G01 X17.74990 Y-9.75992
|
|
G01 X17.63009 Y-9.64009
|
|
G01 X17.48585 Y-9.55111
|
|
G01 X17.32476 Y-9.49775
|
|
G01 X17.22606 Y-9.48766
|
|
G01 X16.85234 Y-9.48766
|
|
G01 X16.85234 Y-9.93767
|
|
G01 X17.18244 Y-9.93772
|
|
G01 X17.24145 Y-9.94542
|
|
G01 X17.29888 Y-9.96617
|
|
G01 X17.34673 Y-9.99617
|
|
G01 X17.38707 Y-10.03498
|
|
G01 X17.42362 Y-10.09068
|
|
G01 X17.44338 Y-10.14359
|
|
G01 X17.45212 Y-10.20247
|
|
G01 X17.45232 Y-10.68766
|
|
G01 X17.90233 Y-10.68766
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X15.32725 Y-10.79597 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X15.32725 Y-10.79597
|
|
G01 X15.32624 Y-11.18179
|
|
G01 X15.31349 Y-11.37448
|
|
G01 X15.28654 Y-11.56277
|
|
G01 X15.21854 Y-11.88377
|
|
G01 X15.14285 Y-11.95428
|
|
G01 X14.97048 Y-12.12687
|
|
G01 X14.84303 Y-12.22558
|
|
G01 X14.75497 Y-12.28024
|
|
G01 X14.67485 Y-12.32426
|
|
G01 X14.51295 Y-12.39147
|
|
G01 X14.37805 Y-12.42860
|
|
G01 X14.16772 Y-12.47872
|
|
G01 X14.02472 Y-12.59329
|
|
G01 X4.99489 Y-21.62254
|
|
G01 X4.90048 Y-21.73158
|
|
G01 X4.80355 Y-21.86846
|
|
G01 X4.80528 Y-21.99691
|
|
G01 X4.82522 Y-22.22307
|
|
G01 X4.82555 Y-22.45223
|
|
G01 X4.79568 Y-22.67946
|
|
G01 X4.73601 Y-22.90069
|
|
G01 X4.64874 Y-23.11255
|
|
G01 X4.53395 Y-23.31095
|
|
G01 X4.39428 Y-23.49259
|
|
G01 X4.23246 Y-23.65479
|
|
G01 X4.05715 Y-23.78967
|
|
G01 X3.95293 Y-23.85291
|
|
G01 X3.85196 Y-23.90841
|
|
G01 X3.64041 Y-23.99640
|
|
G01 X3.41912 Y-24.05593
|
|
G01 X3.29675 Y-24.07389
|
|
G01 X3.19189 Y-24.08530
|
|
G01 X2.96279 Y-24.08570
|
|
G01 X2.73823 Y-24.05634
|
|
G01 X2.61994 Y-24.02688
|
|
G01 X2.51438 Y-23.99609
|
|
G01 X2.30251 Y-23.90884
|
|
G01 X2.11011 Y-23.79807
|
|
G01 X2.01184 Y-23.72594
|
|
G01 X1.92258 Y-23.65441
|
|
G01 X1.76005 Y-23.49289
|
|
G01 X1.64542 Y-23.34509
|
|
G01 X1.58446 Y-23.25146
|
|
G01 X1.50622 Y-23.11245
|
|
G01 X1.44046 Y-22.95799
|
|
G01 X1.41862 Y-22.90072
|
|
G01 X1.35959 Y-22.67933
|
|
G01 X1.32896 Y-22.45225
|
|
G01 X1.32952 Y-22.22309
|
|
G01 X1.35911 Y-21.99587
|
|
G01 X1.41870 Y-21.77463
|
|
G01 X1.50638 Y-21.56295
|
|
G01 X1.54168 Y-21.49785
|
|
G01 X1.62063 Y-21.36432
|
|
G01 X1.71552 Y-21.23806
|
|
G01 X1.78806 Y-21.15307
|
|
G01 X1.89891 Y-21.04250
|
|
G01 X2.01986 Y-20.94319
|
|
G01 X2.10419 Y-20.88121
|
|
G01 X2.30251 Y-20.76643
|
|
G01 X2.51432 Y-20.67903
|
|
G01 X2.73553 Y-20.61929
|
|
G01 X2.96279 Y-20.58987
|
|
G01 X3.16533 Y-20.58675
|
|
G01 X3.35826 Y-20.57184
|
|
G01 X3.52847 Y-20.54596
|
|
G01 X3.63111 Y-20.44570
|
|
G01 X3.65110 Y-20.39211
|
|
G01 X3.71564 Y-20.12340
|
|
G01 X3.72710 Y-19.96318
|
|
G01 X3.72710 Y-12.43051
|
|
G01 X3.71676 Y-12.28664
|
|
G01 X3.69969 Y-12.17422
|
|
G01 X3.45255 Y-11.86205
|
|
G01 X3.36528 Y-11.71037
|
|
G01 X3.29791 Y-11.54697
|
|
G01 X3.24826 Y-11.35291
|
|
G01 X3.22931 Y-11.20099
|
|
G01 X3.22718 Y-11.12868
|
|
G01 X3.22865 Y-10.72426
|
|
G01 X3.25214 Y-10.54908
|
|
G01 X3.29809 Y-10.37839
|
|
G01 X3.36578 Y-10.21519
|
|
G01 X3.45400 Y-10.06206
|
|
G01 X3.56167 Y-9.92190
|
|
G01 X3.68676 Y-9.79711
|
|
G01 X3.82697 Y-9.68964
|
|
G01 X3.93345 Y-9.62599
|
|
G01 X4.04224 Y-9.57331
|
|
G01 X4.14315 Y-9.53364
|
|
G01 X4.29243 Y-9.49239
|
|
G01 X4.41176 Y-9.47298
|
|
G01 X4.48900 Y-9.46440
|
|
G01 X4.66573 Y-9.46407
|
|
G01 X4.84102 Y-9.48698
|
|
G01 X4.98160 Y-9.52414
|
|
G01 X5.01186 Y-9.53270
|
|
G01 X5.17515 Y-9.60046
|
|
G01 X5.32809 Y-9.68908
|
|
G01 X5.46812 Y-9.79691
|
|
G01 X5.61485 Y-9.94319
|
|
G01 X5.71752 Y-10.03874
|
|
G01 X5.78513 Y-10.35533
|
|
G01 X5.81165 Y-10.53577
|
|
G01 X5.82212 Y-10.65665
|
|
G01 X5.82732 Y-10.81270
|
|
G01 X5.82707 Y-11.14176
|
|
G01 X5.82273 Y-11.25784
|
|
G01 X5.80629 Y-11.43620
|
|
G01 X5.77779 Y-11.60978
|
|
G01 X5.71409 Y-11.90810
|
|
G01 X5.62679 Y-11.99401
|
|
G01 X5.46349 Y-12.17831
|
|
G01 X5.43807 Y-12.32385
|
|
G01 X5.42760 Y-12.47709
|
|
G01 X5.42760 Y-17.27792
|
|
G01 X5.43794 Y-17.42178
|
|
G01 X5.44800 Y-17.49163
|
|
G01 X5.48343 Y-17.65127
|
|
G01 X5.54386 Y-17.81091
|
|
G01 X5.57579 Y-17.88076
|
|
G01 X5.70634 Y-18.11205
|
|
G01 X5.90401 Y-18.05988
|
|
G01 X5.97815 Y-18.03522
|
|
G01 X6.15196 Y-17.96354
|
|
G01 X6.30497 Y-17.87108
|
|
G01 X6.36933 Y-17.82468
|
|
G01 X6.49326 Y-17.71932
|
|
G01 X12.54425 Y-11.66830
|
|
G01 X12.62751 Y-11.57389
|
|
G01 X12.72957 Y-11.43279
|
|
G01 X12.72881 Y-10.72426
|
|
G01 X12.75172 Y-10.54900
|
|
G01 X12.79772 Y-10.37826
|
|
G01 X12.86526 Y-10.21489
|
|
G01 X12.95672 Y-10.05743
|
|
G01 X13.06122 Y-9.92154
|
|
G01 X13.18639 Y-9.79673
|
|
G01 X13.24168 Y-9.75225
|
|
G01 X13.32639 Y-9.68875
|
|
G01 X13.42789 Y-9.62889
|
|
G01 X13.47963 Y-9.60064
|
|
G01 X13.59866 Y-9.54999
|
|
G01 X13.68032 Y-9.52185
|
|
G01 X13.81369 Y-9.48713
|
|
G01 X13.98895 Y-9.46391
|
|
G01 X14.16571 Y-9.46440
|
|
G01 X14.34097 Y-9.48720
|
|
G01 X14.51184 Y-9.53272
|
|
G01 X14.67496 Y-9.60077
|
|
G01 X14.82804 Y-9.68916
|
|
G01 X14.96858 Y-9.79642
|
|
G01 X15.13406 Y-9.96160
|
|
G01 X15.21829 Y-10.03838
|
|
G01 X15.27526 Y-10.30318
|
|
G01 X15.30244 Y-10.46086
|
|
G01 X15.32217 Y-10.65426
|
|
G01 X15.32725 Y-10.79597
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X8.40235 Y-10.68766 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X8.40235 Y-10.68766
|
|
G01 X7.95231 Y-10.68766
|
|
G01 X7.95213 Y-10.20247
|
|
G01 X7.94340 Y-10.14359
|
|
G01 X7.92386 Y-10.09112
|
|
G01 X7.89379 Y-10.04331
|
|
G01 X7.84629 Y-9.99592
|
|
G01 X7.79427 Y-9.96396
|
|
G01 X7.74098 Y-9.94527
|
|
G01 X7.68244 Y-9.93772
|
|
G01 X7.35234 Y-9.93767
|
|
G01 X7.35234 Y-9.48766
|
|
G01 X7.72605 Y-9.48766
|
|
G01 X7.82478 Y-9.49775
|
|
G01 X7.98584 Y-9.55111
|
|
G01 X8.13009 Y-9.64009
|
|
G01 X8.24992 Y-9.75992
|
|
G01 X8.33887 Y-9.90417
|
|
G01 X8.39224 Y-10.06523
|
|
G01 X8.40235 Y-10.16396
|
|
G01 X8.40235 Y-10.68766
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X8.40235 Y-11.76137 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X8.40235 Y-11.76137
|
|
G01 X8.39224 Y-11.86007
|
|
G01 X8.33887 Y-12.02113
|
|
G01 X8.24992 Y-12.16538
|
|
G01 X8.13009 Y-12.28522
|
|
G01 X7.98584 Y-12.37419
|
|
G01 X7.82478 Y-12.42756
|
|
G01 X7.72605 Y-12.43764
|
|
G01 X7.35236 Y-12.43764
|
|
G01 X7.35234 Y-11.98766
|
|
G01 X7.68244 Y-11.98761
|
|
G01 X7.74147 Y-11.97991
|
|
G01 X7.80390 Y-11.95669
|
|
G01 X7.85071 Y-11.92599
|
|
G01 X7.89059 Y-11.88601
|
|
G01 X7.92361 Y-11.83465
|
|
G01 X7.94340 Y-11.78176
|
|
G01 X7.95213 Y-11.72289
|
|
G01 X7.95231 Y-11.23767
|
|
G01 X8.40235 Y-11.23767
|
|
G01 X8.40235 Y-11.76137
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X4.08757 Y-33.18850 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X4.08757 Y-33.18850
|
|
G01 X4.03777 Y-33.15030
|
|
G01 X3.84193 Y-33.03722
|
|
G01 X3.63302 Y-32.95071
|
|
G01 X3.41460 Y-32.89216
|
|
G01 X3.19042 Y-32.86267
|
|
G01 X2.96429 Y-32.86267
|
|
G01 X2.74010 Y-32.89216
|
|
G01 X2.52169 Y-32.95071
|
|
G01 X2.31278 Y-33.03722
|
|
G01 X2.11692 Y-33.15030
|
|
G01 X2.06711 Y-33.18850
|
|
G01 X2.39185 Y-33.51327
|
|
G01 X2.45113 Y-33.47705
|
|
G01 X2.53398 Y-33.43425
|
|
G01 X2.61973 Y-33.39762
|
|
G01 X2.70795 Y-33.36737
|
|
G01 X2.79812 Y-33.34362
|
|
G01 X2.88979 Y-33.32655
|
|
G01 X2.98247 Y-33.31621
|
|
G01 X3.07566 Y-33.31268
|
|
G01 X3.16886 Y-33.31596
|
|
G01 X3.25974 Y-33.32579
|
|
G01 X3.35148 Y-33.34250
|
|
G01 X3.44175 Y-33.36587
|
|
G01 X3.53007 Y-33.39577
|
|
G01 X3.61600 Y-33.43206
|
|
G01 X3.69901 Y-33.47451
|
|
G01 X3.76279 Y-33.51329
|
|
G01 X4.08757 Y-33.18850
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X4.80233 Y-34.70072 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X4.80233 Y-34.70072
|
|
G01 X4.80233 Y-34.47461
|
|
G01 X4.77282 Y-34.25040
|
|
G01 X4.71429 Y-34.03199
|
|
G01 X4.62778 Y-33.82307
|
|
G01 X4.51470 Y-33.62724
|
|
G01 X4.47650 Y-33.57743
|
|
G01 X4.15176 Y-33.90217
|
|
G01 X4.18666 Y-33.95922
|
|
G01 X4.22964 Y-34.04197
|
|
G01 X4.26644 Y-34.12767
|
|
G01 X4.29687 Y-34.21581
|
|
G01 X4.32080 Y-34.30593
|
|
G01 X4.33807 Y-34.39757
|
|
G01 X4.34859 Y-34.49023
|
|
G01 X4.35232 Y-34.58340
|
|
G01 X4.34935 Y-34.67478
|
|
G01 X4.33931 Y-34.76932
|
|
G01 X4.32306 Y-34.85929
|
|
G01 X4.29987 Y-34.94961
|
|
G01 X4.27015 Y-35.03800
|
|
G01 X4.23403 Y-35.12398
|
|
G01 X4.19174 Y-35.20709
|
|
G01 X4.15168 Y-35.27311
|
|
G01 X4.47647 Y-35.59790
|
|
G01 X4.51470 Y-35.54806
|
|
G01 X4.62778 Y-35.35223
|
|
G01 X4.71429 Y-35.14331
|
|
G01 X4.77282 Y-34.92490
|
|
G01 X4.80233 Y-34.70072
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X4.08757 Y-35.98680 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X4.08757 Y-35.98680
|
|
G01 X4.03777 Y-36.02500
|
|
G01 X3.84193 Y-36.13808
|
|
G01 X3.63302 Y-36.22459
|
|
G01 X3.41460 Y-36.28314
|
|
G01 X3.19042 Y-36.31265
|
|
G01 X2.96429 Y-36.31265
|
|
G01 X2.74010 Y-36.28314
|
|
G01 X2.52169 Y-36.22459
|
|
G01 X2.31278 Y-36.13808
|
|
G01 X2.11692 Y-36.02502
|
|
G01 X2.06711 Y-35.98680
|
|
G01 X2.39185 Y-35.66206
|
|
G01 X2.45113 Y-35.69828
|
|
G01 X2.53398 Y-35.74108
|
|
G01 X2.61973 Y-35.77770
|
|
G01 X2.70795 Y-35.80798
|
|
G01 X2.79812 Y-35.83170
|
|
G01 X2.88798 Y-35.84852
|
|
G01 X2.98064 Y-35.85898
|
|
G01 X3.07566 Y-35.86264
|
|
G01 X3.16886 Y-35.85936
|
|
G01 X3.26154 Y-35.84928
|
|
G01 X3.35326 Y-35.83244
|
|
G01 X3.44351 Y-35.80895
|
|
G01 X3.53007 Y-35.77956
|
|
G01 X3.61600 Y-35.74329
|
|
G01 X3.69901 Y-35.70082
|
|
G01 X3.76281 Y-35.66203
|
|
G01 X4.08757 Y-35.98680
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z2.00000 ( retract )
|
|
|
|
G00 X2.00295 Y-35.27316 ( rapid move to begin. )
|
|
G01 F100.00000
|
|
( Mill infeed pass 1/1 )
|
|
G01 Z-0.10000
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G01 F600.00000
|
|
G01 X2.00295 Y-35.27316
|
|
G01 X1.96546 Y-35.21161
|
|
G01 X1.92281 Y-35.12868
|
|
G01 X1.88636 Y-35.04283
|
|
G01 X1.85629 Y-34.95457
|
|
G01 X1.83312 Y-34.86612
|
|
G01 X1.81610 Y-34.77445
|
|
G01 X1.80582 Y-34.68177
|
|
G01 X1.80234 Y-34.58858
|
|
G01 X1.80582 Y-34.49358
|
|
G01 X1.81610 Y-34.40090
|
|
G01 X1.83312 Y-34.30920
|
|
G01 X1.85629 Y-34.22076
|
|
G01 X1.88636 Y-34.13249
|
|
G01 X1.92281 Y-34.04667
|
|
G01 X1.96546 Y-33.96374
|
|
G01 X2.00295 Y-33.90217
|
|
G01 X1.67821 Y-33.57743
|
|
G01 X1.63998 Y-33.62726
|
|
G01 X1.52692 Y-33.82307
|
|
G01 X1.44039 Y-34.03199
|
|
G01 X1.38187 Y-34.25040
|
|
G01 X1.35235 Y-34.47458
|
|
G01 X1.35235 Y-34.70072
|
|
G01 X1.38187 Y-34.92490
|
|
G01 X1.44039 Y-35.14331
|
|
G01 X1.52692 Y-35.35223
|
|
G01 X1.64001 Y-35.54809
|
|
G01 X1.67821 Y-35.59790
|
|
G01 X2.00295 Y-35.27316
|
|
|
|
G04 P0 ( dwell for no time -- G64 should not smooth over this point )
|
|
G00 Z35.000000 ( retract )
|
|
|
|
M5 ( Spindle off. )
|
|
G04 P1.000000
|
|
M9 ( Coolant off. )
|
|
M2 ( Program end. )
|
|
|