modified kikit script

Flow_Controller.kicad_prl

@@ -20,7 +20,7 @@
       "footprints": true,
       "graphics": true,
       "keepouts": true,
-      "lockedItems": false,
+      "lockedItems": true,
       "otherItems": true,
       "pads": true,
       "text": true,
@@ -40,6 +40,7 @@
       "footprint_references",
       "tracks",
       "drc_errors",
+      "drawing_sheet",
       "bitmaps",
       "pads",
       "zones",

scripts/Readme.md

@@ -1,24 +1,306 @@
-## Panelize the board
+# Install kikit
 
 Install `kikit`:
 ```bash
 pipx install --system-site-packages kikit
 ```
 
-Panelize a finished PCB: 
+![Panel](../images/Flow_Controller_panel.png)
-```bash
-mkdir -p panel
 
+
+# KiKit Fixture Post-Processor
+
+Post-processing script for KiKit panelized PCBs that places any generated panel
+inside a fixed CNC fixture coordinate system.
+
+The script:
+
+- Centres the finished panel inside a predefined fixture opening
+- Adds mechanical alignment pin holes
+- Draws fixture reference geometry
+- Moves the complete design so the fixture origin is always at `(0, 0)`
+
+The resulting output is intended for repeatable CNC manufacturing workflows
+where drilling, routing, and UV exposure all share the same physical fixture
+and machine datum.
+
+---
+
+# Fixture Geometry
+
+## Outer Fixture Frame
+
+| Parameter | Value |
+|---|---|
+| Width | 200.0 mm |
+| Height | 130.0 mm |
+
+## Inner Fixture Opening
+
+| Parameter | Value |
+|---|---|
+| Width | 153.4 mm |
+| Height | 87.0 mm |
+
+The inner opening defines the usable panel area.
+
+The region between the outer frame and inner opening forms the fixture rails.
+
+---
+
+# Alignment Pins
+
+The script inserts four non-plated alignment holes:
+
+- Diameter: `Ø 3.172 mm NPTH`
+- Naming: `PIN1`–`PIN4`
+- Positioning: fully user-defined absolute coordinates
+
+This allows:
+
+- deterministic CNC coordinates
+- compatibility with existing jigs
+- custom asymmetric fixtures
+- reuse across multiple panel layouts
+
+---
+
+# Coordinate System
+
+After processing:
+
+- The fixture outer top-left corner is positioned at `(0, 0)`
+- All PCB data is translated accordingly
+- Every generated panel shares the same global coordinate system
+
+This creates deterministic CAM output suitable for automated tooling and
+repeatable fixture-based manufacturing.
+
+---
+
+# Usage
+
+Place `fixture_postprocess.py` next to the source `.kicad_pcb` file and run KiKit:
+
+```bash
 kikit panelize \
-    --layout 'type: grid; rows: 1; cols: 2; space: 0mm' \
+    -p myPreset.json \
-    --tabs 'type: fixed; width: 48mm; vcount: 1' \
+    ../Flow_Controller.kicad_pcb \
-    --cuts 'type: mousebites; drill: 1mm; spacing: 1.5mm' \
+    panel/Flow_Controller_Panel.kicad_pcb
-    --post 'origin: tl; script: move_to_origin.py' \
-    --framing 'type: none' \
-    ../Flow_Controller.kicad_pcb panel/Flow_Controller_Panel.kicad_pcb
 ```
 
-![Panel](../images/Flow_Controller_panel.png)
+---
+
+# Panel Layout Parameters
+
+## Grid Layout
+
+Adjust the panel dimensions using:
+
+```text
+rows: <n>
+cols: <n>
+```
+
+Examples:
+
+- `1×1`
+- `1×2`
+- `2×2`
+
+The script automatically recalculates centering offsets for the resulting panel size.
+
+---
+
+## Tool Diameter Compensation
+
+The following values should match the routing tool diameter:
+
+```text
+space
+slotwidth
+```
+
+Example:
+
+```text
+space: 2.1mm
+slotwidth: 2.1mm
+```
+
+This is typically equal to the outline routing bit diameter.
+
+---
+
+# Processing Pipeline
+
+The post-processing script performs the following operations:
+
+1. Reads the fully panelized KiKit output
+2. Calculates the panel bounding box
+3. Calculates the offset required to centre the panel inside the fixture opening
+4. Translates the complete board dataset:
+   - footprints
+   - tracks
+   - vias
+   - zones
+   - drawings
+   - board outlines
+   - substrate geometry
+   - locked items
+5. Places four NPTH alignment pin footprints
+6. Draws fixture reference rectangles on the `User.1` layer
+7. Repositions the design so the fixture outer top-left corner equals `(0, 0)`
+
+---
+
+# Fixture Visualization
+
+The script draws two rectangles on the `User.1` layer:
+
+- Outer fixture boundary
+- Inner fixture opening
+
+These graphics:
+
+- are visible in KiCad
+- help verify positioning visually
+- are NOT placed on `Edge.Cuts`
+- are NOT exported into manufacturing Gerbers or NC drill files
+
+They exist purely as fixture reference geometry.
+
+---
+
+# CNC Workflow
+
+| Operation | File | Purpose |
+|---|---|---|
+| Drilling | Excellon `.drl` | PCB holes + fixture alignment pins |
+| Routing | `Edge.Cuts` Gerber | Board outlines and mousebite tabs |
+| UV exposure | Copper Gerbers | Soldermask/alignment registration |
+
+Because all outputs share:
+
+- identical `(0,0)` origin
+- identical alignment pin locations
+- identical fixture geometry
+
+the PCB can remain mounted in the same physical fixture for the complete process.
+
+No re-alignment or re-fixturing is required between operations.
+
+---
+
+# Alignment Pins
+
+The script inserts four non-plated alignment holes:
+
+- Diameter: `Ø 3.172 mm NPTH`
+- Naming: `PIN1`–`PIN4`
+
+Users may override any coordinate manually.
+
+---
+
+# Default Pin Placement Calculation
+
+For the default fixture dimensions:
+
+```python
+OUTER_W_MM = 200.0
+OUTER_H_MM = 130.0
+
+INNER_W_MM = 153.4
+INNER_H_MM = 87.0
+```
+
+the resulting suggested coordinates are:
+
+| Pin | X (mm) | Y (mm) |
+|---|---|---|
+| PIN1 (top) | 100.0 | 10.75 |
+| PIN2 (right) | 188.35 | 65.0 |
+| PIN3 (bottom) | 100.0 | 119.25 |
+| PIN4 (left) | 11.65 | 65.0 |
+
+---
+
+# Fixture Configuration
+
+Edit the constants at the top of `fixture_postprocess.py`:
+
+```python
+# ============================================================
+# Fixture geometry
+# ============================================================
+
+OUTER_W_MM = 200.0
+OUTER_H_MM = 130.0
+
+INNER_W_MM = 153.4
+INNER_H_MM = 87.0
+
+# ============================================================
+# Alignment pins
+# Absolute fixture-space coordinates in millimetres
+# ============================================================
+
+PIN_DIAMETER_MM = 3.172
+
+# Suggested defaults:
+# top    = centered in top rail
+# right  = centered in right rail
+# bottom = centered in bottom rail
+# left   = centered in left rail
+
+PIN1_X_MM = 100.0
+PIN1_Y_MM = 10.75
+
+PIN2_X_MM = 188.35
+PIN2_Y_MM = 65.0
+
+PIN3_X_MM = 100.0
+PIN3_Y_MM = 119.25
+
+PIN4_X_MM = 11.65
+PIN4_Y_MM = 65.0
+```
+
+These values may be adjusted freely without changing the placement logic.
+---
+
+# Design Constraints
+
+The generated panel must fit completely inside the inner fixture opening.
+
+If the panel exceeds the available space, the script emits:
+
+```text
+WARNING: panel … is larger than the inner opening
+```
+
+Possible solutions:
+
+- reduce `rows`
+- reduce `cols`
+- reduce KiKit frame width
+- reduce spacing
+- use a smaller PCB design
+
+---
+
+# Intended Use Case
+
+This workflow is intended for:
+
+- CNC isolation milling
+- UV mask alignment systems
+- repeatable prototyping fixtures
+- hybrid PCB manufacturing workflows
+- automated or semi-automated PCB handling
+
+The primary design goal is deterministic panel placement independent of PCB size.
 
 ## Exporting gcode files from KiCad
 

scripts/fixture_postprocess.py

@@ -0,0 +1,232 @@
+import math
+import pcbnew
+from shapely.affinity import translate
+
+
+# ============================================================
+# Fixture geometry
+# ============================================================
+OUTER_W_MM  = 200.0
+OUTER_H_MM  = 130.0
+
+INNER_W_MM  = 153.4
+INNER_H_MM  =  87.0
+
+INNER_X_MM  = (OUTER_W_MM - INNER_W_MM) / 2   # 23.3
+INNER_Y_MM  = (OUTER_H_MM - INNER_H_MM) / 2   # 21.5
+
+
+# ============================================================
+# Alignment pins
+# Absolute fixture-space coordinates in millimetres
+# ============================================================
+PIN_DIAMETER_MM = 3.172
+
+# Suggested defaults:
+# top    = centered in top rail
+# right  = centered in right rail
+# bottom = centered in bottom rail
+# left   = centered in left rail
+
+PIN1_X_MM = 100.0
+PIN1_Y_MM = 10.75
+
+PIN2_X_MM = 188.35
+PIN2_Y_MM = 65.0
+
+PIN3_X_MM = 100.0
+PIN3_Y_MM = 119.25
+
+PIN4_X_MM = 11.65
+PIN4_Y_MM = 65.0
+
+# KiCad internal unit: 1 mm = 1 000 000 nm
+MM = 1_000_000
+
+
+def mm(v: float) -> int:
+    """Convert mm float to KiCad internal units (nm)."""
+    return int(round(v * MM))
+
+
+def _move_all(panel, dx_nm: int, dy_nm: int) -> None:
+    """Translate every object on the board by (dx_nm, dy_nm)."""
+    vec = pcbnew.VECTOR2I(dx_nm, dy_nm)
+    for fp in panel.board.GetFootprints():
+        fp.Move(vec)
+    for track in panel.board.GetTracks():
+        track.Move(vec)
+    for drawing in panel.board.GetDrawings():
+        drawing.Move(vec)
+    for zone in panel.board.Zones():
+        zone.Move(vec)
+    # Keep the Shapely substrate in sync
+    panel.boardSubstrate.substrates = translate(
+        panel.boardSubstrate.substrates,
+        xoff=dx_nm,
+        yoff=dy_nm,
+    )
+
+
+def _edge_cuts_bbox(panel):
+    """Return (minx, miny, maxx, maxy) in nm from the Shapely substrate."""
+    return panel.boardSubstrate.substrates.bounds   # already in nm
+
+
+def _draw_rect(board, layer, x0_nm, y0_nm, x1_nm, y1_nm, width_nm=None):
+    """Draw an axis-aligned rectangle on *layer* using four PCB_SHAPE lines."""
+    if width_nm is None:
+        width_nm = mm(0.1)   # 0.1 mm line width – thin reference line
+    corners = [
+        (x0_nm, y0_nm), (x1_nm, y0_nm),
+        (x1_nm, y1_nm), (x0_nm, y1_nm),
+    ]
+    for i in range(4):
+        seg = pcbnew.PCB_SHAPE(board)
+        seg.SetShape(pcbnew.SHAPE_T_SEGMENT)
+        seg.SetLayer(layer)
+        seg.SetWidth(width_nm)
+        x_a, y_a = corners[i]
+        x_b, y_b = corners[(i + 1) % 4]
+        seg.SetStart(pcbnew.VECTOR2I(x_a, y_a))
+        seg.SetEnd(pcbnew.VECTOR2I(x_b, y_b))
+        board.Add(seg)
+
+
+def _draw_circle(board, layer, cx_nm, cy_nm, r_nm, width_nm=None):
+    """Draw a circle on *layer*."""
+    if width_nm is None:
+        width_nm = mm(0.1)
+    circ = pcbnew.PCB_SHAPE(board)
+    circ.SetShape(pcbnew.SHAPE_T_CIRCLE)
+    circ.SetLayer(layer)
+    circ.SetWidth(width_nm)
+    circ.SetCenter(pcbnew.VECTOR2I(cx_nm, cy_nm))
+    circ.SetEnd(pcbnew.VECTOR2I(cx_nm + r_nm, cy_nm))
+    board.Add(circ)
+
+
+def _add_pin_footprint(board, x_nm, y_nm, diameter_mm, index):
+    """
+    Add a non-plated through-hole (NPTH) mounting hole footprint at (x_nm, y_nm).
+
+    We create a minimal footprint with a single NPTH pad so that:
+      • The drill appears in the Excellon output  →  used for physical alignment pins.
+      • No copper ring is added.
+    """
+    fp = pcbnew.FOOTPRINT(board)
+    fp.SetReference(f"PIN{index}")
+    fp.Reference().SetVisible(False)
+    fp.SetValue(f"Ø{diameter_mm:.3f}mm NPTH")
+    fp.Value().SetVisible(False)
+    fp.SetPosition(pcbnew.VECTOR2I(x_nm, y_nm))
+
+    pad = pcbnew.PAD(fp)
+    pad.SetAttribute(pcbnew.PAD_ATTRIB_NPTH)
+    pad.SetShape(pcbnew.PAD_SHAPE_CIRCLE)
+    pad.SetDrillShape(pcbnew.PAD_DRILL_SHAPE_CIRCLE)
+
+    d_nm = mm(diameter_mm)
+    pad.SetSize(pcbnew.VECTOR2I(d_nm, d_nm))
+    pad.SetDrillSize(pcbnew.VECTOR2I(d_nm, d_nm))
+    pad.SetLayerSet(pcbnew.LSET.AllCuMask())   # NPTH pads span all Cu layers
+    pad.SetNumber("")
+
+    fp.Add(pad)
+    board.Add(fp)
+
+    # Also draw a circle on Dwgs_User so the pin is visible even without
+    # the fab/courtyard layers being turned on.
+    _draw_circle(
+        board,
+        pcbnew.Dwgs_User,
+        x_nm, y_nm,
+        mm(diameter_mm / 2),
+        mm(0.1),
+    )
+
+    return fp
+
+
+# ──────────────────────────────────────────────────────────────
+# MAIN ENTRY POINT
+# ──────────────────────────────────────────────────────────────
+def kikitPostprocess(panel, args):
+    board = panel.board
+
+    # ── Step 1: get current Edge.Cuts bounding box ────────────────────────────
+    bounds = _edge_cuts_bbox(panel)          # (minx, miny, maxx, maxy) in nm
+    panel_w_nm = bounds[2] - bounds[0]
+    panel_h_nm = bounds[3] - bounds[1]
+
+    panel_w_mm = panel_w_nm / MM
+    panel_h_mm = panel_h_nm / MM
+
+    print(f"[fixture] Panel size: {panel_w_mm:.3f} x {panel_h_mm:.3f} mm")
+
+    # ── Step 2: compute where panel top-left should land ─────────────────────
+    # We want the panel centred inside the inner opening of the fixture.
+    # Inner opening: top-left is at (INNER_X_MM, INNER_Y_MM) relative to
+    # the fixture outer top-left.
+    panel_target_x_mm = INNER_X_MM + (INNER_W_MM - panel_w_mm) / 2
+    panel_target_y_mm = INNER_Y_MM + (INNER_H_MM - panel_h_mm) / 2
+
+    print(f"[fixture] Panel will be placed at ({panel_target_x_mm:.3f}, {panel_target_y_mm:.3f}) mm")
+
+    # Warn if the panel is larger than the inner opening (it will still be
+    # centred but will overlap the frame rails).
+    if panel_w_mm > INNER_W_MM or panel_h_mm > INNER_H_MM:
+        print(
+            f"[fixture] WARNING: panel ({panel_w_mm:.1f}×{panel_h_mm:.1f} mm) "
+            f"is larger than the inner opening ({INNER_W_MM}×{INNER_H_MM} mm)!"
+        )
+
+    # ── Step 3: move everything so that the panel lands at the target ─────────
+    # Current panel TL is at (bounds[0], bounds[1]).
+    # We need to shift by (target - current).
+    dx_nm = mm(panel_target_x_mm) - bounds[0]
+    dy_nm = mm(panel_target_y_mm) - bounds[1]
+    _move_all(panel, int(dx_nm), int(dy_nm))
+
+    # ── Step 4: verify final position ────────────────────────────────────────
+    new_bounds = _edge_cuts_bbox(panel)
+    print(
+        f"[fixture] Panel TL after move: "
+        f"({new_bounds[0]/MM:.3f}, {new_bounds[1]/MM:.3f}) mm"
+    )
+
+    # ── Step 5: draw fixture frame on Dwgs_User ───────────────────────────
+    # Outer rectangle: (0,0) → (200, 130) mm
+    _draw_rect(
+        board, pcbnew.Dwgs_User,
+        mm(0),          mm(0),
+        mm(OUTER_W_MM), mm(OUTER_H_MM),
+        mm(0.15),
+    )
+    # Inner rectangle: (23.3, 21.5) → (176.7, 108.5) mm
+    _draw_rect(
+        board, pcbnew.Dwgs_User,
+        mm(INNER_X_MM),              mm(INNER_Y_MM),
+        mm(INNER_X_MM + INNER_W_MM), mm(INNER_Y_MM + INNER_H_MM),
+        mm(0.15),
+    )
+
+    print("[fixture] Fixture frame drawn on Dwgs_User layer.")
+
+    # ── Step 6: add alignment pin footprints ──────────────────────────────────
+    # Place pins at the absolute coordinates defined in the configuration block above
+    pin_positions_mm = [
+        (PIN1_X_MM, PIN1_Y_MM, "PIN1 (Top)"),
+        (PIN2_X_MM, PIN2_Y_MM, "PIN2 (Right)"),
+        (PIN3_X_MM, PIN3_Y_MM, "PIN3 (Bottom)"),
+        (PIN4_X_MM, PIN4_Y_MM, "PIN4 (Left)"),
+    ]
+    
+    for idx, (px_mm, py_mm, label) in enumerate(pin_positions_mm, start=1):
+        _add_pin_footprint(board, mm(px_mm), mm(py_mm), PIN_DIAMETER_MM, idx)
+        print(
+            f"[fixture] {label} placed at "
+            f"({px_mm:.3f}, {py_mm:.3f}) mm"
+        )
+
+    print("[fixture] Post-processing complete.")

scripts/gcode/contentions_back.svg

@@ -0,0 +1,15 @@
+<?xml version="1.0" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
+"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg width="418.014" height="221.1" viewBox="0 0 8708.63 4606.25" version="1.1"
+xmlns="http://www.w3.org/2000/svg"
+xmlns:xlink="http://www.w3.org/1999/xlink">
+<polyline points="1970.1,4028.53 1970.01,4028.52 1969.62,4028.52 1969.55,4028.53" style="stroke:rgb(255,0,0);stroke-width:3.937008;fill:none;stroke-opacity:0.5;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="1970.1,4028.53 1970.01,4028.52 1969.62,4028.52 1969.55,4028.53" style="stroke:rgb(0,0,0);stroke-width:1px;fill:none;stroke-opacity:1;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="1969.52,4028.53 1969.62,4028.52 1970.01,4028.52 1970.12,4028.53" style="stroke:rgb(255,0,0);stroke-width:3.937008;fill:none;stroke-opacity:0.5;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="1969.52,4028.53 1969.62,4028.52 1970.01,4028.52 1970.12,4028.53" style="stroke:rgb(0,0,0);stroke-width:1px;fill:none;stroke-opacity:1;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="6072.67,4028.57 6072.5,4028.56 6072.37,4028.54 6071.98,4028.53 6071.88,4028.53" style="stroke:rgb(255,0,0);stroke-width:3.937008;fill:none;stroke-opacity:0.5;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="6072.67,4028.57 6072.5,4028.56 6072.37,4028.54 6071.98,4028.53 6071.88,4028.53" style="stroke:rgb(0,0,0);stroke-width:1px;fill:none;stroke-opacity:1;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="6071.86,4028.54 6071.98,4028.53 6072.37,4028.54 6072.5,4028.56 6072.7,4028.57" style="stroke:rgb(255,0,0);stroke-width:3.937008;fill:none;stroke-opacity:0.5;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="6071.86,4028.54 6071.98,4028.53 6072.37,4028.54 6072.5,4028.56 6072.7,4028.57" style="stroke:rgb(0,0,0);stroke-width:1px;fill:none;stroke-opacity:1;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+</svg>

scripts/gcode/contentions_back_final.svg

@@ -0,0 +1,11 @@
+<?xml version="1.0" standalone="no"?>
+<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
+"http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
+<svg width="418.014" height="221.1" viewBox="0 0 8708.63 4606.25" version="1.1"
+xmlns="http://www.w3.org/2000/svg"
+xmlns:xlink="http://www.w3.org/1999/xlink">
+<polyline points="1969.56,4028.53 1970.06,4028.53" style="stroke:rgb(255,0,0);stroke-width:3.937008;fill:none;stroke-opacity:0.5;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="1969.56,4028.53 1970.06,4028.53" style="stroke:rgb(0,0,0);stroke-width:1px;fill:none;stroke-opacity:1;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="1970.06,4028.53 1969.56,4028.53" style="stroke:rgb(255,0,0);stroke-width:3.937008;fill:none;stroke-opacity:0.5;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+<polyline points="1970.06,4028.53 1969.56,4028.53" style="stroke:rgb(0,0,0);stroke-width:1px;fill:none;stroke-opacity:1;stroke-linecap:round;stroke-linejoin:round;;fill:none"/>
+</svg>

scripts/gcode/drill.ngc

@@ -20,235 +20,346 @@ G0 Z2.00000
 G04 P1.00000
 
 G1 F500.00000
-G0 X4.60000 Y-4.60000
+G0 X0.00000 Y-10.75000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X12.15400 Y-6.09600
+G0 X29.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X14.69400 Y-6.09600
+G0 X28.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X17.23400 Y-6.09600
+G0 X27.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X5.45000 Y-13.00000
+G0 X26.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X5.45000 Y-15.50000
+G0 X25.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X5.45000 Y-18.00000
+G0 X24.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X4.60000 Y-45.40000
+G0 X23.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X20.00000 Y-44.91800
+G0 X20.36700 Y-45.14700
 G1 Z-2.20000
 G1 Z2.00000
-G0 X20.00000 Y-42.41800
+G0 X14.13000 Y-45.55000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X20.00000 Y-39.91800
+G0 X11.59000 Y-45.55000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X32.15000 Y-29.42500
+G0 X9.05000 Y-45.55000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X32.25000 Y-25.67500
+G0 X4.05000 Y-43.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X42.63400 Y-16.12000
+G0 X-4.05000 Y-43.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X42.63400 Y-18.66000
+G0 X-8.84800 Y-45.17900
 G1 Z-2.20000
 G1 Z2.00000
-G0 X42.63400 Y-21.20000
+G0 X-8.41600 Y-56.12000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X42.63400 Y-23.74000
+G0 X-8.41600 Y-58.66000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X42.63400 Y-26.28000
+G0 X-8.41600 Y-61.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X42.63400 Y-28.82000
+G0 X-8.41600 Y-63.74000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X42.63400 Y-31.36000
+G0 X-8.41600 Y-66.28000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X42.63400 Y-33.90000
+G0 X-8.41600 Y-68.82000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X45.40000 Y-45.40000
+G0 X-8.41600 Y-71.36000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-48.00000
+G0 X-1.25000 Y-62.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-46.46700
+G0 X-1.25000 Y-63.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X54.60000 Y-45.40000
+G0 X-1.25000 Y-64.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-44.93300
+G0 X-1.25000 Y-65.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-43.40000
+G0 X-1.25000 Y-66.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-41.86700
+G0 X-1.25000 Y-67.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-40.33300
+G0 X-8.41600 Y-73.90000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-38.80000
+G0 X-18.90000 Y-69.42500
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-37.26700
+G0 X-18.80000 Y-65.67500
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-35.73300
+G0 X-31.73300 Y-45.14700
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-34.20000
+G0 X-23.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-32.66700
+G0 X-24.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-31.13300
+G0 X-25.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-29.60000
+G0 X-26.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-28.06700
+G0 X-27.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-26.53300
+G0 X-28.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-25.00000
+G0 X-29.05000 Y-40.20000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-23.46700
+G0 X-37.97000 Y-45.55000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-21.93300
+G0 X-40.51000 Y-45.55000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-20.40000
+G0 X-45.60000 Y-53.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-18.86700
+G0 X-45.60000 Y-55.50000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-17.33300
+G0 X-43.05000 Y-45.55000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-15.80000
+G0 X-48.05000 Y-43.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-14.26700
+G0 X-88.35000 Y-65.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-12.73300
+G0 X-50.85000 Y-62.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-11.20000
+G0 X-45.60000 Y-58.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-9.66700
+G0 X-50.85000 Y-63.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-8.13300
+G0 X-50.85000 Y-64.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X45.40000 Y-4.60000
+G0 X-50.85000 Y-65.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-6.60000
+G0 X-50.85000 Y-66.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-5.06700
+G0 X-50.85000 Y-67.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-3.53300
+G0 X-50.85000 Y-68.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X50.00000 Y-2.00000
+G0 X-45.65000 Y-73.85000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X54.60000 Y-4.60000
+G0 X-45.65000 Y-76.35000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X62.15400 Y-6.09600
+G0 X-45.65000 Y-78.85000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X64.69400 Y-6.09600
+G0 X-48.05000 Y-87.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X67.23400 Y-6.09600
+G0 X-31.78400 Y-84.82200
 G1 Z-2.20000
 G1 Z2.00000
-G0 X55.45000 Y-13.00000
+G0 X-29.05000 Y-89.80000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X55.45000 Y-15.50000
+G0 X-28.05000 Y-89.80000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X55.45000 Y-18.00000
+G0 X-27.05000 Y-89.80000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X70.00000 Y-39.91800
+G0 X-26.05000 Y-89.80000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X70.00000 Y-42.41800
+G0 X-25.05000 Y-89.80000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X70.00000 Y-44.91800
+G0 X-24.05000 Y-89.80000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X95.40000 Y-45.40000
+G0 X-23.05000 Y-89.80000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X92.63400 Y-33.90000
+G0 X-8.92400 Y-84.84700
 G1 Z-2.20000
 G1 Z2.00000
-G0 X92.63400 Y-31.36000
+G0 X-4.05000 Y-87.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X92.63400 Y-28.82000
+G0 X4.05000 Y-87.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X92.63400 Y-26.28000
+G0 X6.45000 Y-78.85000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X82.25000 Y-25.67500
+G0 X6.45000 Y-76.35000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X82.15000 Y-29.42500
+G0 X6.45000 Y-73.85000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X92.63400 Y-23.74000
+G0 X1.25000 Y-68.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X92.63400 Y-21.20000
+G0 X-1.25000 Y-68.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X92.63400 Y-18.66000
+G0 X1.25000 Y-67.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X92.63400 Y-16.12000
+G0 X1.25000 Y-66.00000
 G1 Z-2.20000
 G1 Z2.00000
-G0 X95.40000 Y-4.60000
+G0 X1.25000 Y-65.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X1.25000 Y-64.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X1.25000 Y-63.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X1.25000 Y-62.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X6.50000 Y-58.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X6.50000 Y-55.50000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X6.50000 Y-53.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X33.30000 Y-65.67500
+G1 Z-2.20000
+G1 Z2.00000
+G0 X33.20000 Y-69.42500
+G1 Z-2.20000
+G1 Z2.00000
+G0 X20.31600 Y-84.82200
+G1 Z-2.20000
+G1 Z2.00000
+G0 X23.05000 Y-89.80000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X24.05000 Y-89.80000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X25.05000 Y-89.80000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X26.05000 Y-89.80000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X27.05000 Y-89.80000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X0.00000 Y-119.25000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X28.05000 Y-89.80000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X29.05000 Y-89.80000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.17600 Y-84.84700
+G1 Z-2.20000
+G1 Z2.00000
+G0 X48.05000 Y-87.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.68400 Y-73.90000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.68400 Y-71.36000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.68400 Y-68.82000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.68400 Y-66.28000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.68400 Y-63.74000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X50.85000 Y-68.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X50.85000 Y-67.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X50.85000 Y-66.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X50.85000 Y-65.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X50.85000 Y-64.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X50.85000 Y-63.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X50.85000 Y-62.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.68400 Y-61.20000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.68400 Y-58.66000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.68400 Y-56.12000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X43.25200 Y-45.17900
+G1 Z-2.20000
+G1 Z2.00000
+G0 X48.05000 Y-43.00000
+G1 Z-2.20000
+G1 Z2.00000
+G0 X88.35000 Y-65.00000
 G1 Z-2.20000
 G1 Z2.00000
 

scripts/gcode/original_drill.svg

@@ -1,84 +1,121 @@
 <?xml version="1.0" standalone="no"?>
 <!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1//EN"
 "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11.dtd">
-<svg width="394.205" height="205.228" viewBox="0 0 8212.6 4275.59" version="1.1"
+<svg width="418.014" height="221.1" viewBox="0 0 8708.63 4606.25" version="1.1"
 xmlns="http://www.w3.org/2000/svg"
 xmlns:xlink="http://www.w3.org/1999/xlink">
-<circle cx="7681.1" cy="531.496" r="37.4016" style=""/>
+<circle cx="4354.33" cy="-1968.53" r="37.4016" style=""/>
-<circle cx="7086.3" cy="649.291" r="37.4016" style=""/>
+<circle cx="2066.93" cy="350.371" r="37.4016" style=""/>
-<circle cx="6886.3" cy="649.291" r="37.4016" style=""/>
+<circle cx="2145.67" cy="350.371" r="37.4016" style=""/>
-<circle cx="6686.3" cy="649.291" r="37.4016" style=""/>
+<circle cx="2224.41" cy="350.371" r="37.4016" style=""/>
-<circle cx="7614.17" cy="1192.91" r="37.4016" style=""/>
+<circle cx="2303.15" cy="350.371" r="37.4016" style=""/>
-<circle cx="7614.17" cy="1389.76" r="37.4016" style=""/>
+<circle cx="2381.89" cy="350.371" r="37.4016" style=""/>
-<circle cx="7614.17" cy="1586.61" r="37.4016" style=""/>
+<circle cx="2460.63" cy="350.371" r="37.4016" style=""/>
-<circle cx="7681.1" cy="3744.09" r="37.4016" style=""/>
+<circle cx="2539.37" cy="350.371" r="37.4016" style=""/>
-<circle cx="6468.5" cy="3706.14" r="37.4016" style=""/>
+<circle cx="2750.63" cy="739.899" r="37.4016" style=""/>
-<circle cx="6468.5" cy="3509.29" r="37.4016" style=""/>
+<circle cx="3241.73" cy="771.631" r="37.4016" style=""/>
-<circle cx="6468.5" cy="3312.44" r="37.4016" style=""/>
+<circle cx="3441.73" cy="771.631" r="37.4016" style=""/>
-<circle cx="5511.81" cy="2486.22" r="37.4016" style=""/>
+<circle cx="3641.73" cy="771.631" r="37.4016" style=""/>
-<circle cx="5503.94" cy="2190.94" r="37.4016" style=""/>
+<circle cx="4035.43" cy="570.844" r="37.4016" style=""/>
-<circle cx="4686.3" cy="1438.58" r="37.4016" style=""/>
+<circle cx="4673.23" cy="570.844" r="37.4016" style=""/>
-<circle cx="4686.3" cy="1638.58" r="37.4016" style=""/>
+<circle cx="5051.02" cy="742.419" r="37.4016" style=""/>
-<circle cx="4686.3" cy="1838.58" r="37.4016" style=""/>
+<circle cx="5017.01" cy="1603.91" r="37.4016" style=""/>
-<circle cx="4686.3" cy="2038.58" r="37.4016" style=""/>
+<circle cx="5017.01" cy="1803.91" r="37.4016" style=""/>
-<circle cx="4686.3" cy="2238.58" r="37.4016" style=""/>
+<circle cx="5017.01" cy="2003.91" r="37.4016" style=""/>
-<circle cx="4686.3" cy="2438.58" r="37.4016" style=""/>
+<circle cx="5017.01" cy="2203.91" r="37.4016" style=""/>
-<circle cx="4686.3" cy="2638.58" r="37.4016" style=""/>
+<circle cx="5017.01" cy="2403.91" r="37.4016" style=""/>
-<circle cx="4686.3" cy="2838.58" r="37.4016" style=""/>
+<circle cx="5017.01" cy="2603.91" r="37.4016" style=""/>
-<circle cx="4468.5" cy="3744.09" r="37.4016" style=""/>
+<circle cx="5017.01" cy="2803.91" r="37.4016" style=""/>
-<circle cx="4106.3" cy="3948.82" r="37.4016" style=""/>
+<circle cx="4452.76" cy="2066.91" r="37.4016" style=""/>
-<circle cx="4106.3" cy="3828.11" r="37.4016" style=""/>
+<circle cx="4452.76" cy="2145.65" r="37.4016" style=""/>
-<circle cx="3744.09" cy="3744.09" r="37.4016" style=""/>
+<circle cx="4452.76" cy="2224.39" r="37.4016" style=""/>
-<circle cx="4106.3" cy="3707.32" r="37.4016" style=""/>
+<circle cx="4452.76" cy="2303.13" r="37.4016" style=""/>
-<circle cx="4106.3" cy="3586.61" r="37.4016" style=""/>
+<circle cx="4452.76" cy="2381.87" r="37.4016" style=""/>
-<circle cx="4106.3" cy="3465.91" r="37.4016" style=""/>
+<circle cx="4452.76" cy="2460.61" r="37.4016" style=""/>
-<circle cx="4106.3" cy="3345.12" r="37.4016" style=""/>
+<circle cx="5017.01" cy="3003.91" r="37.4016" style=""/>
-<circle cx="4106.3" cy="3224.41" r="37.4016" style=""/>
+<circle cx="5842.52" cy="2651.55" r="37.4016" style=""/>
-<circle cx="4106.3" cy="3103.7" r="37.4016" style=""/>
+<circle cx="5834.65" cy="2356.28" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2982.91" r="37.4016" style=""/>
+<circle cx="6852.99" cy="739.899" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2862.2" r="37.4016" style=""/>
+<circle cx="6169.29" cy="350.371" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2741.5" r="37.4016" style=""/>
+<circle cx="6248.03" cy="350.371" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2620.71" r="37.4016" style=""/>
+<circle cx="6326.77" cy="350.371" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2500" r="37.4016" style=""/>
+<circle cx="6405.51" cy="350.371" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2379.29" r="37.4016" style=""/>
+<circle cx="6484.25" cy="350.371" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2258.5" r="37.4016" style=""/>
+<circle cx="6562.99" cy="350.371" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2137.8" r="37.4016" style=""/>
+<circle cx="6641.73" cy="350.371" r="37.4016" style=""/>
-<circle cx="4106.3" cy="2017.09" r="37.4016" style=""/>
+<circle cx="7344.09" cy="771.631" r="37.4016" style=""/>
-<circle cx="4106.3" cy="1896.3" r="37.4016" style=""/>
+<circle cx="7544.09" cy="771.631" r="37.4016" style=""/>
-<circle cx="4106.3" cy="1775.59" r="37.4016" style=""/>
+<circle cx="7944.88" cy="1358.25" r="37.4016" style=""/>
-<circle cx="4106.3" cy="1654.88" r="37.4016" style=""/>
+<circle cx="7944.88" cy="1555.1" r="37.4016" style=""/>
-<circle cx="4106.3" cy="1534.09" r="37.4016" style=""/>
+<circle cx="7744.09" cy="771.631" r="37.4016" style=""/>
-<circle cx="4106.3" cy="1413.39" r="37.4016" style=""/>
+<circle cx="8137.8" cy="570.844" r="37.4016" style=""/>
-<circle cx="4106.3" cy="1292.68" r="37.4016" style=""/>
+<circle cx="11311" cy="2303.13" r="37.4016" style=""/>
-<circle cx="4106.3" cy="1171.89" r="37.4016" style=""/>
+<circle cx="8358.27" cy="2066.91" r="37.4016" style=""/>
-<circle cx="4106.3" cy="1051.18" r="37.4016" style=""/>
+<circle cx="7944.88" cy="1751.95" r="37.4016" style=""/>
-<circle cx="4106.3" cy="930.472" r="37.4016" style=""/>
+<circle cx="8358.27" cy="2145.65" r="37.4016" style=""/>
-<circle cx="4106.3" cy="809.685" r="37.4016" style=""/>
+<circle cx="8358.27" cy="2224.39" r="37.4016" style=""/>
-<circle cx="4468.5" cy="531.496" r="37.4016" style=""/>
+<circle cx="8358.27" cy="2303.13" r="37.4016" style=""/>
-<circle cx="4106.3" cy="688.976" r="37.4016" style=""/>
+<circle cx="8358.27" cy="2381.87" r="37.4016" style=""/>
-<circle cx="4106.3" cy="568.268" r="37.4016" style=""/>
+<circle cx="8358.27" cy="2460.61" r="37.4016" style=""/>
-<circle cx="4106.3" cy="447.48" r="37.4016" style=""/>
+<circle cx="8358.27" cy="2539.35" r="37.4016" style=""/>
-<circle cx="4106.3" cy="326.772" r="37.4016" style=""/>
+<circle cx="7948.82" cy="2999.98" r="37.4016" style=""/>
-<circle cx="3744.09" cy="531.496" r="37.4016" style=""/>
+<circle cx="7948.82" cy="3196.83" r="37.4016" style=""/>
-<circle cx="3149.29" cy="649.291" r="37.4016" style=""/>
+<circle cx="7948.82" cy="3393.68" r="37.4016" style=""/>
-<circle cx="2949.29" cy="649.291" r="37.4016" style=""/>
+<circle cx="8137.8" cy="4035.41" r="37.4016" style=""/>
-<circle cx="2749.29" cy="649.291" r="37.4016" style=""/>
+<circle cx="6857.01" cy="3863.91" r="37.4016" style=""/>
-<circle cx="3677.17" cy="1192.91" r="37.4016" style=""/>
+<circle cx="6641.73" cy="4255.88" r="37.4016" style=""/>
-<circle cx="3677.17" cy="1389.76" r="37.4016" style=""/>
+<circle cx="6562.99" cy="4255.88" r="37.4016" style=""/>
-<circle cx="3677.17" cy="1586.61" r="37.4016" style=""/>
+<circle cx="6484.25" cy="4255.88" r="37.4016" style=""/>
-<circle cx="2531.5" cy="3312.44" r="37.4016" style=""/>
+<circle cx="6405.51" cy="4255.88" r="37.4016" style=""/>
-<circle cx="2531.5" cy="3509.29" r="37.4016" style=""/>
+<circle cx="6326.77" cy="4255.88" r="37.4016" style=""/>
-<circle cx="2531.5" cy="3706.14" r="37.4016" style=""/>
+<circle cx="6248.03" cy="4255.88" r="37.4016" style=""/>
-<circle cx="531.496" cy="3744.09" r="37.4016" style=""/>
+<circle cx="6169.29" cy="4255.88" r="37.4016" style=""/>
-<circle cx="749.291" cy="2838.58" r="37.4016" style=""/>
+<circle cx="5057.01" cy="3865.88" r="37.4016" style=""/>
-<circle cx="749.291" cy="2638.58" r="37.4016" style=""/>
+<circle cx="4673.23" cy="4035.41" r="37.4016" style=""/>
-<circle cx="749.291" cy="2438.58" r="37.4016" style=""/>
+<circle cx="4035.43" cy="4035.41" r="37.4016" style=""/>
-<circle cx="749.291" cy="2238.58" r="37.4016" style=""/>
+<circle cx="3846.46" cy="3393.68" r="37.4016" style=""/>
-<circle cx="1566.93" cy="2190.94" r="37.4016" style=""/>
+<circle cx="3846.46" cy="3196.83" r="37.4016" style=""/>
-<circle cx="1574.8" cy="2486.22" r="37.4016" style=""/>
+<circle cx="3846.46" cy="2999.98" r="37.4016" style=""/>
-<circle cx="749.291" cy="2038.58" r="37.4016" style=""/>
+<circle cx="4255.91" cy="2539.35" r="37.4016" style=""/>
-<circle cx="749.291" cy="1838.58" r="37.4016" style=""/>
+<circle cx="4452.76" cy="2539.35" r="37.4016" style=""/>
-<circle cx="749.291" cy="1638.58" r="37.4016" style=""/>
+<circle cx="4255.91" cy="2460.61" r="37.4016" style=""/>
-<circle cx="749.291" cy="1438.58" r="37.4016" style=""/>
+<circle cx="4255.91" cy="2381.87" r="37.4016" style=""/>
-<circle cx="531.496" cy="531.496" r="37.4016" style=""/>
+<circle cx="4255.91" cy="2303.13" r="37.4016" style=""/>
+<circle cx="4255.91" cy="2224.39" r="37.4016" style=""/>
+<circle cx="4255.91" cy="2145.65" r="37.4016" style=""/>
+<circle cx="4255.91" cy="2066.91" r="37.4016" style=""/>
+<circle cx="3842.52" cy="1751.95" r="37.4016" style=""/>
+<circle cx="3842.52" cy="1555.1" r="37.4016" style=""/>
+<circle cx="3842.52" cy="1358.25" r="37.4016" style=""/>
+<circle cx="1732.28" cy="2356.28" r="37.4016" style=""/>
+<circle cx="1740.16" cy="2651.55" r="37.4016" style=""/>
+<circle cx="2754.65" cy="3863.91" r="37.4016" style=""/>
+<circle cx="2539.37" cy="4255.88" r="37.4016" style=""/>
+<circle cx="2460.63" cy="4255.88" r="37.4016" style=""/>
+<circle cx="2381.89" cy="4255.88" r="37.4016" style=""/>
+<circle cx="2303.15" cy="4255.88" r="37.4016" style=""/>
+<circle cx="2224.41" cy="4255.88" r="37.4016" style=""/>
+<circle cx="4354.33" cy="6574.78" r="37.4016" style=""/>
+<circle cx="2145.67" cy="4255.88" r="37.4016" style=""/>
+<circle cx="2066.93" cy="4255.88" r="37.4016" style=""/>
+<circle cx="954.646" cy="3865.88" r="37.4016" style=""/>
+<circle cx="570.866" cy="4035.41" r="37.4016" style=""/>
+<circle cx="914.646" cy="3003.91" r="37.4016" style=""/>
+<circle cx="914.646" cy="2803.91" r="37.4016" style=""/>
+<circle cx="914.646" cy="2603.91" r="37.4016" style=""/>
+<circle cx="914.646" cy="2403.91" r="37.4016" style=""/>
+<circle cx="914.646" cy="2203.91" r="37.4016" style=""/>
+<circle cx="350.394" cy="2539.35" r="37.4016" style=""/>
+<circle cx="350.394" cy="2460.61" r="37.4016" style=""/>
+<circle cx="350.394" cy="2381.87" r="37.4016" style=""/>
+<circle cx="350.394" cy="2303.13" r="37.4016" style=""/>
+<circle cx="350.394" cy="2224.39" r="37.4016" style=""/>
+<circle cx="350.394" cy="2145.65" r="37.4016" style=""/>
+<circle cx="350.394" cy="2066.91" r="37.4016" style=""/>
+<circle cx="914.646" cy="2003.91" r="37.4016" style=""/>
+<circle cx="914.646" cy="1803.91" r="37.4016" style=""/>
+<circle cx="914.646" cy="1603.91" r="37.4016" style=""/>
+<circle cx="948.661" cy="742.419" r="37.4016" style=""/>
+<circle cx="570.866" cy="570.844" r="37.4016" style=""/>
+<circle cx="-2602.36" cy="2303.13" r="37.4016" style=""/>
 </svg>

scripts/gcode/outline.ngc

@@ -20,93 +20,297 @@ G04 P1.00000 (Wait for spindle to get up to speed)
 G04 P0 ( dwell for no time -- G64 should not smooth over this point )
 G00 Z2.00000 ( retract )
 
-G00 X101.04999 Y-49.99998 ( rapid move to begin. )
+G00 X52.00002 Y-90.92517 ( rapid move to begin. )
 G01 Z-4.00000 F50.00000 ( plunge. )
 G04 P0 ( dwell for no time -- G64 should not smooth over this point )
 G01 F400.00000
-G01 X101.04996 Y-26.29491
 G00 Z0.00000
-G01 X101.04996 Y-23.69491
+G01 X51.99966 Y-90.71861
 G01 Z-4.00000 F50.00000
 G01 F400.00000
-G01 X101.04993 Y0.01016
+G01 X51.99938 Y-90.55170
-G01 X101.03891 Y0.15217
-G01 X101.00876 Y0.29136
-G01 X100.98666 Y0.35911
-G01 X100.95588 Y0.43449
-G01 X100.88826 Y0.55984
-G01 X100.80434 Y0.67490
-G01 X100.70559 Y0.77757
-G01 X100.64323 Y0.82989
-G01 X100.58544 Y0.87163
-G01 X100.46210 Y0.94282
-G01 X100.35911 Y0.98666
-G01 X100.24214 Y1.02169
-G01 X100.12189 Y1.04290
-G01 X100.00000 Y1.04999
-G01 X51.30001 Y1.04999
 G00 Z0.00000
-G01 X48.70001 Y1.04999
+G01 X51.99922 Y-90.45729
+G01 X51.99921 Y-90.45212
+G01 X51.94965 Y-90.54069
+G01 X51.90472 Y-90.60924
+G01 X51.86050 Y-90.66640
+G01 X51.85455 Y-90.67409
+G01 X51.79225 Y-90.74211
+G01 X51.72425 Y-90.80442
+G01 X51.65941 Y-90.85458
+G01 X51.64306 Y-90.86530
+G01 X51.59085 Y-90.89954
+G01 X51.50215 Y-90.94917
+G01 X51.57808 Y-90.94930
 G01 Z-4.00000 F50.00000
 G01 F400.00000
-G01 X0.00002 Y1.04999
+G01 X51.59941 Y-90.94934
-G01 X-0.08133 Y1.04684
-G01 X-0.15215 Y1.03891
-G01 X-0.29134 Y1.00876
-G01 X-0.35908 Y0.98666
-G01 X-0.43447 Y0.95588
-G01 X-0.55982 Y0.88826
-G01 X-0.67488 Y0.80434
-G01 X-0.77755 Y0.70559
-G01 X-0.82987 Y0.64323
-G01 X-0.87160 Y0.58544
-G01 X-0.94280 Y0.46210
-G01 X-0.98664 Y0.35911
-G01 X-1.02167 Y0.24214
-G01 X-1.04288 Y0.12189
-G01 X-1.04996 Y0.00000
-G01 X-1.04994 Y-23.70507
 G00 Z0.00000
-G01 X-1.04994 Y-26.30507
+G01 X51.86031 Y-90.94979
+G01 X51.97523 Y-90.94998
+G01 X51.99885 Y-90.94881
+G01 X52.00002 Y-90.92517
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z2.00000 ( retract )
+
+G00 X-51.49954 Y-90.94907 ( rapid move to begin. )
+G01 Z-4.00000 F50.00000 ( plunge. )
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G01 F400.00000
+G00 Z0.00000
+G01 X-51.50760 Y-90.94906
+G01 X-51.83861 Y-90.94890
+G01 X-51.99881 Y-90.94881
+G01 X-51.99881 Y-90.81165
+G01 X-51.99881 Y-90.78886
+G01 X-51.99881 Y-90.54960
+G01 X-51.99881 Y-90.45003
+G01 X-51.94631 Y-90.53032
+G01 X-51.90694 Y-90.58112
+G01 X-51.88938 Y-90.60378
+G01 X-51.72091 Y-90.77792
+G01 X-51.70116 Y-90.79542
+G01 X-51.63076 Y-90.85778
 G01 Z-4.00000 F50.00000
 G01 F400.00000
-G01 X-1.04991 Y-50.01014
+G01 X-51.62078 Y-90.86662
-G01 X-1.03889 Y-50.15215
-G01 X-1.00874 Y-50.29134
-G01 X-0.98664 Y-50.35908
-G01 X-0.95586 Y-50.43447
-G01 X-0.88824 Y-50.55982
-G01 X-0.80432 Y-50.67488
-G01 X-0.70556 Y-50.77755
-G01 X-0.64321 Y-50.82987
-G01 X-0.58542 Y-50.87160
-G01 X-0.46208 Y-50.94277
-G01 X-0.35908 Y-50.98664
-G01 X-0.24212 Y-51.02167
-G01 X-0.12187 Y-51.04285
-G01 X0.00002 Y-51.04996
-G01 X48.70509 Y-51.04994
 G00 Z0.00000
-G01 X51.30509 Y-51.04994
+G01 X-51.49954 Y-90.94907
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z2.00000 ( retract )
+
+G00 X52.00002 Y-39.53165 ( rapid move to begin. )
+G01 Z-4.00000 F50.00000 ( plunge. )
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G01 F400.00000
+G00 Z0.00000
+G01 X51.99904 Y-39.12963
+G01 X51.99885 Y-39.05113
+G01 X51.86234 Y-39.05103
+G01 X51.82895 Y-39.05101
+G01 X51.61072 Y-39.05085
+G01 X51.50154 Y-39.05077
+G01 X51.58783 Y-39.09875
+G01 X51.65565 Y-39.14285
+G01 X51.71988 Y-39.19205
+G01 X51.75973 Y-39.22776
+G01 X51.78013 Y-39.24605
+G01 X51.84272 Y-39.31214
+G01 X51.85955 Y-39.33333
+G01 X51.89933 Y-39.38341
+G01 X51.92100 Y-39.41578
 G01 Z-4.00000 F50.00000
 G01 F400.00000
-G01 X100.01016 Y-51.04991
+G01 X51.94434 Y-39.45064
-G01 X100.11176 Y-51.04397
+G00 Z0.00000
-G01 X100.21232 Y-51.02824
+G01 X51.99679 Y-39.54362
-G01 X100.31087 Y-51.00290
+G01 X51.99921 Y-39.54790
-G01 X100.40650 Y-50.96805
+G01 X52.00002 Y-39.53165
-G01 X100.49832 Y-50.92418
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
-G01 X100.58544 Y-50.87160
+G00 Z2.00000 ( retract )
-G01 X100.66708 Y-50.81082
+
-G01 X100.74244 Y-50.74242
+G00 X-51.49954 Y-39.05087 ( rapid move to begin. )
-G01 X100.81084 Y-50.66706
+G01 Z-4.00000 F50.00000 ( plunge. )
-G01 X100.87163 Y-50.58542
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
-G01 X100.92420 Y-50.49830
+G01 F400.00000
-G01 X100.97201 Y-50.39708
+G00 Z0.00000
-G01 X101.00587 Y-50.30112
+G01 X-51.83765 Y-39.05105
-G01 X101.03030 Y-50.20231
+G01 Z-4.00000 F50.00000
-G01 X101.04506 Y-50.10163
+G01 F400.00000
-G01 X101.04999 Y-49.99998
+G01 X-51.86302 Y-39.05106
+G00 Z0.00000
+G01 X-51.99881 Y-39.05113
+G01 X-51.99890 Y-39.21225
+G01 X-51.99890 Y-39.21325
+G01 X-51.99909 Y-39.55031
+G01 X-51.91676 Y-39.42809
+G01 X-51.90766 Y-39.41773
+G01 X-51.84620 Y-39.34777
+G01 X-51.82799 Y-39.32705
+G01 X-51.68163 Y-39.18700
+G01 X-51.65139 Y-39.15806
+G01 X-51.63164 Y-39.14290
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-51.57884 Y-39.10236
+G00 Z0.00000
+G01 X-51.49954 Y-39.05087
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z2.00000 ( retract )
+
+G00 X0.59796 Y-90.94917 ( rapid move to begin. )
+G01 Z-4.00000 F50.00000 ( plunge. )
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G01 F400.00000
+G00 Z0.00000
+G01 X-0.38604 Y-90.94915
+G01 X-0.59840 Y-90.94914
+G01 X-0.57576 Y-90.93378
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-0.43737 Y-90.83987
+G00 Z0.00000
+G01 X-0.34275 Y-90.76319
+G01 X-0.24445 Y-90.66063
+G01 X-0.16635 Y-90.55430
+G01 X-0.09787 Y-90.42982
+G01 X-0.04682 Y-90.29723
+G01 X-0.01413 Y-90.15898
+G01 X-0.00041 Y-90.01757
+G01 X-0.00040 Y-89.77894
+G01 X-0.00038 Y-88.78861
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-0.00022 Y-80.67196
+G00 Z0.00000
+G01 X-0.00017 Y-78.07196
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X0.00002 Y-68.72635
+G01 X0.00095 Y-89.80499
+G00 Z0.00000
+G01 X0.00096 Y-90.03035
+G01 X0.01481 Y-90.17231
+G01 X0.04775 Y-90.31107
+G01 X0.09918 Y-90.44409
+G01 X0.16817 Y-90.56893
+G01 X0.25344 Y-90.68323
+G01 X0.35341 Y-90.78496
+G01 X0.46626 Y-90.87218
+G01 X0.59250 Y-90.94598
+G01 X0.59796 Y-90.94917
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z2.00000 ( retract )
+
+G00 X0.59796 Y-39.05077 ( rapid move to begin. )
+G01 Z-4.00000 F50.00000 ( plunge. )
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G01 F400.00000
+G00 Z0.00000
+G01 X-0.38717 Y-39.05079
+G01 X-0.59916 Y-39.05080
+G01 X-0.57714 Y-39.06571
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-0.43132 Y-39.16444
+G00 Z0.00000
+G01 X-0.34450 Y-39.23515
+G01 X-0.25230 Y-39.33002
+G01 X-0.16724 Y-39.44427
+G01 X-0.09840 Y-39.56901
+G01 X-0.04707 Y-39.70190
+G01 X-0.01420 Y-39.84051
+G01 X-0.00041 Y-39.98229
+G01 X-0.00040 Y-40.22440
+G01 X-0.00038 Y-41.21107
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-0.00022 Y-49.32795
+G00 Z0.00000
+G01 X-0.00017 Y-51.92795
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X0.00002 Y-61.27361
+G01 X0.00095 Y-40.19495
+G00 Z0.00000
+G01 X0.00096 Y-39.96959
+G01 X0.01481 Y-39.82763
+G01 X0.04775 Y-39.68887
+G01 X0.09918 Y-39.55585
+G01 X0.16817 Y-39.43101
+G01 X0.25344 Y-39.31671
+G01 X0.35341 Y-39.21498
+G01 X0.46626 Y-39.12776
+G01 X0.59665 Y-39.05154
+G01 X0.59796 Y-39.05077
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G00 Z2.00000 ( retract )
+
+G00 X54.20002 Y-37.91288 ( rapid move to begin. )
+G01 Z-4.00000 F50.00000 ( plunge. )
+G04 P0 ( dwell for no time -- G64 should not smooth over this point )
+G01 F400.00000
+G01 X54.19509 Y-37.81123
+G01 X54.18033 Y-37.71054
+G01 X54.15592 Y-37.61176
+G01 X54.12204 Y-37.51580
+G01 X54.07904 Y-37.42357
+G01 X54.02732 Y-37.33592
+G01 X53.96735 Y-37.25372
+G01 X53.89969 Y-37.17768
+G01 X53.82501 Y-37.10856
+G01 X53.74398 Y-37.04699
+G01 X53.65737 Y-36.99358
+G01 X53.55663 Y-36.94478
+G01 X53.46100 Y-36.90998
+G01 X53.36245 Y-36.88458
+G01 X53.26192 Y-36.86884
+G01 X53.16032 Y-36.86292
+G01 X1.30565 Y-36.85680
+G00 Z0.00000
+G01 X-1.29435 Y-36.85649
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-53.14902 Y-36.85037
+G01 X-53.27092 Y-36.85746
+G01 X-53.39118 Y-36.87864
+G01 X-53.50818 Y-36.91367
+G01 X-53.62029 Y-36.96200
+G01 X-53.74295 Y-37.03442
+G01 X-53.85468 Y-37.12276
+G01 X-53.95344 Y-37.22540
+G01 X-54.03739 Y-37.34046
+G01 X-54.10500 Y-37.46584
+G01 X-54.15501 Y-37.59919
+G01 X-54.17533 Y-37.67806
+G01 X-54.18806 Y-37.74816
+G01 X-54.19908 Y-37.89017
+G01 X-54.19932 Y-63.69465
+G00 Z0.00000
+G01 X-54.19935 Y-66.29465
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X-54.19959 Y-92.09913
+G01 X-54.19250 Y-92.22102
+G01 X-54.17129 Y-92.34129
+G01 X-54.13627 Y-92.45826
+G01 X-54.08791 Y-92.57038
+G01 X-54.01552 Y-92.69303
+G01 X-53.97323 Y-92.75039
+G01 X-53.92029 Y-92.81226
+G01 X-53.81668 Y-92.91000
+G01 X-53.70081 Y-92.99280
+G01 X-53.57480 Y-93.05920
+G01 X-53.50871 Y-93.08582
+G01 X-53.43119 Y-93.11068
+G01 X-53.29169 Y-93.13949
+G01 X-53.14960 Y-93.14914
+G01 X-1.30022 Y-93.14935
+G00 Z0.00000
+G01 X1.29978 Y-93.14936
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X53.14917 Y-93.14957
+G01 X53.27106 Y-93.14249
+G01 X53.39133 Y-93.12128
+G01 X53.50830 Y-93.08625
+G01 X53.62041 Y-93.03789
+G01 X53.74307 Y-92.96550
+G01 X53.85478 Y-92.87716
+G01 X53.95351 Y-92.77452
+G01 X54.03746 Y-92.65945
+G01 X54.07340 Y-92.59791
+G01 X54.10924 Y-92.52481
+G01 X54.15793 Y-92.39098
+G01 X54.18810 Y-92.25176
+G01 X54.19913 Y-92.10977
+G01 X54.19955 Y-66.31133
+G00 Z0.00000
+G01 X54.19959 Y-63.71133
+G01 Z-4.00000 F50.00000
+G01 F400.00000
+G01 X54.20002 Y-37.91288
 
 G04 P0 ( dwell for no time -- G64 should not smooth over this point )
 G00 Z35.000000 ( retract )

scripts/myPreset.json

@@ -0,0 +1,88 @@
+{
+    "layout": {
+        "type": "grid",
+        "rows": 1,
+        "cols": 2,
+        "hspace": "2.1mm",
+        "vspace": "2.1mm"
+    },
+    "tabs": {
+        "type": "fixed",
+        "hcount": 1,
+        "vcount": 1,
+        "hwidth": "3mm",
+        "vwidth": "3mm"
+    },
+    "cuts": {
+        "type": "mousebites",
+        "offset": "0.2mm",
+        "prolong": "0.7mm",
+        "drill": "0.5mm",
+        "spacing": "0.8mm"
+    },
+    "framing": {
+        "type": "tightframe",
+        "copperFill": true,
+        "slotwidth": "2.1mm",
+        "mintotalheight": "100mm",
+        "mintotalwidth": "160mm",
+        "maxtotalheight": "100mm",
+        "maxtotalwidth": "160mm"
+    },
+    "tooling": {
+        "type": "plugin",
+        "code": "tooling_plugin.py.CustomTooling",
+        "arg": ""
+    },
+    "text": {
+        "type": "simple",
+        "text": "v1",
+        "anchor": "mt",
+        "hoffset": "0mm",
+        "voffset": "2.5mm",
+        "orientation": "0deg",
+        "width": "1.5mm",
+        "height": "1.5mm",
+        "hjustify": "center",
+        "vjustify": "center",
+        "thickness": "0.3mm",
+        "layer": "F.SilkS"
+    },
+     "copperfill": {
+        "type": "solid",
+        "clearance": "0.5mm",
+        "edgeclearance": "0.5mm",
+        "layers": "B.Cu"        
+    },
+    "post": {
+        "type": "auto",
+        "copperfill": false,
+        "reconstructarcs": false,
+        "millradius": "1mm",
+        "millradiusouter": "0mm",
+        "script": "",
+        "scriptarg": "",
+        "origin": "tl",
+        "refillzones": false,
+        "dimensions": false,
+        "edgewidth": "0.1mm"
+    },
+    "page": {
+        "type": "inherit",
+        "anchor": "tl",
+        "posx": "0mm",
+        "posy": "0mm",
+        "width": "1000mm",
+        "height": "1000mm"
+    },
+        "debug": {
+        "type": "none",
+        "drawPartitionLines": false,
+        "drawBackboneLines": false,
+        "drawboxes": false,
+        "trace": false,
+        "deterministic": false,
+        "drawtabfail": false,
+        "drawTabFillet": false
+    }
+}

scripts/output/Flow_Controller_Panel-job.gbrjob

@@ -5,7 +5,7 @@
       "Application": "Pcbnew",
       "Version": "9.0.9-9.0.9~ubuntu24.04.1"
     },
-    "CreationDate": "2026-05-16T18:36:28+02:00"
+    "CreationDate": "2026-05-20T19:29:47+02:00"
   },
   "GeneralSpecs": {
     "ProjectId": {
@@ -14,8 +14,8 @@
       "Revision": "rev?"
     },
     "Size": {
-      "X": 100.1,
+      "X": 106.3996,
-      "Y": 50.1
+      "Y": 54.2993
     },
     "LayerNumber": 2,
     "BoardThickness": 1.6002,

scripts/output/Flow_Controller_Panel.drl

@@ -1,7 +1,7 @@
 M48
-; DRILL file {KiCad 9.0.9-9.0.9~ubuntu24.04.1} date 2026-05-16T18:36:28+0200
+; DRILL file {KiCad 9.0.9-9.0.9~ubuntu24.04.1} date 2026-05-20T19:29:47+0200
 ; FORMAT={-:-/ absolute / metric / decimal}
-; #@! TF.CreationDate,2026-05-16T18:36:28+02:00
+; #@! TF.CreationDate,2026-05-20T19:29:47+02:00
 ; #@! TF.GenerationSoftware,Kicad,Pcbnew,9.0.9-9.0.9~ubuntu24.04.1
 ; #@! TF.FileFunction,MixedPlating,1,2
 FMAT,2
@@ -13,92 +13,135 @@ T2C1.000
 ; #@! TA.AperFunction,Plated,PTH,ComponentDrill
 T3C1.000
 ; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
-T4C1.000
+T4C0.500
 ; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
-T5C3.200
+T5C2.150
+; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
+T6C2.700
+; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill
+T7C3.172
 %
 G90
 G05
 T1
-X30.0Y-39.918
+X93.5Y-53.0
-X30.0Y-42.418
+X93.5Y-55.5
-X30.0Y-44.918
+X93.5Y-58.0
-X44.55Y-13.0
+X93.55Y-73.85
-X44.55Y-15.5
+X93.55Y-76.35
-X44.55Y-18.0
+X93.55Y-78.85
-X80.0Y-39.918
+X145.6Y-53.0
-X80.0Y-42.418
+X145.6Y-55.5
-X80.0Y-44.918
+X145.6Y-58.0
-X94.55Y-13.0
+X145.65Y-73.85
-X94.55Y-15.5
+X145.65Y-76.35
-X94.55Y-18.0
+X145.65Y-78.85
 T2
-X17.75Y-25.675
+X66.7Y-65.675
-X17.85Y-29.425
+X66.8Y-69.425
-X67.75Y-25.675
+X118.8Y-65.675
-X67.85Y-29.425
+X118.9Y-69.425
 T3
-X7.366Y-16.12
+X56.316Y-56.12
-X7.366Y-18.66
+X56.316Y-58.66
-X7.366Y-21.2
+X56.316Y-61.2
-X7.366Y-23.74
+X56.316Y-63.74
-X7.366Y-26.28
+X56.316Y-66.28
-X7.366Y-28.82
+X56.316Y-68.82
-X7.366Y-31.36
+X56.316Y-71.36
-X7.366Y-33.9
+X56.316Y-73.9
-X32.766Y-6.096
+X85.87Y-45.55
-X35.306Y-6.096
+X88.41Y-45.55
-X37.846Y-6.096
+X90.95Y-45.55
-X57.366Y-16.12
+X108.416Y-56.12
-X57.366Y-18.66
+X108.416Y-58.66
-X57.366Y-21.2
+X108.416Y-61.2
-X57.366Y-23.74
+X108.416Y-63.74
-X57.366Y-26.28
+X108.416Y-66.28
-X57.366Y-28.82
+X108.416Y-68.82
-X57.366Y-31.36
+X108.416Y-71.36
-X57.366Y-33.9
+X108.416Y-73.9
-X82.766Y-6.096
+X137.97Y-45.55
-X85.306Y-6.096
+X140.51Y-45.55
-X87.846Y-6.096
+X143.05Y-45.55
 T4
-X50.0Y-2.0
+X49.15Y-62.0
-X50.0Y-3.533
+X49.15Y-63.0
-X50.0Y-5.067
+X49.15Y-64.0
-X50.0Y-6.6
+X49.15Y-65.0
-X50.0Y-8.133
+X49.15Y-66.0
-X50.0Y-9.667
+X49.15Y-67.0
-X50.0Y-11.2
+X49.15Y-68.0
-X50.0Y-12.733
+X70.95Y-40.2
-X50.0Y-14.267
+X70.95Y-89.8
-X50.0Y-15.8
+X71.95Y-40.2
-X50.0Y-17.333
+X71.95Y-89.8
-X50.0Y-18.867
+X72.95Y-40.2
-X50.0Y-20.4
+X72.95Y-89.8
-X50.0Y-21.933
+X73.95Y-40.2
-X50.0Y-23.467
+X73.95Y-89.8
-X50.0Y-25.0
+X74.95Y-40.2
-X50.0Y-26.533
+X74.95Y-89.8
-X50.0Y-28.067
+X75.95Y-40.2
-X50.0Y-29.6
+X75.95Y-89.8
-X50.0Y-31.133
+X76.95Y-40.2
-X50.0Y-32.667
+X76.95Y-89.8
-X50.0Y-34.2
+X98.75Y-62.0
-X50.0Y-35.733
+X98.75Y-63.0
-X50.0Y-37.267
+X98.75Y-64.0
-X50.0Y-38.8
+X98.75Y-65.0
-X50.0Y-40.333
+X98.75Y-66.0
-X50.0Y-41.867
+X98.75Y-67.0
-X50.0Y-43.4
+X98.75Y-68.0
-X50.0Y-44.933
+X101.25Y-62.0
-X50.0Y-46.467
+X101.25Y-63.0
-X50.0Y-48.0
+X101.25Y-64.0
+X101.25Y-65.0
+X101.25Y-66.0
+X101.25Y-67.0
+X101.25Y-68.0
+X123.05Y-40.2
+X123.05Y-89.8
+X124.05Y-40.2
+X124.05Y-89.8
+X125.05Y-40.2
+X125.05Y-89.8
+X126.05Y-40.2
+X126.05Y-89.8
+X127.05Y-40.2
+X127.05Y-89.8
+X128.05Y-40.2
+X128.05Y-89.8
+X129.05Y-40.2
+X129.05Y-89.8
+X150.85Y-62.0
+X150.85Y-63.0
+X150.85Y-64.0
+X150.85Y-65.0
+X150.85Y-66.0
+X150.85Y-67.0
+X150.85Y-68.0
 T5
-X4.6Y-4.6
+X56.748Y-45.179
-X4.6Y-45.4
+X56.824Y-84.847
-X45.4Y-4.6
+X79.633Y-45.147
-X45.4Y-45.4
+X79.684Y-84.822
-X54.6Y-4.6
+X108.848Y-45.179
-X54.6Y-45.4
+X108.924Y-84.847
-X95.4Y-4.6
+X131.733Y-45.147
-X95.4Y-45.4
+X131.784Y-84.822
+T6
+X51.95Y-43.0
+X51.95Y-87.0
+X95.95Y-43.0
+X95.95Y-87.0
+X104.05Y-43.0
+X104.05Y-87.0
+X148.05Y-43.0
+X148.05Y-87.0
+T7
+X11.65Y-65.0
+X100.0Y-10.75
+X100.0Y-119.25
+X188.35Y-65.0
 M30

scripts/panel/Flow_Controller_Panel.kicad_prl

@@ -1,6 +1,6 @@
 {
   "board": {
-    "active_layer": 17,
+    "active_layer": 0,
     "active_layer_preset": "",
     "auto_track_width": true,
     "hidden_netclasses": [],
@@ -40,7 +40,6 @@
       "footprint_references",
       "tracks",
       "drc_errors",
-      "drawing_sheet",
       "bitmaps",
       "pads",
       "zones",
@@ -50,7 +49,7 @@
       "conflict_shadows",
       "shapes"
     ],
-    "visible_layers": "00000000_00000000_0fffffff_fffffffe",
+    "visible_layers": "00000000_00000000_0fffffff_ffffffff",
     "zone_display_mode": 0
   },
   "git": {

scripts/panel/Flow_Controller_Panel.kicad_pro

@@ -37,9 +37,9 @@
         "other_text_thickness": 0.15,
         "other_text_upright": false,
         "pads": {
-          "drill": 0.95,
+          "drill": 0.0,
-          "height": 1.95,
+          "height": 0.4,
-          "width": 1.7
+          "width": 1.325
         },
         "silk_line_width": 0.1524,
         "silk_text_italic": false,
@@ -123,7 +123,7 @@
       },
       "rules": {
         "max_error": 0.005,
-        "min_clearance": 0.3,
+        "min_clearance": 0.25,
         "min_connection": 0.0,
         "min_copper_edge_clearance": 0.5,
         "min_groove_width": 0.0,
@@ -321,45 +321,29 @@
     "net_colors": null,
     "netclass_assignments": null,
     "netclass_patterns": [
-      {
-        "netclass": "Board_0-Default",
-        "pattern": "Board_0-/FLOW_PULSE_MCU"
-      },
-      {
-        "netclass": "Board_0-Default",
-        "pattern": "Board_0-+5V"
-      },
       {
         "netclass": "Board_0-Default",
         "pattern": "Board_0-GND"
       },
-      {
-        "netclass": "Board_0-Default",
-        "pattern": "Board_0-/SWIO"
-      },
-      {
-        "netclass": "Board_0-Default",
-        "pattern": "Board_0-/I2C_SCL"
-      },
-      {
-        "netclass": "Board_0-Default",
-        "pattern": "Board_0-/ALARM _CNC"
-      },
-      {
-        "netclass": "Board_0-Default",
-        "pattern": "Board_0-unconnected-(J3-#-Pad6)"
-      },
       {
         "netclass": "Board_0-Default",
         "pattern": "Board_0-/RAW_SENSOR"
       },
+      {
+        "netclass": "Board_0-Default",
+        "pattern": "Board_0-Net-(Q1-G)"
+      },
       {
         "netclass": "Board_0-Default",
         "pattern": "Board_0-/ALARM_TRIGGER"
       },
       {
         "netclass": "Board_0-Default",
-        "pattern": "Board_0-/I2C_SDA"
+        "pattern": "Board_0-/SWIO"
+      },
+      {
+        "netclass": "Board_0-Default",
+        "pattern": "Board_0-Net-(J3-UP)"
       },
       {
         "netclass": "Board_0-Default",
@@ -367,7 +351,23 @@
       },
       {
         "netclass": "Board_0-Default",
-        "pattern": "Board_0-Net-(Q1-G)"
+        "pattern": "Board_0-/I2C_SDA"
+      },
+      {
+        "netclass": "Board_0-Default",
+        "pattern": "Board_0-unconnected-(J3-#-Pad6)"
+      },
+      {
+        "netclass": "Board_0-Default",
+        "pattern": "Board_0-+3.3V"
+      },
+      {
+        "netclass": "Board_0-Default",
+        "pattern": "Board_0-+5V"
+      },
+      {
+        "netclass": "Board_0-Default",
+        "pattern": "Board_0-/ALARM _CNC"
       },
       {
         "netclass": "Board_0-Default",
@@ -375,11 +375,19 @@
       },
       {
         "netclass": "Board_0-Default",
-        "pattern": "Board_0-Net-(J3-UP)"
+        "pattern": "Board_0-/I2C_SCL"
+      },
+      {
+        "netclass": "Board_0-Default",
+        "pattern": "Board_0-/FLOW_PULSE_MCU"
       },
       {
         "netclass": "Board_1-Default",
-        "pattern": "Board_1-GND"
+        "pattern": "Board_1-/I2C_SCL"
+      },
+      {
+        "netclass": "Board_1-Default",
+        "pattern": "Board_1-/RAW_SENSOR"
       },
       {
         "netclass": "Board_1-Default",
@@ -387,20 +395,40 @@
       },
       {
         "netclass": "Board_1-Default",
-        "pattern": "Board_1-/FLOW_PULSE_MCU"
+        "pattern": "Board_1-Net-(Q1-G)"
       },
       {
         "netclass": "Board_1-Default",
-        "pattern": "Board_1-unconnected-(J3-*-Pad5)"
+        "pattern": "Board_1-GND"
       },
       {
         "netclass": "Board_1-Default",
         "pattern": "Board_1-unconnected-(J3-#-Pad6)"
       },
+      {
+        "netclass": "Board_1-Default",
+        "pattern": "Board_1-+5V"
+      },
       {
         "netclass": "Board_1-Default",
         "pattern": "Board_1-/I2C_SDA"
       },
+      {
+        "netclass": "Board_1-Default",
+        "pattern": "Board_1-unconnected-(J3-*-Pad5)"
+      },
+      {
+        "netclass": "Board_1-Default",
+        "pattern": "Board_1-/ALARM_TRIGGER"
+      },
+      {
+        "netclass": "Board_1-Default",
+        "pattern": "Board_1-/BUTTON_ADC"
+      },
+      {
+        "netclass": "Board_1-Default",
+        "pattern": "Board_1-+3.3V"
+      },
       {
         "netclass": "Board_1-Default",
         "pattern": "Board_1-Net-(J3-UP)"
@@ -411,27 +439,7 @@
       },
       {
         "netclass": "Board_1-Default",
-        "pattern": "Board_1-/I2C_SCL"
+        "pattern": "Board_1-/FLOW_PULSE_MCU"
-      },
-      {
-        "netclass": "Board_1-Default",
-        "pattern": "Board_1-Net-(Q1-G)"
-      },
-      {
-        "netclass": "Board_1-Default",
-        "pattern": "Board_1-/BUTTON_ADC"
-      },
-      {
-        "netclass": "Board_1-Default",
-        "pattern": "Board_1-/ALARM_TRIGGER"
-      },
-      {
-        "netclass": "Board_1-Default",
-        "pattern": "Board_1-/RAW_SENSOR"
-      },
-      {
-        "netclass": "Board_1-Default",
-        "pattern": "Board_1-+5V"
       }
     ]
   },

scripts/tooling_plugin.py

@@ -0,0 +1,130 @@
+from kikit.plugin import ToolingPlugin
+import pcbnew
+
+class CustomTooling(ToolingPlugin):
+    def buildTooling(self, panel):
+        board = panel.board
+
+        # panelBBox() -> (xmin, ymin, xmax, ymax) 
+        xmin, ymin, xmax, ymax = panel.panelBBox()
+
+        min_x = pcbnew.ToMM(xmin)
+        min_y = pcbnew.ToMM(ymin)
+        max_x = pcbnew.ToMM(xmax)
+        max_y = pcbnew.ToMM(ymax)
+
+        margin_x_mm = 10
+        margin_y_mm = 2.5
+
+        center_x = (min_x + max_x) / 2
+        center_y = (min_y + max_y) / 2
+
+        holes = [
+            (min_x + margin_x_mm, min_y + margin_y_mm),         # top left
+            (center_x, min_y + margin_y_mm),                    # top center
+            (max_x - margin_x_mm, min_y + margin_y_mm),         # top right
+
+            (min_x + margin_x_mm, max_y - margin_y_mm),      # bottom left
+            (center_x, max_y - margin_y_mm),                 # bottom center
+            (max_x - margin_x_mm, max_y - margin_y_mm),      # bottom right
+        ]
+
+        hole_d = pcbnew.FromMM(3.172)
+
+        for x_mm, y_mm in holes:
+            fp = pcbnew.FOOTPRINT(board)
+            fp.SetReference("")
+
+            pos = pcbnew.VECTOR2I(
+                pcbnew.FromMM(x_mm),
+                pcbnew.FromMM(y_mm)
+            )
+
+            fp.SetPosition(pos)
+
+            pad = pcbnew.PAD(fp)
+            pad.SetShape(pcbnew.PAD_SHAPE_CIRCLE)
+            pad.SetAttribute(pcbnew.PAD_ATTRIB_NPTH)
+
+            pad.SetSize(pcbnew.VECTOR2I(hole_d, hole_d))
+            pad.SetDrillSize(pcbnew.VECTOR2I(hole_d, hole_d))
+            pad.SetPosition(pos)
+
+            fp.Add(pad)
+            board.Add(fp)
+        
+        # =========================
+        # SCREEN RECTANGLE
+        # =========================
+
+        screen_w = 153.4
+        screen_h = 87.0
+
+        # Panel center
+        center_x = (min_x + max_x) / 2
+        center_y = (min_y + max_y) / 2
+
+        # Screen rectangle corners
+        screen_x0 = center_x - (screen_w / 2)
+        screen_y0 = center_y - (screen_h / 2)
+
+        screen_x1 = center_x + (screen_w / 2)
+        screen_y1 = center_y + (screen_h / 2)
+
+        screen = pcbnew.PCB_SHAPE(board)
+        screen.SetShape(pcbnew.SHAPE_T_RECT)
+        screen.SetLayer(pcbnew.Dwgs_User)
+
+        screen.SetStart(
+            pcbnew.VECTOR2I(
+                pcbnew.FromMM(screen_x0),
+                pcbnew.FromMM(screen_y0)
+            )
+        )
+
+        screen.SetEnd(
+            pcbnew.VECTOR2I(
+                pcbnew.FromMM(screen_x1),
+                pcbnew.FromMM(screen_y1)
+            )
+        )
+
+        screen.SetWidth(pcbnew.FromMM(0.2))
+
+        board.Add(screen)
+
+        # =========================
+        # FIXTURE RECTANGLE
+        # =========================
+
+        fixture_w = 200.0
+        fixture_h = 130.0
+
+        # Fixture rectangle corners
+        fixture_x0 = center_x - (fixture_w / 2)
+        fixture_y0 = center_y - (fixture_h / 2)
+
+        fixture_x1 = center_x + (fixture_w / 2)
+        fixture_y1 = center_y + (fixture_h / 2)
+
+        fixture = pcbnew.PCB_SHAPE(board)
+        fixture.SetShape(pcbnew.SHAPE_T_RECT)
+        fixture.SetLayer(pcbnew.Dwgs_User)
+
+        fixture.SetStart(
+            pcbnew.VECTOR2I(
+                pcbnew.FromMM(fixture_x0),
+                pcbnew.FromMM(fixture_y0)
+            )
+        )
+
+        fixture.SetEnd(
+            pcbnew.VECTOR2I(
+                pcbnew.FromMM(fixture_x1),
+                pcbnew.FromMM(fixture_y1)
+            )
+        )
+
+        fixture.SetWidth(pcbnew.FromMM(0.2))
+
+        board.Add(fixture)